From mboxrd@z Thu Jan 1 00:00:00 1970 From: ryan@bluewatersys.com (Ryan Mallon) Date: Mon, 11 Jan 2010 14:06:31 +1300 Subject: [PATCH] ep93xx: use pr_fmt in core.c In-Reply-To: References: Message-ID: <4B4A7997.2030002@bluewatersys.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org H Hartley Sweeten wrote: > Use pr_fmt to prefix kernel output with the module name. > > Signed-off-by: H Hartley Sweeten > Cc: Ryan Mallon > > --- > > diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c > index 1f0d665..41064bd 100644 > --- a/arch/arm/mach-ep93xx/core.c > +++ b/arch/arm/mach-ep93xx/core.c > @@ -14,6 +14,8 @@ > * your option) any later version. > */ > > +#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt > + > #include > #include > #include > @@ -318,8 +320,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) > desc->handle_irq = handle_edge_irq; > break; > default: > - pr_err("ep93xx: failed to set irq type %d for gpio %d\n", > - type, gpio); > + pr_err("failed to set irq type %d for gpio %d\n", type, gpio); > return -EINVAL; > } > > @@ -572,9 +573,9 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, > * CMOS driver. > */ > if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) > - pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n"); > + pr_warning("sda != EEDAT, open drain has no effect\n"); > if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) > - pr_warning("ep93xx: scl != EECLK, open drain has no effect\n"); > + pr_warning("scl != EECLK, open drain has no effect\n"); > > __raw_writel((data->sda_is_open_drain << 1) | > (data->scl_is_open_drain << 0), Acked-by: Ryan Mallon -- Bluewater Systems Ltd - ARM Technology Solution Centre Ryan Mallon 5 Amuri Park, 404 Barbadoes St ryan at bluewatersys.com PO Box 13 889, Christchurch 8013 http://www.bluewatersys.com New Zealand Phone: +64 3 3779127 Freecall: Australia 1800 148 751 Fax: +64 3 3779135 USA 1800 261 2934