* [PATCH 1/3] mac80211: force use_short_slot=true for 5GHz
@ 2010-01-15 1:27 Felix Fietkau
2010-01-15 1:33 ` [PATCH 2/3] ath9k: cleanup slot time and ack/cts timeout handling Felix Fietkau
2010-01-15 2:00 ` [PATCH v2 1/3] mac80211: force use_short_slot=true for 5GHz Felix Fietkau
0 siblings, 2 replies; 4+ messages in thread
From: Felix Fietkau @ 2010-01-15 1:27 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg, John W. Linville
Normally 5GHz does not have a concept of long vs short slot time,
however the slot time that it ends up using is the same as for 2.4 GHZ
and use_short_slot == true
Because of that, it makes more sense to force use_short_slot = true
whenever 5 GHz is being used, so that this particular check does not
have to be in every single driver that uses this flag.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -670,6 +670,8 @@ static u32 ieee80211_handle_bss_capabili
}
use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
+ if (sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
+ use_short_slot = true;
if (use_protection != bss_conf->use_cts_prot) {
bss_conf->use_cts_prot = use_protection;
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/3] ath9k: cleanup slot time and ack/cts timeout handling
2010-01-15 1:27 [PATCH 1/3] mac80211: force use_short_slot=true for 5GHz Felix Fietkau
@ 2010-01-15 1:33 ` Felix Fietkau
2010-01-15 1:34 ` [PATCH 3/3] ath9k: implement coverage class support Felix Fietkau
2010-01-15 2:00 ` [PATCH v2 1/3] mac80211: force use_short_slot=true for 5GHz Felix Fietkau
1 sibling, 1 reply; 4+ messages in thread
From: Felix Fietkau @ 2010-01-15 1:33 UTC (permalink / raw)
To: linux-wireless; +Cc: Luis R. Rodriguez, John W. Linville
Previously ath9k left the initialization of slot timing and ACK/CTS
timeout to the mode specific initvals. This does not handle short vs
long slot in 2.4 GHz and uses a rather strange value for the 2.4 GHz
ACK timeout (64 usec).
This patch uses the proper ath9k_hw functions for setting slot time and
timeouts and also implements the switch between short and long slot
time in 2.4 GHz
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1790,6 +1790,7 @@ static void ath9k_bss_info_changed(struc
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
+ int slottime;
int error;
mutex_lock(&sc->mutex);
@@ -1825,6 +1826,25 @@ static void ath9k_bss_info_changed(struc
ath_beacon_config(sc, vif);
}
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (bss_conf->use_short_slot)
+ slottime = 9;
+ else
+ slottime = 20;
+ if (vif->type == NL80211_IFTYPE_AP) {
+ /*
+ * Defer update, so that connected stations can adjust
+ * their settings at the same time.
+ * See beacon.c for more details
+ */
+ sc->beacon.slottime = slottime;
+ sc->beacon.updateslot = UPDATE;
+ } else {
+ ah->slottime = slottime;
+ ath9k_hw_init_global_settings(ah);
+ }
+ }
+
/* Disable transmission of beacons */
if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -55,28 +55,6 @@ module_exit(ath9k_exit);
/* Helper Functions */
/********************/
-static u32 ath9k_hw_mac_usec(struct ath_hw *ah, u32 clks)
-{
- struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
-
- if (!ah->curchan) /* should really check for CCK instead */
- return clks / ATH9K_CLOCK_RATE_CCK;
- if (conf->channel->band == IEEE80211_BAND_2GHZ)
- return clks / ATH9K_CLOCK_RATE_2GHZ_OFDM;
-
- return clks / ATH9K_CLOCK_RATE_5GHZ_OFDM;
-}
-
-static u32 ath9k_hw_mac_to_usec(struct ath_hw *ah, u32 clks)
-{
- struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
-
- if (conf_is_ht40(conf))
- return ath9k_hw_mac_usec(ah, clks) / 2;
- else
- return ath9k_hw_mac_usec(ah, clks);
-}
-
static u32 ath9k_hw_mac_clks(struct ath_hw *ah, u32 usecs)
{
struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
@@ -413,8 +391,6 @@ static void ath9k_hw_init_defaults(struc
ah->beacon_interval = 100;
ah->enable_32kHz_clock = DONT_USE_32KHZ;
ah->slottime = (u32) -1;
- ah->acktimeout = (u32) -1;
- ah->ctstimeout = (u32) -1;
ah->globaltxtimeout = (u32) -1;
ah->power_mode = ATH9K_PM_UNDEFINED;
}
@@ -1196,34 +1172,25 @@ static void ath9k_hw_init_interrupt_mask
}
}
-static bool ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
+static void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
{
- if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
- ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
- "bad ack timeout %u\n", us);
- ah->acktimeout = (u32) -1;
- return false;
- } else {
- REG_RMW_FIELD(ah, AR_TIME_OUT,
- AR_TIME_OUT_ACK, ath9k_hw_mac_to_clks(ah, us));
- ah->acktimeout = us;
- return true;
- }
+ u32 val = ath9k_hw_mac_to_clks(ah, us);
+ val = min(val, (u32) 0xFFFF);
+ REG_WRITE(ah, AR_D_GBL_IFS_SLOT, val);
}
-static bool ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+static void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
{
- if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
- ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
- "bad cts timeout %u\n", us);
- ah->ctstimeout = (u32) -1;
- return false;
- } else {
- REG_RMW_FIELD(ah, AR_TIME_OUT,
- AR_TIME_OUT_CTS, ath9k_hw_mac_to_clks(ah, us));
- ah->ctstimeout = us;
- return true;
- }
+ u32 val = ath9k_hw_mac_to_clks(ah, us);
+ val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_ACK));
+ REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_ACK, val);
+}
+
+static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+{
+ u32 val = ath9k_hw_mac_to_clks(ah, us);
+ val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_CTS));
+ REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_CTS, val);
}
static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
@@ -1240,23 +1207,32 @@ static bool ath9k_hw_set_global_txtimeou
}
}
-static void ath9k_hw_init_user_settings(struct ath_hw *ah)
+void ath9k_hw_init_global_settings(struct ath_hw *ah)
{
+ struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
+ int acktimeout;
+ int sifstime;
+
ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
ah->misc_mode);
if (ah->misc_mode != 0)
REG_WRITE(ah, AR_PCU_MISC,
REG_READ(ah, AR_PCU_MISC) | ah->misc_mode);
- if (ah->slottime != (u32) -1)
- ath9k_hw_setslottime(ah, ah->slottime);
- if (ah->acktimeout != (u32) -1)
- ath9k_hw_set_ack_timeout(ah, ah->acktimeout);
- if (ah->ctstimeout != (u32) -1)
- ath9k_hw_set_cts_timeout(ah, ah->ctstimeout);
+
+ if (conf->channel && conf->channel->band == IEEE80211_BAND_5GHZ)
+ sifstime = 16;
+ else
+ sifstime = 10;
+
+ acktimeout = ah->slottime + sifstime;
+ ath9k_hw_setslottime(ah, ah->slottime);
+ ath9k_hw_set_ack_timeout(ah, acktimeout);
+ ath9k_hw_set_cts_timeout(ah, acktimeout);
if (ah->globaltxtimeout != (u32) -1)
ath9k_hw_set_global_txtimeout(ah, ah->globaltxtimeout);
}
+EXPORT_SYMBOL(ath9k_hw_init_global_settings);
void ath9k_hw_deinit(struct ath_hw *ah)
{
@@ -2077,7 +2053,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
ath9k_enable_rfkill(ah);
- ath9k_hw_init_user_settings(ah);
+ ath9k_hw_init_global_settings(ah);
if (AR_SREV_9287_12_OR_LATER(ah)) {
REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
@@ -3674,21 +3650,6 @@ u64 ath9k_hw_extend_tsf(struct ath_hw *a
}
EXPORT_SYMBOL(ath9k_hw_extend_tsf);
-bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
-{
- if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) {
- ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
- "bad slot time %u\n", us);
- ah->slottime = (u32) -1;
- return false;
- } else {
- REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath9k_hw_mac_to_clks(ah, us));
- ah->slottime = us;
- return true;
- }
-}
-EXPORT_SYMBOL(ath9k_hw_setslottime);
-
void ath9k_hw_set11nmac2040(struct ath_hw *ah)
{
struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -553,8 +553,6 @@ struct ath_hw {
int16_t txpower_indexoffset;
u32 beacon_interval;
u32 slottime;
- u32 acktimeout;
- u32 ctstimeout;
u32 globaltxtimeout;
/* ANI */
@@ -668,7 +666,7 @@ void ath9k_hw_settsf64(struct ath_hw *ah
void ath9k_hw_reset_tsf(struct ath_hw *ah);
void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp);
-bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
+void ath9k_hw_init_global_settings(struct ath_hw *ah);
void ath9k_hw_set11nmac2040(struct ath_hw *ah);
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -480,7 +480,8 @@ void ath_beacon_tasklet(unsigned long da
sc->beacon.updateslot = COMMIT; /* commit next beacon */
sc->beacon.slotupdate = slot;
} else if (sc->beacon.updateslot == COMMIT && sc->beacon.slotupdate == slot) {
- ath9k_hw_setslottime(sc->sc_ah, sc->beacon.slottime);
+ ah->slottime = sc->beacon.slottime;
+ ath9k_hw_init_global_settings(ah);
sc->beacon.updateslot = OK;
}
if (bfaddr != 0) {
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 3/3] ath9k: implement coverage class support
2010-01-15 1:33 ` [PATCH 2/3] ath9k: cleanup slot time and ack/cts timeout handling Felix Fietkau
@ 2010-01-15 1:34 ` Felix Fietkau
0 siblings, 0 replies; 4+ messages in thread
From: Felix Fietkau @ 2010-01-15 1:34 UTC (permalink / raw)
To: linux-wireless; +Cc: Luis R. Rodriguez, John W. Linville
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1211,6 +1211,7 @@ void ath9k_hw_init_global_settings(struc
{
struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
int acktimeout;
+ int slottime;
int sifstime;
ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
@@ -1225,8 +1226,10 @@ void ath9k_hw_init_global_settings(struc
else
sifstime = 10;
- acktimeout = ah->slottime + sifstime;
- ath9k_hw_setslottime(ah, ah->slottime);
+ /* As defined by IEEE 802.11-2007 17.3.8.6 */
+ slottime = ah->slottime + 3 * ah->coverage_class;
+ acktimeout = slottime + sifstime;
+ ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
ath9k_hw_set_cts_timeout(ah, acktimeout);
if (ah->globaltxtimeout != (u32) -1)
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -551,6 +551,7 @@ struct ath_hw {
u32 *bank6Temp;
int16_t txpower_indexoffset;
+ int coverage_class;
u32 beacon_interval;
u32 slottime;
u32 globaltxtimeout;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2015,6 +2015,18 @@ static void ath9k_sw_scan_complete(struc
mutex_unlock(&sc->mutex);
}
+static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8
coverage_class)
+{
+ struct ath_wiphy *aphy = hw->priv;
+ struct ath_softc *sc = aphy->sc;
+ struct ath_hw *ah = sc->sc_ah;
+
+ mutex_lock(&sc->mutex);
+ ah->coverage_class = coverage_class;
+ ath9k_hw_init_global_settings(ah);
+ mutex_unlock(&sc->mutex);
+}
+
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
@@ -2034,4 +2046,5 @@ struct ieee80211_ops ath9k_ops = {
.sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete,
.rfkill_poll = ath9k_rfkill_poll_state,
+ .set_coverage_class = ath9k_set_coverage_class,
};
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/3] mac80211: force use_short_slot=true for 5GHz
2010-01-15 1:27 [PATCH 1/3] mac80211: force use_short_slot=true for 5GHz Felix Fietkau
2010-01-15 1:33 ` [PATCH 2/3] ath9k: cleanup slot time and ack/cts timeout handling Felix Fietkau
@ 2010-01-15 2:00 ` Felix Fietkau
1 sibling, 0 replies; 4+ messages in thread
From: Felix Fietkau @ 2010-01-15 2:00 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg, John W. Linville
Normally 5GHz does not have a concept of long vs short slot time,
however the slot time that it ends up using is the same as for 2.4 GHZ
and use_short_slot == true
Because of that, it makes more sense to force use_short_slot = true
whenever 5 GHz is being used, so that this particular check does not
have to be in every single driver that uses this flag.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
v2: sorry, forgot one chunk of the patch
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -670,6 +670,8 @@ static u32 ieee80211_handle_bss_capabili
}
use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
+ if (sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
+ use_short_slot = true;
if (use_protection != bss_conf->use_cts_prot) {
bss_conf->use_cts_prot = use_protection;
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1087,6 +1087,13 @@ static int ieee80211_change_bss(struct w
params->use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
+
+ if (!sdata->vif.bss_conf.use_short_slot &&
+ sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) {
+ sdata->vif.bss_conf.use_short_slot = true;
+ changed |= BSS_CHANGED_ERP_SLOT;
+ }
+
if (params->use_short_slot_time >= 0) {
sdata->vif.bss_conf.use_short_slot =
params->use_short_slot_time;
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-01-15 2:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-15 1:27 [PATCH 1/3] mac80211: force use_short_slot=true for 5GHz Felix Fietkau
2010-01-15 1:33 ` [PATCH 2/3] ath9k: cleanup slot time and ack/cts timeout handling Felix Fietkau
2010-01-15 1:34 ` [PATCH 3/3] ath9k: implement coverage class support Felix Fietkau
2010-01-15 2:00 ` [PATCH v2 1/3] mac80211: force use_short_slot=true for 5GHz Felix Fietkau
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.