From: "Németh Márton" <nm127@freemail.hu>
To: leandro Costantino <lcostantino@gmail.com>
Cc: Jean-Francois Moine <moinejf@free.fr>,
V4L Mailing List <linux-media@vger.kernel.org>
Subject: Re: gspca_sunplus problem: more than one device is created
Date: Sun, 10 Jan 2010 20:42:04 +0100 [thread overview]
Message-ID: <4B4A2D8C.9030801@freemail.hu> (raw)
In-Reply-To: <c2fe070d1001100911o52d989cdm69bda5bff94b37f5@mail.gmail.com>
leandro Costantino wrote:
> Did that happen with the included version on the kernel?.
> The kernel is calling the probe for the isoch and the bulk, i really
> dont have a sunplus webcam to test, and ignore the older behavior,
> that's why i am asking.
I tested with 2.6.33-rc2 on a Clevo D4J model D410J laptop. There only one
device is created. Not counting the circular locking that version is working
properly:
[ 280.578560] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 281.177675] Linux video capture interface: v2.00
[ 281.229464] gspca: main v2.8.0 registered
[ 281.260399] gspca: probing 06d6:0031
[ 281.286724] gspca: video0 created
[ 281.286909] gspca: probing 06d6:0031
[ 281.286914] gspca: intf != 0
[ 281.295106] usbcore: registered new interface driver sunplus
[ 281.295122] sunplus: registered
[ 581.086743]
[ 581.086753] =======================================================
[ 581.086770] [ INFO: possible circular locking dependency detected ]
[ 581.086783] 2.6.33-rc2 #1
[ 581.086790] -------------------------------------------------------
[ 581.086800] svv/3409 is trying to acquire lock:
[ 581.086811] (sysfs_mutex){+.+.+.}, at: [<c03338e3>] sysfs_get_dirent+0x23/0xe0
[ 581.086846]
[ 581.086849] but task is already holding lock:
[ 581.086858] (&gspca_dev->usb_lock){+.+...}, at: [<f80f7019>] gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.086888]
[ 581.086891] which lock already depends on the new lock.
[ 581.086895]
[ 581.086903]
[ 581.086905] the existing dependency chain (in reverse order) is:
[ 581.086915]
[ 581.086917] -> #3 (&gspca_dev->usb_lock){+.+...}:
[ 581.086935] [<c01bd1da>] validate_chain+0x12ea/0x1e40
[ 581.086953] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.086968] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.086982] [<c0649d9a>] mutex_lock_interruptible_nested+0xaa/0xa20
[ 581.087002] [<f80f7019>] gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.087020] [<f80f79ad>] vidioc_streamon+0xfd/0x180 [gspca_main]
[ 581.087037] [<f80e6abc>] __video_do_ioctl+0x29ec/0x71c0 [videodev]
[ 581.087057] [<f80eb36d>] video_ioctl2+0xdd/0x980 [videodev]
[ 581.087074] [<f80e22e7>] v4l2_unlocked_ioctl+0x37/0x70 [videodev]
[ 581.087091] [<c02bd6ed>] vfs_ioctl+0x3d/0x130
[ 581.087109] [<c02bda60>] do_vfs_ioctl+0x80/0xb10
[ 581.087111] [<c02be539>] sys_ioctl+0x49/0xc0
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] -> #2 (&gspca_dev->queue_lock){+.+.+.}:
[ 581.087111] [<c01bd1da>] validate_chain+0x12ea/0x1e40
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c0649d9a>] mutex_lock_interruptible_nested+0xaa/0xa20
[ 581.087111] [<f80fa4ad>] dev_mmap+0x4d/0x3e0 [gspca_main]
[ 581.087111] [<f80e238a>] v4l2_mmap+0x6a/0x80 [videodev]
[ 581.087111] [<c027b234>] mmap_region+0x7a4/0x890
[ 581.087111] [<c027b8aa>] do_mmap_pgoff+0x58a/0x5c0
[ 581.087111] [<c0267296>] sys_mmap_pgoff+0xf6/0x240
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] -> #1 (&mm->mmap_sem){++++++}:
[ 581.087111] [<c01bd1da>] validate_chain+0x12ea/0x1e40
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c026ccef>] might_fault+0xdf/0x120
[ 581.087111] [<c0427670>] copy_to_user+0x60/0x1c0
[ 581.087111] [<c02bf0cf>] filldir64+0x17f/0x210
[ 581.087111] [<c03334b4>] sysfs_readdir+0x174/0x320
[ 581.087111] [<c02bf5fc>] vfs_readdir+0xec/0x130
[ 581.087111] [<c02bf6c7>] sys_getdents64+0x87/0x150
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] -> #0 (sysfs_mutex){+.+.+.}:
[ 581.087111] [<c01bdb3a>] validate_chain+0x1c4a/0x1e40
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c064b210>] mutex_lock_nested+0xa0/0x820
[ 581.087111] [<c03338e3>] sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c0337220>] sysfs_remove_group+0x30/0x220
[ 581.087111] [<c050e5be>] dpm_sysfs_remove+0x1e/0x30
[ 581.087111] [<c0501711>] device_del+0x71/0x310
[ 581.087111] [<c05019c9>] device_unregister+0x19/0x40
[ 581.087111] [<f899d1c1>] usb_remove_ep_devs+0x31/0x50 [usbcore]
[ 581.087111] [<f898fa13>] remove_intf_ep_devs+0x43/0xa0 [usbcore]
[ 581.087111] [<f8991c83>] usb_set_interface+0x1e3/0x430 [usbcore]
[ 581.087111] [<f80f6f33>] get_ep+0x293/0x350 [gspca_main]
[ 581.087111] [<f80f70c8>] gspca_init_transfer+0xd8/0x840 [gspca_main]
[ 581.087111] [<f80f79ad>] vidioc_streamon+0xfd/0x180 [gspca_main]
[ 581.087111] [<f80e6abc>] __video_do_ioctl+0x29ec/0x71c0 [videodev]
[ 581.087111] [<f80eb36d>] video_ioctl2+0xdd/0x980 [videodev]
[ 581.087111] [<f80e22e7>] v4l2_unlocked_ioctl+0x37/0x70 [videodev]
[ 581.087111] [<c02bd6ed>] vfs_ioctl+0x3d/0x130
[ 581.087111] [<c02bda60>] do_vfs_ioctl+0x80/0xb10
[ 581.087111] [<c02be539>] sys_ioctl+0x49/0xc0
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] other info that might help us debug this:
[ 581.087111]
[ 581.087111] 2 locks held by svv/3409:
[ 581.087111] #0: (&gspca_dev->queue_lock){+.+.+.}, at: [<f80f78e7>] vidioc_streamon+0x37/0x180 [gspca_main]
[ 581.087111] #1: (&gspca_dev->usb_lock){+.+...}, at: [<f80f7019>] gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.087111]
[ 581.087111] stack backtrace:
[ 581.087111] Pid: 3409, comm: svv Not tainted 2.6.33-rc2 #1
[ 581.087111] Call Trace:
[ 581.087111] [<c06473f8>] ? printk+0x34/0x54
[ 581.087111] [<c01bb456>] print_circular_bug+0x196/0x1b0
[ 581.087111] [<c01bdb3a>] validate_chain+0x1c4a/0x1e40
[ 581.087111] [<c01b7638>] ? save_trace+0x48/0x150
[ 581.087111] [<c050eab0>] ? device_pm_remove+0x20/0x60
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01be064>] ? __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c03338e3>] ? sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c03338e3>] ? sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c064b210>] mutex_lock_nested+0xa0/0x820
[ 581.087111] [<c03338e3>] ? sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c01b96fb>] ? mark_held_locks+0x9b/0xe0
[ 581.087111] [<c03338e3>] sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c0337220>] sysfs_remove_group+0x30/0x220
[ 581.087111] [<c01b9f37>] ? trace_hardirqs_on+0x27/0x40
[ 581.087111] [<c050e5be>] dpm_sysfs_remove+0x1e/0x30
[ 581.087111] [<c0501711>] device_del+0x71/0x310
[ 581.087111] [<c05019c9>] device_unregister+0x19/0x40
[ 581.087111] [<f899d1c1>] usb_remove_ep_devs+0x31/0x50 [usbcore]
[ 581.087111] [<f898fa13>] remove_intf_ep_devs+0x43/0xa0 [usbcore]
[ 581.087111] [<f8991c83>] usb_set_interface+0x1e3/0x430 [usbcore]
[ 581.087111] [<f80f6f33>] get_ep+0x293/0x350 [gspca_main]
[ 581.087111] [<c064a6be>] ? mutex_lock_interruptible_nested+0x9ce/0xa20
[ 581.087111] [<f80f7019>] ? gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.087111] [<f80f70c8>] gspca_init_transfer+0xd8/0x840 [gspca_main]
[ 581.087111] [<f80f78e7>] ? vidioc_streamon+0x37/0x180 [gspca_main]
[ 581.087111] [<f80f78e7>] ? vidioc_streamon+0x37/0x180 [gspca_main]
[ 581.087111] [<f80f79ad>] vidioc_streamon+0xfd/0x180 [gspca_main]
[ 581.087111] [<f80e6abc>] __video_do_ioctl+0x29ec/0x71c0 [videodev]
[ 581.087111] [<c064ee8f>] ? _raw_spin_unlock_irq+0x8f/0x100
[ 581.087111] [<c01be064>] ? __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf7c0>] ? lock_release_non_nested+0xc0/0x550
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c026cd12>] ? might_fault+0x102/0x120
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c0427491>] ? _copy_from_user+0x51/0x1d0
[ 581.087111] [<f80eb36d>] video_ioctl2+0xdd/0x980 [videodev]
[ 581.087111] [<c0149199>] ? __wake_up+0x29/0x90
[ 581.087111] [<c064f003>] ? _raw_spin_unlock_irqrestore+0x103/0x150
[ 581.087111] [<c01b9e12>] ? trace_hardirqs_on_caller+0x312/0x410
[ 581.087111] [<c01b9f37>] ? trace_hardirqs_on+0x27/0x40
[ 581.087111] [<f80eb290>] ? video_ioctl2+0x0/0x980 [videodev]
[ 581.087111] [<f80e22e7>] v4l2_unlocked_ioctl+0x37/0x70 [videodev]
[ 581.087111] [<f80e22b0>] ? v4l2_unlocked_ioctl+0x0/0x70 [videodev]
[ 581.087111] [<c02bd6ed>] vfs_ioctl+0x3d/0x130
[ 581.087111] [<c01b9f37>] ? trace_hardirqs_on+0x27/0x40
[ 581.087111] [<c02bda60>] do_vfs_ioctl+0x80/0xb10
[ 581.087111] [<c04cde27>] ? tty_write+0x2a7/0x490
[ 581.087111] [<c02a22a7>] ? vfs_write+0x177/0x260
[ 581.087111] [<c010487b>] ? sysenter_exit+0xf/0x16
[ 581.087111] [<c02be539>] sys_ioctl+0x49/0xc0
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
Regards,
Márton Németh
> 2010/1/10 Németh Márton <nm127@freemail.hu>:
>> Hi,
>>
>> I tried the gspca_sunplus driver from http://linuxtv.org/hg/~jfrancois/gspca/
>> rev 13915 on top of Linux kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom
>> device in webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
>> and /dev/video1:
>>
>> [31636.528184] usb 3-2: new full speed USB device using uhci_hcd and address 5
>> [31636.740722] usb 3-2: New USB device found, idVendor=06d6, idProduct=0031
>> [31636.740744] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [31636.740760] usb 3-2: Product: Trust 610 LCD POWERC@M ZOOM
>> [31636.740772] usb 3-2: Manufacturer: Trust
>> [31636.744229] usb 3-2: configuration #1 chosen from 1 choice
>> [31636.747584] gspca: probing 06d6:0031
>> [31636.760176] gspca: video0 created
>> [31636.760643] gspca: probing 06d6:0031
>> [31636.772063] gspca: video1 created
>>
>> The /dev/video0 is working correctly but the /dev/video1 just causes error:
>> $ ./svv -d /dev/video1
>> raw pixfmt: JPEG 464x480
>> pixfmt: RGB3 464x480
>> mmap method
>> VIDIOC_STREAMON error 5, Input/output error
>>
>> Here is the USB descriptor of the device:
>>
>> Trust 610 LCD POWERC@M ZOOM
>> Manufacturer: Trust
>> Speed: 12Mb/s (full)
>> USB Version: 1.00
>> Device Class: 00(>ifc )
>> Device Subclass: 00
>> Device Protocol: 00
>> Maximum Default Endpoint Size: 8
>> Number of Configurations: 1
>> Vendor Id: 06d6
>> Product Id: 0031
>> Revision Number: 1.00
>>
>> Config Number: 1
>> Number of Interfaces: 2
>> Attributes: 80
>> MaxPower Needed: 500mA
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 0
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 0
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 1
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 128
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 2
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 384
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 3
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 512
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 4
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 640
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 5
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 768
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 6
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 896
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 7
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 1023
>> Interval: 1ms
>>
>> Interface Number: 1
>> Name: sunplus
>> Alternate Number: 0
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 3
>>
>> Endpoint Address: 82
>> Direction: in
>> Attribute: 2
>> Type: Bulk
>> Max Packet Size: 64
>> Interval: 0ms
>>
>> Endpoint Address: 03
>> Direction: out
>> Attribute: 2
>> Type: Bulk
>> Max Packet Size: 64
>> Interval: 0ms
>>
>> Endpoint Address: 84
>> Direction: in
>> Attribute: 3
>> Type: Int.
>> Max Packet Size: 1
>> Interval: 1ms
>>
>> Regards,
>>
>> Márton Németh
next prev parent reply other threads:[~2010-01-10 19:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-10 16:38 gspca_sunplus problem: more than one device is created Németh Márton
2010-01-10 17:11 ` leandro Costantino
2010-01-10 19:42 ` Németh Márton [this message]
2010-01-10 19:35 ` Jean-Francois Moine
2010-01-10 20:47 ` Németh Márton
2010-01-11 0:22 ` Hans de Goede
2010-01-11 18:19 ` Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B4A2D8C.9030801@freemail.hu \
--to=nm127@freemail.hu \
--cc=lcostantino@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=moinejf@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.