* Samsung SoC device updates (rev2)
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
Updated series to include the s3c24xx_mci_set_platdata() call.
Current branch next-samsung-devupdates1
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH] ARM: S3C: Rename s3c_device_usb to s3c_device_ohci
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
Prepare for the forthcoming device changes by renaming s3c_device_usb to
s3c_device_ohci as this is what the device represents.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +-
arch/arm/mach-s3c2410/mach-bast.c | 2 +-
arch/arm/mach-s3c2410/mach-h1940.c | 2 +-
arch/arm/mach-s3c2410/mach-n30.c | 2 +-
arch/arm/mach-s3c2410/mach-otom.c | 2 +-
arch/arm/mach-s3c2410/mach-qt2410.c | 2 +-
arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +-
arch/arm/mach-s3c2410/mach-tct_hammer.c | 2 +-
arch/arm/mach-s3c2410/mach-vr1000.c | 2 +-
arch/arm/mach-s3c2410/usb-simtec.c | 2 +-
arch/arm/mach-s3c2412/mach-jive.c | 2 +-
arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +-
arch/arm/mach-s3c2412/mach-vstms.c | 2 +-
arch/arm/mach-s3c2440/mach-anubis.c | 2 +-
arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c2440/mach-mini2440.c | 2 +-
arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c2440/mach-rx3715.c | 2 +-
arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +-
arch/arm/mach-s3c2442/mach-gta02.c | 4 ++--
arch/arm/mach-s3c6410/mach-hmt.c | 2 +-
arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +-
arch/arm/plat-s3c/include/plat/devs.h | 2 +-
arch/arm/plat-samsung/dev-usb.c | 4 ++--
24 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84ad..7047317 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fd..02b1b62 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe..3f9217d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = {
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_ts,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712..684710f 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_usbgadget,
&n30_button_device,
&n30_blue_led,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261..d8c7f2e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = {
/* Standard OTOM devices */
static struct platform_device *otom11_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bc..92a4ec3 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = {
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126c..4522230 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
};
static struct platform_device *smdk2410_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb043..929164a 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb5..9051f0d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d8..199bb4f 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
- s3c_device_usb.dev.platform_data = &usb_simtec_info;
+ s3c_device_ohci.dev.platform_data = &usb_simtec_info;
return 0;
}
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fc..14f4798 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = {
/* The platform devices being used. */
static struct platform_device *jive_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e434..437c087 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -104,7 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
static struct platform_device *smdk2413_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
//&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591..3ca9265 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
};
static struct platform_device *vstms_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3e..b73f78a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = {
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290..0defde6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
};
static struct platform_device *at2440evb_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e90..347eb6d 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -506,7 +506,7 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
};
static struct platform_device *mini2440_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43eded..86a243b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -106,7 +106,7 @@ static struct platform_device nexcoder_device_nor = {
/* Standard Nexcoder devices */
static struct platform_device *nexcoder_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13..1e836e5 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
};
static struct platform_device *rx3715_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e74..df3e9a3 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
};
static struct platform_device *smdk2440_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0b4a3a0..825800b 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -565,7 +565,7 @@ static void __init gta02_map_io(void)
/* These are the guys that don't need to be children of PMU. */
static struct platform_device *gta02_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_sdi,
&s3c_device_usbgadget,
@@ -623,7 +623,7 @@ static void __init gta02_machine_init(void)
INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
#endif
- s3c_device_usb.dev.platform_data = >a02_usb_info;
+ s3c_device_ohci.dev.platform_data = >a02_usb_info;
s3c24xx_udc_set_platdata(>a02_udc_cfg);
s3c_nand_set_platdata(>a02_nand_info);
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index cdd4b53..284886c 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -233,7 +233,7 @@ static struct platform_device *hmt_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_nand,
&s3c_device_fb,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_timer[1],
&hmt_backlight_device,
&hmt_leds_device,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 8969fe7..e2811fc 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -235,7 +235,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_usb_hsotg,
#ifdef CONFIG_REGULATOR
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 8a4153b..543a351 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,7 +34,7 @@ extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 2ee85ab..431ae5d 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -36,7 +36,7 @@ static struct resource s3c_usb_resource[] = {
static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-struct platform_device s3c_device_usb = {
+struct platform_device s3c_device_ohci = {
.name = "s3c2410-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_resource),
@@ -47,4 +47,4 @@ struct platform_device s3c_device_usb = {
}
};
-EXPORT_SYMBOL(s3c_device_usb);
+EXPORT_SYMBOL(s3c_device_ohci);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH] ARM: S3C: Rename s3c_device_usb to s3c_device_ohci
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
Prepare for the forthcoming device changes by renaming s3c_device_usb to
s3c_device_ohci as this is what the device represents.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +-
arch/arm/mach-s3c2410/mach-bast.c | 2 +-
arch/arm/mach-s3c2410/mach-h1940.c | 2 +-
arch/arm/mach-s3c2410/mach-n30.c | 2 +-
arch/arm/mach-s3c2410/mach-otom.c | 2 +-
arch/arm/mach-s3c2410/mach-qt2410.c | 2 +-
arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +-
arch/arm/mach-s3c2410/mach-tct_hammer.c | 2 +-
arch/arm/mach-s3c2410/mach-vr1000.c | 2 +-
arch/arm/mach-s3c2410/usb-simtec.c | 2 +-
arch/arm/mach-s3c2412/mach-jive.c | 2 +-
arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +-
arch/arm/mach-s3c2412/mach-vstms.c | 2 +-
arch/arm/mach-s3c2440/mach-anubis.c | 2 +-
arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c2440/mach-mini2440.c | 2 +-
arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c2440/mach-rx3715.c | 2 +-
arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +-
arch/arm/mach-s3c2442/mach-gta02.c | 4 ++--
arch/arm/mach-s3c6410/mach-hmt.c | 2 +-
arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +-
arch/arm/plat-s3c/include/plat/devs.h | 2 +-
arch/arm/plat-samsung/dev-usb.c | 4 ++--
24 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84ad..7047317 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fd..02b1b62 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe..3f9217d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = {
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_ts,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712..684710f 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_usbgadget,
&n30_button_device,
&n30_blue_led,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261..d8c7f2e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = {
/* Standard OTOM devices */
static struct platform_device *otom11_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bc..92a4ec3 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = {
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126c..4522230 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
};
static struct platform_device *smdk2410_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb043..929164a 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb5..9051f0d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d8..199bb4f 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
- s3c_device_usb.dev.platform_data = &usb_simtec_info;
+ s3c_device_ohci.dev.platform_data = &usb_simtec_info;
return 0;
}
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fc..14f4798 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = {
/* The platform devices being used. */
static struct platform_device *jive_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e434..437c087 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -104,7 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
static struct platform_device *smdk2413_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
//&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591..3ca9265 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
};
static struct platform_device *vstms_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3e..b73f78a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = {
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290..0defde6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
};
static struct platform_device *at2440evb_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e90..347eb6d 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -506,7 +506,7 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
};
static struct platform_device *mini2440_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43eded..86a243b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -106,7 +106,7 @@ static struct platform_device nexcoder_device_nor = {
/* Standard Nexcoder devices */
static struct platform_device *nexcoder_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13..1e836e5 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
};
static struct platform_device *rx3715_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e74..df3e9a3 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
};
static struct platform_device *smdk2440_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0b4a3a0..825800b 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -565,7 +565,7 @@ static void __init gta02_map_io(void)
/* These are the guys that don't need to be children of PMU. */
static struct platform_device *gta02_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_sdi,
&s3c_device_usbgadget,
@@ -623,7 +623,7 @@ static void __init gta02_machine_init(void)
INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
#endif
- s3c_device_usb.dev.platform_data = >a02_usb_info;
+ s3c_device_ohci.dev.platform_data = >a02_usb_info;
s3c24xx_udc_set_platdata(>a02_udc_cfg);
s3c_nand_set_platdata(>a02_nand_info);
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index cdd4b53..284886c 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -233,7 +233,7 @@ static struct platform_device *hmt_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_nand,
&s3c_device_fb,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_timer[1],
&hmt_backlight_device,
&hmt_leds_device,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 8969fe7..e2811fc 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -235,7 +235,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_usb_hsotg,
#ifdef CONFIG_REGULATOR
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 8a4153b..543a351 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,7 +34,7 @@ extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 2ee85ab..431ae5d 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -36,7 +36,7 @@ static struct resource s3c_usb_resource[] = {
static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-struct platform_device s3c_device_usb = {
+struct platform_device s3c_device_ohci = {
.name = "s3c2410-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_resource),
@@ -47,4 +47,4 @@ struct platform_device s3c_device_usb = {
}
};
-EXPORT_SYMBOL(s3c_device_usb);
+EXPORT_SYMBOL(s3c_device_ohci);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH] ARM: S3C2412: Fixup commented out device in SMDK2413
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
The SMDK2413 has a commented out device that does not have any setup
data for it, so remove it for now.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2412/mach-smdk2413.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 437c087..0392065 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -105,7 +105,6 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_ohci,
- //&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH] ARM: S3C2412: Fixup commented out device in SMDK2413
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
The SMDK2413 has a commented out device that does not have any setup
data for it, so remove it for now.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2412/mach-smdk2413.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 437c087..0392065 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -105,7 +105,6 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_ohci,
- //&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
Start Documentation/arm/Samsung and add an initial overview file
which whilst is not complete, is better than nothing.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
Documentation/arm/Samsung/Overview.txt | 63 ++++++++++++++++++++++++++++++++
1 files changed, 63 insertions(+), 0 deletions(-)
create mode 100644 Documentation/arm/Samsung/Overview.txt
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 0000000..c3d2f44
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,63 @@
+ Samsung ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The Samsung range of ARM SoCs spans many similar devices, from the initial
+ ARM9 through to the newest ARM cores. This document shows an overview of
+ the current kernel support, how to use it and where to find the code
+ that supports this.
+
+ The currently supported SoCs are:
+
+ - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+ - S3C64XX: S3C6400 and S3C6410
+
+ S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+ There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
+ deals with the architecture and drivers specific to these devices.
+
+ See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+ on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+ A number of configurations are supplied, as there is no current way of
+ unifying all the SoCs into one kernel.
+
+ [ to finish ]
+
+Layout
+------
+
+ [ to finish ]
+
+
+Port Contributors
+-----------------
+
+ Ben Dooks (BJD)
+ Vincent Sanders
+ Herbert Potzl
+ Arnaud Patard (RTP)
+ Roc Wu
+ Klaus Fetscher
+ Dimitry Andric
+ Shannon Holland
+ Guillaume Gourat (NexVision)
+ Christer Weinigel (wingel) (Acer N30)
+ Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009 Ben Dooks <ben-linux@fluff.org>
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
Start Documentation/arm/Samsung and add an initial overview file
which whilst is not complete, is better than nothing.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
Documentation/arm/Samsung/Overview.txt | 63 ++++++++++++++++++++++++++++++++
1 files changed, 63 insertions(+), 0 deletions(-)
create mode 100644 Documentation/arm/Samsung/Overview.txt
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 0000000..c3d2f44
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,63 @@
+ Samsung ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The Samsung range of ARM SoCs spans many similar devices, from the initial
+ ARM9 through to the newest ARM cores. This document shows an overview of
+ the current kernel support, how to use it and where to find the code
+ that supports this.
+
+ The currently supported SoCs are:
+
+ - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+ - S3C64XX: S3C6400 and S3C6410
+
+ S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+ There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
+ deals with the architecture and drivers specific to these devices.
+
+ See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+ on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+ A number of configurations are supplied, as there is no current way of
+ unifying all the SoCs into one kernel.
+
+ [ to finish ]
+
+Layout
+------
+
+ [ to finish ]
+
+
+Port Contributors
+-----------------
+
+ Ben Dooks (BJD)
+ Vincent Sanders
+ Herbert Potzl
+ Arnaud Patard (RTP)
+ Roc Wu
+ Klaus Fetscher
+ Dimitry Andric
+ Shannon Holland
+ Guillaume Gourat (NexVision)
+ Christer Weinigel (wingel) (Acer N30)
+ Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009 Ben Dooks <ben-linux@fluff.org>
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 11:13 ` Maurus Cuelenaere
-1 siblings, 0 replies; 26+ messages in thread
From: Maurus Cuelenaere @ 2010-01-18 11:13 UTC (permalink / raw)
To: Ben Dooks; +Cc: linux-samsung-soc, linux-arm-kernel
Op 18-01-10 09:45, Ben Dooks schreef:
> Start Documentation/arm/Samsung and add an initial overview file
> which whilst is not complete, is better than nothing.
>
> Signed-off-by: Ben Dooks<ben-linux@fluff.org>
> ---
> Documentation/arm/Samsung/Overview.txt | 63 ++++++++++++++++++++++++++++++++
> 1 files changed, 63 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/arm/Samsung/Overview.txt
>
> diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
> new file mode 100644
> index 0000000..c3d2f44
> --- /dev/null
> +++ b/Documentation/arm/Samsung/Overview.txt
> @@ -0,0 +1,63 @@
> + Samsung ARM Linux Overview
> + ==========================
> +
> +Introduction
> +------------
> +
> + The Samsung range of ARM SoCs spans many similar devices, from the initial
> + ARM9 through to the newest ARM cores. This document shows an overview of
> + the current kernel support, how to use it and where to find the code
> + that supports this.
> +
> + The currently supported SoCs are:
> +
> + - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
> + - S3C64XX: S3C6400 and S3C6410
> +
> + S5PC100 and S5PC110 support is currently being merged
> +
> +
> +S3C24XX Systems
> +---------------
> +
> + There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
>
Same typo as before? Docuemntation -> Documentation
> + deals with the architecture and drivers specific to these devices.
> +
> + See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
> + on the implementation details and specific support.
> +
> +
> +Configuration
> +-------------
> +
> + A number of configurations are supplied, as there is no current way of
> + unifying all the SoCs into one kernel.
> +
> + [ to finish ]
> +
> +Layout
> +------
> +
> + [ to finish ]
> +
> +
> +Port Contributors
> +-----------------
> +
> + Ben Dooks (BJD)
> + Vincent Sanders
> + Herbert Potzl
> + Arnaud Patard (RTP)
> + Roc Wu
> + Klaus Fetscher
> + Dimitry Andric
> + Shannon Holland
> + Guillaume Gourat (NexVision)
> + Christer Weinigel (wingel) (Acer N30)
> + Lucas Correia Villa Real (S3C2400 port)
> +
> +
> +Document Author
> +---------------
> +
> +Copyright 2009 Ben Dooks<ben-linux@fluff.org>
>
Regards,
Maurus Cuelenaere
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview
@ 2010-01-18 11:13 ` Maurus Cuelenaere
0 siblings, 0 replies; 26+ messages in thread
From: Maurus Cuelenaere @ 2010-01-18 11:13 UTC (permalink / raw)
To: linux-arm-kernel
Op 18-01-10 09:45, Ben Dooks schreef:
> Start Documentation/arm/Samsung and add an initial overview file
> which whilst is not complete, is better than nothing.
>
> Signed-off-by: Ben Dooks<ben-linux@fluff.org>
> ---
> Documentation/arm/Samsung/Overview.txt | 63 ++++++++++++++++++++++++++++++++
> 1 files changed, 63 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/arm/Samsung/Overview.txt
>
> diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
> new file mode 100644
> index 0000000..c3d2f44
> --- /dev/null
> +++ b/Documentation/arm/Samsung/Overview.txt
> @@ -0,0 +1,63 @@
> + Samsung ARM Linux Overview
> + ==========================
> +
> +Introduction
> +------------
> +
> + The Samsung range of ARM SoCs spans many similar devices, from the initial
> + ARM9 through to the newest ARM cores. This document shows an overview of
> + the current kernel support, how to use it and where to find the code
> + that supports this.
> +
> + The currently supported SoCs are:
> +
> + - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
> + - S3C64XX: S3C6400 and S3C6410
> +
> + S5PC100 and S5PC110 support is currently being merged
> +
> +
> +S3C24XX Systems
> +---------------
> +
> + There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
>
Same typo as before? Docuemntation -> Documentation
> + deals with the architecture and drivers specific to these devices.
> +
> + See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
> + on the implementation details and specific support.
> +
> +
> +Configuration
> +-------------
> +
> + A number of configurations are supplied, as there is no current way of
> + unifying all the SoCs into one kernel.
> +
> + [ to finish ]
> +
> +Layout
> +------
> +
> + [ to finish ]
> +
> +
> +Port Contributors
> +-----------------
> +
> + Ben Dooks (BJD)
> + Vincent Sanders
> + Herbert Potzl
> + Arnaud Patard (RTP)
> + Roc Wu
> + Klaus Fetscher
> + Dimitry Andric
> + Shannon Holland
> + Guillaume Gourat (NexVision)
> + Christer Weinigel (wingel) (Acer N30)
> + Lucas Correia Villa Real (S3C2400 port)
> +
> +
> +Document Author
> +---------------
> +
> +Copyright 2009 Ben Dooks<ben-linux@fluff.org>
>
Regards,
Maurus Cuelenaere
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview
2010-01-18 11:13 ` Maurus Cuelenaere
@ 2010-01-19 0:35 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-19 0:35 UTC (permalink / raw)
To: Maurus Cuelenaere; +Cc: Ben Dooks, linux-samsung-soc, linux-arm-kernel
On Mon, Jan 18, 2010 at 12:13:34PM +0100, Maurus Cuelenaere wrote:
> Op 18-01-10 09:45, Ben Dooks schreef:
>> Start Documentation/arm/Samsung and add an initial overview file
>> which whilst is not complete, is better than nothing.
>>
>> Signed-off-by: Ben Dooks<ben-linux@fluff.org>
>> ---
>> Documentation/arm/Samsung/Overview.txt | 63 ++++++++++++++++++++++++++++++++
>> 1 files changed, 63 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/arm/Samsung/Overview.txt
>>
>> diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
>> new file mode 100644
>> index 0000000..c3d2f44
>> --- /dev/null
>> +++ b/Documentation/arm/Samsung/Overview.txt
>> @@ -0,0 +1,63 @@
>> + Samsung ARM Linux Overview
>> + ==========================
>> +
>> +Introduction
>> +------------
>> +
>> + The Samsung range of ARM SoCs spans many similar devices, from the initial
>> + ARM9 through to the newest ARM cores. This document shows an overview of
>> + the current kernel support, how to use it and where to find the code
>> + that supports this.
>> +
>> + The currently supported SoCs are:
>> +
>> + - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
>> + - S3C64XX: S3C6400 and S3C6410
>> +
>> + S5PC100 and S5PC110 support is currently being merged
>> +
>> +
>> +S3C24XX Systems
>> +---------------
>> +
>> + There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
>>
>
> Same typo as before? Docuemntation -> Documentation
Fixed in next-samsung-doc1 branch, forgot to remove this one from this
series.
>> + deals with the architecture and drivers specific to these devices.
>> +
>> + See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
>> + on the implementation details and specific support.
>> +
>> +
>> +Configuration
>> +-------------
>> +
>> + A number of configurations are supplied, as there is no current way of
>> + unifying all the SoCs into one kernel.
>> +
>> + [ to finish ]
>> +
>> +Layout
>> +------
>> +
>> + [ to finish ]
>> +
>> +
>> +Port Contributors
>> +-----------------
>> +
>> + Ben Dooks (BJD)
>> + Vincent Sanders
>> + Herbert Potzl
>> + Arnaud Patard (RTP)
>> + Roc Wu
>> + Klaus Fetscher
>> + Dimitry Andric
>> + Shannon Holland
>> + Guillaume Gourat (NexVision)
>> + Christer Weinigel (wingel) (Acer N30)
>> + Lucas Correia Villa Real (S3C2400 port)
>> +
>> +
>> +Document Author
>> +---------------
>> +
>> +Copyright 2009 Ben Dooks<ben-linux@fluff.org>
>>
>
> Regards,
> Maurus Cuelenaere
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview
@ 2010-01-19 0:35 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-19 0:35 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 18, 2010 at 12:13:34PM +0100, Maurus Cuelenaere wrote:
> Op 18-01-10 09:45, Ben Dooks schreef:
>> Start Documentation/arm/Samsung and add an initial overview file
>> which whilst is not complete, is better than nothing.
>>
>> Signed-off-by: Ben Dooks<ben-linux@fluff.org>
>> ---
>> Documentation/arm/Samsung/Overview.txt | 63 ++++++++++++++++++++++++++++++++
>> 1 files changed, 63 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/arm/Samsung/Overview.txt
>>
>> diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
>> new file mode 100644
>> index 0000000..c3d2f44
>> --- /dev/null
>> +++ b/Documentation/arm/Samsung/Overview.txt
>> @@ -0,0 +1,63 @@
>> + Samsung ARM Linux Overview
>> + ==========================
>> +
>> +Introduction
>> +------------
>> +
>> + The Samsung range of ARM SoCs spans many similar devices, from the initial
>> + ARM9 through to the newest ARM cores. This document shows an overview of
>> + the current kernel support, how to use it and where to find the code
>> + that supports this.
>> +
>> + The currently supported SoCs are:
>> +
>> + - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
>> + - S3C64XX: S3C6400 and S3C6410
>> +
>> + S5PC100 and S5PC110 support is currently being merged
>> +
>> +
>> +S3C24XX Systems
>> +---------------
>> +
>> + There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
>>
>
> Same typo as before? Docuemntation -> Documentation
Fixed in next-samsung-doc1 branch, forgot to remove this one from this
series.
>> + deals with the architecture and drivers specific to these devices.
>> +
>> + See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
>> + on the implementation details and specific support.
>> +
>> +
>> +Configuration
>> +-------------
>> +
>> + A number of configurations are supplied, as there is no current way of
>> + unifying all the SoCs into one kernel.
>> +
>> + [ to finish ]
>> +
>> +Layout
>> +------
>> +
>> + [ to finish ]
>> +
>> +
>> +Port Contributors
>> +-----------------
>> +
>> + Ben Dooks (BJD)
>> + Vincent Sanders
>> + Herbert Potzl
>> + Arnaud Patard (RTP)
>> + Roc Wu
>> + Klaus Fetscher
>> + Dimitry Andric
>> + Shannon Holland
>> + Guillaume Gourat (NexVision)
>> + Christer Weinigel (wingel) (Acer N30)
>> + Lucas Correia Villa Real (S3C2400 port)
>> +
>> +
>> +Document Author
>> +---------------
>> +
>> +Copyright 2009 Ben Dooks<ben-linux@fluff.org>
>>
>
> Regards,
> Maurus Cuelenaere
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH] ARM: SAMSUNG: Make UART device code common
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a
common entry in plat-samsung since they are the same in all the current
implementations.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c24xx/devs.c | 28 ------------------------
arch/arm/plat-s3c64xx/dev-uart.c | 29 -------------------------
arch/arm/plat-s5p/dev-uart.c | 28 ------------------------
arch/arm/plat-s5pc1xx/dev-uart.c | 29 -------------------------
arch/arm/plat-samsung/Makefile | 1 +
arch/arm/plat-samsung/dev-uart.c | 44 ++++++++++++++++++++++++++++++++++++++
6 files changed, 45 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/plat-samsung/dev-uart.c
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a3..38c358c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -112,34 +112,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
},
};
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
index 62c11a6..f797f74 100644
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ b/arch/arm/plat-s3c64xx/dev-uart.c
@@ -145,32 +145,3 @@ struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
.nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index af726f4..23c7531 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -135,31 +135,3 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
.nr_resources = ARRAY_SIZE(s5p_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s5p_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s5p_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s5p_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s5p_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s5p_uart_device0,
- &s5p_uart_device1,
- &s5p_uart_device2,
- &s5p_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
index f749bc5..586c95c 100644
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -143,32 +143,3 @@ struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
.nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index aeb7e12..f834e42 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 0000000..3776cd9
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ * originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH] ARM: SAMSUNG: Make UART device code common
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a
common entry in plat-samsung since they are the same in all the current
implementations.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c24xx/devs.c | 28 ------------------------
arch/arm/plat-s3c64xx/dev-uart.c | 29 -------------------------
arch/arm/plat-s5p/dev-uart.c | 28 ------------------------
arch/arm/plat-s5pc1xx/dev-uart.c | 29 -------------------------
arch/arm/plat-samsung/Makefile | 1 +
arch/arm/plat-samsung/dev-uart.c | 44 ++++++++++++++++++++++++++++++++++++++
6 files changed, 45 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/plat-samsung/dev-uart.c
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a3..38c358c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -112,34 +112,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
},
};
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
index 62c11a6..f797f74 100644
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ b/arch/arm/plat-s3c64xx/dev-uart.c
@@ -145,32 +145,3 @@ struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
.nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index af726f4..23c7531 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -135,31 +135,3 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
.nr_resources = ARRAY_SIZE(s5p_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s5p_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s5p_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s5p_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s5p_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s5p_uart_device0,
- &s5p_uart_device1,
- &s5p_uart_device2,
- &s5p_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
index f749bc5..586c95c 100644
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -143,32 +143,3 @@ struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
.nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index aeb7e12..f834e42 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 0000000..3776cd9
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ * originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH] ARM: SAMSUNG: Add platform data registration for OHCI
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
Add a platform data helper for the OHCI device
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2410/usb-simtec.c | 4 ++--
arch/arm/mach-s3c2442/mach-gta02.c | 5 ++---
arch/arm/plat-s3c/include/plat/usb-control.h | 2 ++
arch/arm/plat-samsung/dev-usb.c | 21 ++++++++++++++++++++-
4 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 199bb4f..29bd3d9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
}
}
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
.port[0] = {
.flags = S3C_HCDFLG_USED
},
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
- s3c_device_ohci.dev.platform_data = &usb_simtec_info;
+ s3c_ohci_set_platdata(&usb_simtec_info);
return 0;
}
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 825800b..45799c6 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -544,7 +544,7 @@ static struct platform_device gta02_bl_dev = {
/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
.port[0] = {
.flags = S3C_HCDFLG_USED,
},
@@ -623,9 +623,8 @@ static void __init gta02_machine_init(void)
INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
#endif
- s3c_device_ohci.dev.platform_data = >a02_usb_info;
-
s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c_ohci_set_platdata(>a02_usb_info);
s3c_nand_set_platdata(>a02_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h
index 822c87f..a6a57bf 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-s3c/include/plat/usb-control.h
@@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port
}
}
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 431ae5d..8816565 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -19,7 +19,7 @@
#include <mach/map.h>
#include <plat/devs.h>
-
+#include <plat/usb-control.h>
static struct resource s3c_usb_resource[] = {
[0] = {
@@ -48,3 +48,22 @@ struct platform_device s3c_device_ohci = {
};
EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+ struct s3c2410_hcd_info *npd;
+
+ npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_ohci.dev.platform_data = npd;
+}
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH] ARM: SAMSUNG: Add platform data registration for OHCI
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
Add a platform data helper for the OHCI device
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2410/usb-simtec.c | 4 ++--
arch/arm/mach-s3c2442/mach-gta02.c | 5 ++---
arch/arm/plat-s3c/include/plat/usb-control.h | 2 ++
arch/arm/plat-samsung/dev-usb.c | 21 ++++++++++++++++++++-
4 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 199bb4f..29bd3d9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
}
}
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
.port[0] = {
.flags = S3C_HCDFLG_USED
},
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
- s3c_device_ohci.dev.platform_data = &usb_simtec_info;
+ s3c_ohci_set_platdata(&usb_simtec_info);
return 0;
}
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 825800b..45799c6 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -544,7 +544,7 @@ static struct platform_device gta02_bl_dev = {
/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
.port[0] = {
.flags = S3C_HCDFLG_USED,
},
@@ -623,9 +623,8 @@ static void __init gta02_machine_init(void)
INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
#endif
- s3c_device_ohci.dev.platform_data = >a02_usb_info;
-
s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c_ohci_set_platdata(>a02_usb_info);
s3c_nand_set_platdata(>a02_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h
index 822c87f..a6a57bf 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-s3c/include/plat/usb-control.h
@@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port
}
}
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 431ae5d..8816565 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -19,7 +19,7 @@
#include <mach/map.h>
#include <plat/devs.h>
-
+#include <plat/usb-control.h>
static struct resource s3c_usb_resource[] = {
[0] = {
@@ -48,3 +48,22 @@ struct platform_device s3c_device_ohci = {
};
EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+ struct s3c2410_hcd_info *npd;
+
+ npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_ohci.dev.platform_data = npd;
+}
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH] ARM: MINI2440: Remove commented out devices from device array
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
There's no point in having these in until there is proper support for
them, so remove as they only confuse the device changing script.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/mach-mini2440.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 347eb6d..65ea3b5 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -508,7 +508,6 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
static struct platform_device *mini2440_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_wdt,
-/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usbgadget,
@@ -522,8 +521,6 @@ static struct platform_device *mini2440_devices[] __initdata = {
&s3c_device_sdi,
&s3c_device_iis,
&mini2440_audio,
-/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */
- /* remaining devices are optional */
};
static void __init mini2440_map_io(void)
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH] ARM: MINI2440: Remove commented out devices from device array
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
There's no point in having these in until there is proper support for
them, so remove as they only confuse the device changing script.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2440/mach-mini2440.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 347eb6d..65ea3b5 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -508,7 +508,6 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
static struct platform_device *mini2440_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_wdt,
-/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usbgadget,
@@ -522,8 +521,6 @@ static struct platform_device *mini2440_devices[] __initdata = {
&s3c_device_sdi,
&s3c_device_iis,
&mini2440_audio,
-/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */
- /* remaining devices are optional */
};
static void __init mini2440_map_io(void)
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH] ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().
2010-01-18 8:45 ` Ben Dooks
@ 2010-01-18 8:45 ` Ben Dooks
-1 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-samsung-soc, linux-arm-kernel; +Cc: Ben Dooks
Add a s3c24xx_mci_set_platdata() call for all the machine files that have
platform data for the MCI driver. This brings the MCI device into line with
the other devices with __initdata and a specific call to ensure the right
structure type is being passed.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2410/mach-h1940.c | 5 ++---
arch/arm/mach-s3c2440/mach-at2440evb.c | 5 ++---
arch/arm/mach-s3c2440/mach-mini2440.c | 3 +--
arch/arm/plat-s3c24xx/devs.c | 12 ++++++++++++
arch/arm/plat-s3c24xx/include/plat/mci.h | 9 +++++++++
5 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 3f9217d..fbedd07 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -196,7 +196,7 @@ static struct platform_device h1940_device_bluetooth = {
.id = -1,
};
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPF(5),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL,
@@ -311,12 +311,11 @@ static void __init h1940_init(void)
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
+ s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
- s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 0defde6..8472579 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -165,7 +165,7 @@ static struct platform_device at2440evb_device_eth = {
},
};
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
.gpio_detect = S3C2410_GPG(10),
};
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
static void __init at2440evb_map_io(void)
{
- s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
@@ -226,6 +224,7 @@ static void __init at2440evb_map_io(void)
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
s3c_nand_set_platdata(&at2440evb_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 65ea3b5..571b176 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -528,8 +528,6 @@ static void __init mini2440_map_io(void)
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
- s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
}
/*
@@ -675,6 +673,7 @@ static void __init mini2440_init(void)
}
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
s3c_nand_set_platdata(&mini2440_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 38c358c..3acb534 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -351,6 +351,18 @@ struct platform_device s3c_device_sdi = {
EXPORT_SYMBOL(s3c_device_sdi);
+void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+ struct s3c24xx_mci_pdata *npd;
+
+ npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory to copy pdata", __func__);
+
+ s3c_device_sdi.dev.platform_data = npd;
+}
+
+
/* SPI (0) */
static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 36aaa10..2ac2b21 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata {
unsigned short vdd);
};
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
#endif /* _ARCH_NCI_H */
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH] ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().
@ 2010-01-18 8:45 ` Ben Dooks
0 siblings, 0 replies; 26+ messages in thread
From: Ben Dooks @ 2010-01-18 8:45 UTC (permalink / raw)
To: linux-arm-kernel
Add a s3c24xx_mci_set_platdata() call for all the machine files that have
platform data for the MCI driver. This brings the MCI device into line with
the other devices with __initdata and a specific call to ensure the right
structure type is being passed.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2410/mach-h1940.c | 5 ++---
arch/arm/mach-s3c2440/mach-at2440evb.c | 5 ++---
arch/arm/mach-s3c2440/mach-mini2440.c | 3 +--
arch/arm/plat-s3c24xx/devs.c | 12 ++++++++++++
arch/arm/plat-s3c24xx/include/plat/mci.h | 9 +++++++++
5 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 3f9217d..fbedd07 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -196,7 +196,7 @@ static struct platform_device h1940_device_bluetooth = {
.id = -1,
};
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPF(5),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL,
@@ -311,12 +311,11 @@ static void __init h1940_init(void)
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
+ s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
- s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 0defde6..8472579 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -165,7 +165,7 @@ static struct platform_device at2440evb_device_eth = {
},
};
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
.gpio_detect = S3C2410_GPG(10),
};
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
static void __init at2440evb_map_io(void)
{
- s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
@@ -226,6 +224,7 @@ static void __init at2440evb_map_io(void)
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
s3c_nand_set_platdata(&at2440evb_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 65ea3b5..571b176 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -528,8 +528,6 @@ static void __init mini2440_map_io(void)
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
- s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
}
/*
@@ -675,6 +673,7 @@ static void __init mini2440_init(void)
}
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
s3c_nand_set_platdata(&mini2440_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 38c358c..3acb534 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -351,6 +351,18 @@ struct platform_device s3c_device_sdi = {
EXPORT_SYMBOL(s3c_device_sdi);
+void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+ struct s3c24xx_mci_pdata *npd;
+
+ npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory to copy pdata", __func__);
+
+ s3c_device_sdi.dev.platform_data = npd;
+}
+
+
/* SPI (0) */
static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 36aaa10..2ac2b21 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata {
unsigned short vdd);
};
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
#endif /* _ARCH_NCI_H */
--
1.6.0.4
^ permalink raw reply related [flat|nested] 26+ messages in thread