Re: sata_nv times out for BD-ROM iHOS104-08

[Tejun Heo <tj@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 494 bytes --]

Hello,

On 01/18/2010 12:28 AM, Ozan Çağlayan wrote:
> [    9.769407] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)                                                  
> [    9.775326] ata1.00: configured for UDMA/33                                  
> [    9.775408] ata1.00: TEST_UNIT_READY failed (err_mask=0x2)                 

Hmmm... err_mask=0x2 is HSM error.  Strange.  Does the attached patch
make any difference?

Thanks.

-- 
tejun

[-- Attachment #2: disable-clear-ua.patch --]
[-- Type: text/x-patch, Size: 747 bytes --]

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0ea97c9..df261ac 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3530,7 +3530,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		/* If reset has been issued, clear UA to avoid
 		 * disrupting the current users of the device.
 		 */
-		if (ehc->i.flags & ATA_EHI_DID_RESET) {
+		/*if (ehc->i.flags & ATA_EHI_DID_RESET) {
 			ata_for_each_dev(dev, link, ALL) {
 				if (dev->class != ATA_DEV_ATAPI)
 					continue;
@@ -3538,7 +3538,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 				if (rc)
 					goto dev_fail;
 			}
-		}
+		}*/
 
 		/* retry flush if necessary */
 		ata_for_each_dev(dev, link, ALL) {