From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <4B4CFAF1.80204@domain.hid>
Date: Tue, 12 Jan 2010 23:42:57 +0100
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <001101ca930a$1052fa70$30f8ef50$@kalatchev@domain.hid>	<4B4BADDD.7070900@domain.hid>	<001f01ca9390$5fa20db0$1ee62910$@kalatchev@domain.hid>	<4B4C84AC.3020207@domain.hid>	<002001ca9399$99b07c40$cd1174c0$@kalatchev@domain.hid>	<4B4C96D5.7060902@domain.hid>	<002101ca93a1$a39d4050$ead7c0f0$@kalatchev@domain.hid>	<4B4CA076.1050205@domain.hid>	<002501ca93ae$2b168850$814398f0$@kalatchev@domain.hid>	<4B4CD5E8.7040904@domain.hid>
	<004301ca93d8$4f6ca660$ee45f320$@kalatchev@domain.hid>
In-Reply-To: <004301ca93d8$4f6ca660$ee45f320$@kalatchev@domain.hid>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] Viper board (ARM XScale)
	problems	with	Xenomai-2.4.10
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Ivan Kalatchev <ivan.kalatchev@domain.hid>
Cc: 'Xenomai help' <xenomai@xenomai.org>

Ivan Kalatchev wrote:
>>>> Ok, you need to change the other #ifdef a bit further.
>>> When I added __GNUC__ >= 4 to both #if __LINUX_ARM_ARCH__ in 
>>> asm-arm/arith.h, I again received compiler error for some reason.
>>> 
> 
> Looks like my compiler stumbles at __rthal_add96and64 as well, that's
> why I can't compile it.

Could you show me the error messages? The assembly sequence is pretty
simple.

-- 
Gilles Chanteperdrix, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com