[PATCH] ep93xx: use pr_fmt in clock.c

[ryan@bluewatersys.com (Ryan Mallon)]

H Hartley Sweeten wrote:
> Use pr_fmt to prefix kernel output with the module name and change
> all printk messages to pr_<level> format.
> 
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Ryan Mallon <ryan@bluewatersys.com>
> 
> ---
> 
> diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
> index 1d0f9d8..07a58d0 100644
> --- a/arch/arm/mach-ep93xx/clock.c
> +++ b/arch/arm/mach-ep93xx/clock.c
> @@ -10,6 +10,8 @@
>   * your option) any later version.
>   */
>  
> +#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
> +
>  #include <linux/kernel.h>
>  #include <linux/clk.h>
>  #include <linux/err.h>
> @@ -468,9 +470,9 @@ static int __init ep93xx_clock_init(void)
>  	}
>  	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
>  
> -	printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
> +	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
>  		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
> -	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
> +	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
>  		clk_f.rate / 1000000, clk_h.rate / 1000000,
>  		clk_p.rate / 1000000);
>   

Acked-by: Ryan Mallon <ryan@bluewatersys.com>

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934