From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4B474BA5.8020202@domain.hid> Date: Fri, 08 Jan 2010 16:13:41 +0100 From: Bernhard Pfund MIME-Version: 1.0 References: <4B209B9C.7010309@domain.hid> <20100108105925.GA14163@domain.hid> <1262949018.2455.5.camel@domain.hid> In-Reply-To: <1262949018.2455.5.camel@domain.hid> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Adeos-main] I-pipe for 2.6.32 PPC List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Philippe Gerum Cc: adeos-main@gna.org Philippe Gerum wrote: > On Fri, 2010-01-08 at 11:59 +0100, Richard Cochran wrote: >> On Thu, Dec 10, 2009 at 07:56:28AM +0100, Bernhard Pfund wrote: >>> I'm currently working with a fairly new ppc development board (P2020RDB) by >>> Freescale. The board's BSP went mainline with 2.6.32 and I'd like to deploy an >>> I-pipe enabled DENX kernel for testing. Now, is there an I-pipe patch for said >>> kernel on the release schedule anywhere soon? >> I got ipipe-2.6.30 running the p2020ds with minimal effort. I can post >> a diff if that might help you. >> >> I should have my own p2020rdb soon... >> >> I have noticed some unexplained freezes running xenomai programs on >> the p2020ds in SMP mode, but I have not yet had time to look into >> it. I hope we can work together to get SMP working reliably. > > I'm working on fixing the pipeline for 2.6.32/ppc64, which includes SMP > mode. 32bit looks ok in UP mode, but I still need to validate SMP there. > So it would be great if you could hammer that patch over your P2020 as > well once it's ready. ETA, early next week. I'll keep you informed about > this. Philippe, Richard Due to a change of project priorities I'm currently working on a PPC750GX based system (which will require the same kernel and pipeline), but I still have the P2020RDB available, so I can (an will) test whatever you come up with ;) Thanx for the ongoing efforts! Bernhard