From: "Németh Márton" <nm127@freemail.hu>
To: Greg Kroah-Hartman <gregkh@suse.de>
Cc: devel@driverdev.osuosl.org, LKML <linux-kernel@vger.kernel.org>,
Julia Lawall <julia@diku.dk>,
cocci@diku.dk
Subject: [PATCH 2/3] staging: make USB device id constant
Date: Sun, 10 Jan 2010 00:18:34 +0100 [thread overview]
Message-ID: <4B490ECA.6040108@freemail.hu> (raw)
From: Márton Németh <nm127@freemail.hu>
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
---
diff -u -p a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
--- a/drivers/staging/serqt_usb2/serqt_usb2.c 2010-01-07 19:08:46.000000000 +0100
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c 2010-01-08 09:53:37.000000000 +0100
@@ -126,7 +126,7 @@ static int debug;
#define MODEM_CTRL 0x40
#define RS232_MODE 0x00
-static struct usb_device_id serqt_id_table[] = {
+static const struct usb_device_id serqt_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)},
diff -u -p a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
--- a/drivers/staging/line6/driver.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/line6/driver.c 2010-01-08 09:56:21.000000000 +0100
@@ -33,7 +33,7 @@
/* table of devices that work with this driver */
-static struct usb_device_id line6_id_table[] = {
+static const struct usb_device_id line6_id_table[] = {
{ USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXT) },
{ USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXTLIVE) },
{ USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXTPRO) },
diff -u -p a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
--- a/drivers/staging/winbond/wbusb.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/winbond/wbusb.c 2010-01-08 09:58:45.000000000 +0100
@@ -23,7 +23,7 @@ MODULE_DESCRIPTION("IS89C35 802.11bg WLA
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
-static struct usb_device_id wb35_table[] __devinitdata = {
+static const struct usb_device_id wb35_table[] __devinitconst = {
{ USB_DEVICE(0x0416, 0x0035) },
{ USB_DEVICE(0x18E8, 0x6201) },
{ USB_DEVICE(0x18E8, 0x6206) },
diff -u -p a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
--- a/drivers/staging/rtl8192su/r8192U_core.c 2010-01-07 19:08:46.000000000 +0100
+++ b/drivers/staging/rtl8192su/r8192U_core.c 2010-01-08 10:01:12.000000000 +0100
@@ -110,7 +110,7 @@ u32 rt_global_debug_component = \
#define TOTAL_CAM_ENTRY 32
#define CAM_CONTENT_COUNT 8
-static struct usb_device_id rtl8192_usb_id_tbl[] = {
+static const struct usb_device_id rtl8192_usb_id_tbl[] = {
/* Realtek */
{USB_DEVICE(0x0bda, 0x8192)},
{USB_DEVICE(0x0bda, 0x8709)},
diff -u -p a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
--- a/drivers/staging/comedi/drivers/dt9812.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/comedi/drivers/dt9812.c 2010-01-08 10:10:15.000000000 +0100
@@ -264,7 +264,7 @@ struct dt9812_usb_cmd {
static DECLARE_MUTEX(dt9812_mutex);
-static struct usb_device_id dt9812_table[] = {
+static const struct usb_device_id dt9812_table[] = {
{USB_DEVICE(0x0867, 0x9812)},
{} /* Terminating entry */
};
diff -u -p a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
--- a/drivers/staging/comedi/drivers/usbduxfast.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/comedi/drivers/usbduxfast.c 2010-01-08 10:10:57.000000000 +0100
@@ -1769,7 +1769,7 @@ static struct comedi_driver driver_usbdu
/*
* Table with the USB-devices: just now only testing IDs
*/
-static struct usb_device_id usbduxfastsub_table[] = {
+static const struct usb_device_id usbduxfastsub_table[] = {
/* { USB_DEVICE(0x4b4, 0x8613) }, testing */
{USB_DEVICE(0x13d8, 0x0010)}, /* real ID */
{USB_DEVICE(0x13d8, 0x0011)}, /* real ID */
diff -u -p a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
--- a/drivers/staging/comedi/drivers/usbdux.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/comedi/drivers/usbdux.c 2010-01-08 10:13:48.000000000 +0100
@@ -2833,7 +2833,7 @@ static struct comedi_driver driver_usbdu
};
/* Table with the USB-devices: just now only testing IDs */
-static struct usb_device_id usbduxsub_table[] = {
+static const struct usb_device_id usbduxsub_table[] = {
{USB_DEVICE(0x13d8, 0x0001)},
{USB_DEVICE(0x13d8, 0x0002)},
{} /* Terminating entry */
diff -u -p a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
--- a/drivers/staging/comedi/drivers/vmk80xx.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/comedi/drivers/vmk80xx.c 2010-01-08 10:14:14.000000000 +0100
@@ -75,7 +75,7 @@ enum {
DEVICE_VMK8061
};
-static struct usb_device_id vmk80xx_id_table[] = {
+static const struct usb_device_id vmk80xx_id_table[] = {
{USB_DEVICE(0x10cf, 0x5500), .driver_info = DEVICE_VMK8055},
{USB_DEVICE(0x10cf, 0x5501), .driver_info = DEVICE_VMK8055},
{USB_DEVICE(0x10cf, 0x5502), .driver_info = DEVICE_VMK8055},
diff -u -p a/drivers/staging/mimio/mimio.c b/drivers/staging/mimio/mimio.c
--- a/drivers/staging/mimio/mimio.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/mimio/mimio.c 2010-01-08 10:33:06.000000000 +0100
@@ -145,7 +145,7 @@ static void mimio_rx_handler(struct mimi
static int mimio_tx(struct mimio *, const char *, int);
static char mimio_name[] = "VirtualInk mimio-Xi";
-static struct usb_device_id mimio_table [] = {
+static const struct usb_device_id mimio_table[] = {
{ USB_DEVICE(MIMIO_VENDOR_ID, MIMIO_PRODUCT_ID) },
{ USB_DEVICE(0x0525, 0xa4a0) }, /* gadget zero firmware */
{ }
diff -u -p a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
--- a/drivers/staging/go7007/go7007-usb.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/go7007/go7007-usb.c 2010-01-08 10:39:47.000000000 +0100
@@ -444,7 +444,7 @@ static struct go7007_usb_board board_sen
},
};
-static struct usb_device_id go7007_usb_id_table[] = {
+static const struct usb_device_id go7007_usb_id_table[] = {
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
USB_DEVICE_ID_MATCH_INT_INFO,
diff -u -p a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c
--- a/drivers/staging/go7007/s2250-loader.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/go7007/s2250-loader.c 2010-01-08 10:42:54.000000000 +0100
@@ -148,7 +148,7 @@ static void s2250loader_disconnect(struc
unlock_kernel();
}
-static struct usb_device_id s2250loader_ids[] = {
+static const struct usb_device_id s2250loader_ids[] = {
{USB_DEVICE(0x1943, 0xa250)},
{} /* Terminating entry */
};
diff -u -p a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c
--- a/drivers/staging/otus/zdusb.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/otus/zdusb.c 2010-01-08 10:47:44.000000000 +0100
@@ -45,7 +45,7 @@ MODULE_LICENSE("Dual BSD/GPL");
static const char driver_name[] = "Otus";
/* table of devices that work with this driver */
-static struct usb_device_id zd1221_ids [] = {
+static const struct usb_device_id zd1221_ids[] = {
{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
{ USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
diff -u -p a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
--- a/drivers/staging/rtl8192u/r8192U_core.c 2010-01-07 19:08:46.000000000 +0100
+++ b/drivers/staging/rtl8192u/r8192U_core.c 2010-01-08 10:51:26.000000000 +0100
@@ -104,7 +104,7 @@ u32 rt_global_debug_component = \
#define TOTAL_CAM_ENTRY 32
#define CAM_CONTENT_COUNT 8
-static struct usb_device_id rtl8192_usb_id_tbl[] = {
+static const struct usb_device_id rtl8192_usb_id_tbl[] = {
/* Realtek */
{USB_DEVICE(0x0bda, 0x8192)},
{USB_DEVICE(0x0bda, 0x8709)},
diff -u -p a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
--- a/drivers/staging/udlfb/udlfb.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/udlfb/udlfb.c 2010-01-08 10:54:45.000000000 +0100
@@ -112,7 +112,7 @@ static struct usb_device_id id_table []
};
*/
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
{.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
{},
};
diff -u -p a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
--- a/drivers/staging/quatech_usb2/quatech_usb2.c 2010-01-07 19:08:45.000000000 +0100
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c 2010-01-08 11:00:33.000000000 +0100
@@ -116,7 +116,7 @@ static int debug;
#define FOURTHCHAR ((unsigned char *)(urb->transfer_buffer))[i + 3]
#define FIFTHCHAR ((unsigned char *)(urb->transfer_buffer))[i + 4]
-static struct usb_device_id quausb2_id_table[] = {
+static const struct usb_device_id quausb2_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
diff -u -p a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
--- a/drivers/staging/frontier/tranzport.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/frontier/tranzport.c 2010-01-08 11:03:26.000000000 +0100
@@ -55,7 +55,7 @@
#endif
/* table of devices that work with this driver */
-static struct usb_device_id usb_tranzport_table[] = {
+static const struct usb_device_id usb_tranzport_table[] = {
{USB_DEVICE(VENDOR_ID, PRODUCT_ID)},
{} /* Terminating entry */
};
diff -u -p a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c
--- a/drivers/staging/frontier/alphatrack.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/frontier/alphatrack.c 2010-01-08 11:03:36.000000000 +0100
@@ -58,7 +58,7 @@
#endif
/* table of devices that work with this driver */
-static struct usb_device_id usb_alphatrack_table[] = {
+static const struct usb_device_id usb_alphatrack_table[] = {
{USB_DEVICE(VENDOR_ID, PRODUCT_ID)},
{} /* Terminating entry */
};
diff -u -p a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
--- a/drivers/staging/asus_oled/asus_oled.c 2009-12-03 04:51:21.000000000 +0100
+++ b/drivers/staging/asus_oled/asus_oled.c 2010-01-08 11:16:13.000000000 +0100
@@ -83,7 +83,7 @@ struct oled_dev_desc_str {
};
/* table of devices that work with this driver */
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
/* Asus G1/G2 (and variants)*/
{ USB_DEVICE(0x0b05, 0x1726) },
/* Asus G50V (and possibly others - G70? G71?)*/
next reply other threads:[~2010-01-09 23:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-09 23:18 Németh Márton [this message]
2010-01-15 1:36 ` patch staging-make-usb-device-id-constant.patch added to gregkh-2.6 tree gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B490ECA.6040108@freemail.hu \
--to=nm127@freemail.hu \
--cc=cocci@diku.dk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=julia@diku.dk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.