From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver
Date: Fri, 15 Jan 2010 17:48:45 -0600 [thread overview]
Message-ID: <4B50FEDD.7000003@freescale.com> (raw)
In-Reply-To: <4b73d43f1001151530r2329b2e4pa3ae82071a3dd33f@mail.gmail.com>
John Rigby wrote:
> No I have not tested on mx27. I don't have any hw. If someone could
> test it that would be great. Also I really don't know if the syndrome
> stuff is needed.
I was just about to comment on that. :-)
At a first glance it looks like you'll need either some custom read/write page,
or complicated read_buf/write_buf -- but I'm not sure that all of the stuff
being done in the syndrome functions is needed (or even that the syndrome
functions are a good starting point), and this driver already has complicated
read/write_buf that could probably be tweaked to work with this chip.
> This is a straight port from KARO's linux driver
> (not mainline) that I know works on mx25. If someone can verify that
> it works on mx27 and/or mx31 I would like to get it accepted as is
> (with fixes above). After it is in I will go back and try to clean it
> up some more.
OK.
-Scott
next prev parent reply other threads:[~2010-01-15 23:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-13 4:43 [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 1/9] mxc_serial replace platform specific clock John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 2/9] arm926ejs: add nand_spl boot support John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 5/9] fec_mxc: cleanup and factor out imx27 dependencies John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 6/9] Add support for Freescale MX25 SOC John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 7/9] fec_mxc: add imx25 support John Rigby
2010-01-13 4:44 ` [U-Boot] [PATCH 8/9] env_nand.c: print error message and fail gracefully John Rigby
2010-01-13 4:44 ` [U-Boot] [PATCH 9/9] Add support for KARO TX25 board John Rigby
2010-01-13 15:26 ` Fabio Estevam
2010-01-15 15:20 ` Wolfgang Denk
2010-01-15 22:28 ` [U-Boot] [PATCH 8/9] env_nand.c: print error message and fail gracefully Scott Wood
2010-01-13 15:10 ` [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support Fabio Estevam
2010-01-13 16:50 ` John Rigby
2010-01-15 0:48 ` Fabio Estevam
2010-01-15 16:49 ` John Rigby
2010-01-15 22:36 ` Scott Wood
2010-01-15 23:32 ` John Rigby
2010-01-13 15:15 ` [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver Fabio Estevam
2010-01-15 23:13 ` Scott Wood
2010-01-15 23:30 ` John Rigby
2010-01-15 23:48 ` Scott Wood [this message]
2010-01-15 15:09 ` [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board Wolfgang Denk
2010-01-15 15:14 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B50FEDD.7000003@freescale.com \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.