From: "sxzzsf(Shengfeng Zhou)" <sxzzsf@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: 2.6.32.4 PL2303 USB-serial can not connect to another serial port
Date: Fri, 22 Jan 2010 09:56:03 +0800 [thread overview]
Message-ID: <4B5905B3.2010309@gmail.com> (raw)
When I connect PL2303 USB-serial to another pc's serial port using
minicom, the USB-serial always failes to communicate. Here is the kernel
message:
[ 5263.206082] usb 3-1: new full speed USB device using uhci_hcd and
address 18
[ 5263.346493] usb 3-1: configuration #1 chosen from 1 choice
[ 5263.350744] pl2303 3-1:1.0: pl2303 converter detected
[ 5263.350757] drivers/usb/serial/pl2303.c: device type: 1
[ 5263.352319] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5263.353317] drivers/usb/serial/pl2303.c: 0x40:0x1:0x404:0x0 0
[ 5263.354317] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5263.355528] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8383:0x0 1 - 0
[ 5263.357775] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5263.358319] drivers/usb/serial/pl2303.c: 0x40:0x1:0x404:0x1 0
[ 5263.359318] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5263.360318] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8383:0x0 1 - 0
[ 5263.361331] drivers/usb/serial/pl2303.c: 0x40:0x1:0x0:0x1 0
[ 5263.362329] drivers/usb/serial/pl2303.c: 0x40:0x1:0x1:0x0 0
[ 5263.363330] drivers/usb/serial/pl2303.c: 0x40:0x1:0x2:0x24 0
[ 5263.363422] usb 3-1: pl2303 converter now attached to ttyUSB0
[ 5271.783112] drivers/usb/serial/pl2303.c: pl2303_open - port 0
[ 5271.785731] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5271.786733] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 0 0 0 0 0 0
[ 5271.786737] drivers/usb/serial/pl2303.c: pl2303_set_termios - data
bits = 8
[ 5271.786740] drivers/usb/serial/pl2303.c: pl2303_set_termios - baud
requested = 0
[ 5271.786743] drivers/usb/serial/pl2303.c: pl2303_set_termios - stop
bits = 1
[ 5271.786746] drivers/usb/serial/pl2303.c: pl2303_set_termios - parity
= none
[ 5271.789968] drivers/usb/serial/pl2303.c: 0x21:0x20:0:0 7
[ 5271.790739] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 0 0 0 0 0 8
[ 5271.791735] drivers/usb/serial/pl2303.c: 0x40:0x1:0x0:0x0 0
[ 5271.791740] drivers/usb/serial/pl2303.c: pl2303_open - submitting
read urb
[ 5271.791746] drivers/usb/serial/pl2303.c: pl2303_open - submitting
interrupt urb
[ 5271.791776] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.791780] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.791790] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5271.791794] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 0
[ 5271.791802] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.791805] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.791814] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5402
[ 5271.791817] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5402
[ 5271.791823] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5271.792734] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 0 0 0 0 0 8
[ 5271.792739] drivers/usb/serial/pl2303.c: pl2303_set_termios - data
bits = 8
[ 5271.792743] drivers/usb/serial/pl2303.c: pl2303_set_termios - baud
requested = 38400
[ 5271.792747] drivers/usb/serial/pl2303.c: pl2303_set_termios - baud
set = 38400
[ 5271.792751] drivers/usb/serial/pl2303.c: pl2303_set_termios - stop
bits = 1
[ 5271.792754] drivers/usb/serial/pl2303.c: pl2303_set_termios - parity
= none
[ 5271.793723] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5271.793729] pl2303 ttyUSB0: pl2303_read_int_callback - length = 10,
data = a1 20 00 00 00 00 02 00 00 00
[ 5271.793754] drivers/usb/serial/pl2303.c: 0x21:0x20:0:0 7
[ 5271.794734] drivers/usb/serial/pl2303.c: set_control_lines - value =
3, retval = 0
[ 5271.795724] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5271.795729] pl2303 ttyUSB0: pl2303_read_int_callback - length = 10,
data = a1 20 00 00 00 00 02 00 08 00
[ 5271.795755] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 96 0 0
0 0 8
[ 5271.796733] drivers/usb/serial/pl2303.c: 0x40:0x1:0x0:0x0 0
[ 5271.796740] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5271.796744] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 86
[ 5271.797734] drivers/usb/serial/pl2303.c: set_control_lines - value =
3, retval = 0
[ 5271.797741] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.797744] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.797749] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5402
[ 5271.797753] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5402
[ 5271.797758] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5271.797768] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.797772] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.797776] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5402
[ 5271.797780] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5402
[ 5271.797784] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5271.797789] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.797793] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.797797] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5402
[ 5271.797801] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5402
[ 5271.797805] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5271.797810] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x540b
[ 5271.797814] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x540b
[ 5271.809718] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.809729] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.809740] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5271.809746] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5271.809754] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5402
[ 5271.809760] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5402
[ 5271.809771] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5271.812539] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 96 0 0
0 0 8
[ 5271.812545] drivers/usb/serial/pl2303.c: pl2303_set_termios - data
bits = 8
[ 5271.812548] drivers/usb/serial/pl2303.c: pl2303_set_termios - baud
requested = 0
[ 5271.812552] drivers/usb/serial/pl2303.c: pl2303_set_termios - stop
bits = 1
[ 5271.812554] drivers/usb/serial/pl2303.c: pl2303_set_termios - parity
= none
[ 5271.812727] drivers/usb/serial/pl2303.c: 0x21:0x20:0:0 7
[ 5271.813733] drivers/usb/serial/pl2303.c: set_control_lines - value =
0, retval = 0
[ 5271.814732] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 96 0 0
0 0 8
[ 5271.815731] drivers/usb/serial/pl2303.c: 0x40:0x1:0x0:0x0 0
[ 5272.815844] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5402
[ 5272.815853] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5402
[ 5272.815864] drivers/usb/serial/pl2303.c: pl2303_set_termios - port 0
[ 5272.817801] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 96 0 0
0 0 8
[ 5272.817809] drivers/usb/serial/pl2303.c: pl2303_set_termios - data
bits = 8
[ 5272.817816] drivers/usb/serial/pl2303.c: pl2303_set_termios - baud
requested = 38400
[ 5272.817823] drivers/usb/serial/pl2303.c: pl2303_set_termios - baud
set = 38400
[ 5272.817829] drivers/usb/serial/pl2303.c: pl2303_set_termios - stop
bits = 1
[ 5272.817835] drivers/usb/serial/pl2303.c: pl2303_set_termios - parity
= none
[ 5272.818792] drivers/usb/serial/pl2303.c: 0x21:0x20:0:0 7
[ 5272.819790] drivers/usb/serial/pl2303.c: set_control_lines - value =
3, retval = 0
[ 5272.820775] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5272.820784] pl2303 ttyUSB0: pl2303_read_int_callback - length = 10,
data = a1 20 00 00 00 00 02 00 08 00
[ 5272.820822] drivers/usb/serial/pl2303.c: 0xa1:0x21:0:0 7 - 0 96 0 0
0 0 8
[ 5272.821775] drivers/usb/serial/pl2303.c: 0x40:0x1:0x0:0x0 0
[ 5273.821933] drivers/usb/serial/pl2303.c: pl2303_write - port 0, 1 bytes
[ 5273.821943] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5273.821950] pl2303 ttyUSB0: pl2303_send - length = 1, data = 0d
[ 5273.823828] drivers/usb/serial/pl2303.c: pl2303_write_bulk_callback -
port 0
[ 5273.823835] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5274.822070] drivers/usb/serial/pl2303.c: pl2303_write - port 0, 1 bytes
[ 5274.822080] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5274.822087] pl2303 ttyUSB0: pl2303_send - length = 1, data = 41
[ 5274.822108] drivers/usb/serial/pl2303.c: pl2303_write - port 0, 1 bytes
[ 5274.822114] drivers/usb/serial/pl2303.c: pl2303_send - port 0
...repeated...
[ 5274.822496] drivers/usb/serial/pl2303.c: pl2303_write - port 0, 1 bytes
[ 5274.822502] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5274.822509] drivers/usb/serial/pl2303.c: pl2303_write - port 0, 1 bytes
[ 5274.822515] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5274.822523] drivers/usb/serial/pl2303.c: pl2303_write - port 0, 1 bytes
[ 5274.822529] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5274.822935] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5274.822942] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 86
[ 5274.822951] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5274.822957] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5274.822982] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5274.822988] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 32
[ 5274.822994] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5274.823001] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 991
[ 5274.823862] drivers/usb/serial/pl2303.c: pl2303_write_bulk_callback -
port 0
[ 5274.823869] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5274.823875] pl2303 ttyUSB0: pl2303_send - length = 32, data = 54 20
53 37 3d 34 35 20 53 30 3d 30 20 4c 31 20 56 31 20 58 34 20 26 63 31 20
45 31 20 51 30 0d
[ 5274.824860] drivers/usb/serial/pl2303.c: pl2303_write_bulk_callback -
port 0
[ 5274.824868] drivers/usb/serial/pl2303.c: pl2303_send - port 0
[ 5275.824051] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5275.824061] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5275.824068] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5275.824074] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5275.824089] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5275.824096] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 86
[ 5275.824105] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5275.824112] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5275.824127] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5275.824133] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5275.824139] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5275.824145] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5276.824223] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5276.824233] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5276.824240] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5276.824246] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5276.824261] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5276.824267] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 86
[ 5276.824277] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5276.824283] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5276.824298] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5276.824305] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5276.824311] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5276.824317] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5277.825368] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5277.825378] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5277.825385] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5277.825391] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5277.825406] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5277.825412] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 86
[ 5277.825422] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5277.825428] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5277.825444] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5277.825450] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5277.825456] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5277.825462] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5278.769054] drivers/usb/serial/pl2303.c: pl2303_read_bulk_callback -
port 0
[ 5278.769060] drivers/usb/serial/pl2303.c: pl2303_read_bulk_callback -
urb status = -75
[ 5278.769063] drivers/usb/serial/pl2303.c: pl2303_read_bulk_callback -
unable to handle the error, exiting.
[ 5278.771048] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5278.771053] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.775055] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5278.775060] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.779056] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
...repeated...
[ 5278.819072] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.823064] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5278.823072] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.826514] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5278.826521] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5278.826528] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5278.826534] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5278.826549] drivers/usb/serial/pl2303.c: pl2303_tiocmget (0)
[ 5278.826555] drivers/usb/serial/pl2303.c: pl2303_tiocmget - result = 86
[ 5278.826565] drivers/usb/serial/pl2303.c: pl2303_ioctl (0) cmd = 0x5401
[ 5278.826572] drivers/usb/serial/pl2303.c: pl2303_ioctl not supported =
0x5401
[ 5278.826587] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer - port 0
[ 5278.826593] drivers/usb/serial/pl2303.c: pl2303_chars_in_buffer -
returns 0
[ 5278.826599] drivers/usb/serial/pl2303.c: pl2303_write_room - port 0
[ 5278.826605] drivers/usb/serial/pl2303.c: pl2303_write_room - returns 1023
[ 5278.827049] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5278.827057] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.831065] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5278.831074] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.831065] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
...repeated...
[ 5278.995081] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5278.999073] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5278.999082] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
nonzero urb status received: -84
[ 5279.000088] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 5279.000096] usb 3-1: USB disconnect, address 18
[ 5279.002070] drivers/usb/serial/pl2303.c: pl2303_read_int_callback (0)
[ 5279.002079] drivers/usb/serial/pl2303.c: pl2303_read_int_callback -
urb shutting down with status: -108
[ 5279.002217] drivers/usb/serial/pl2303.c: pl2303_close - port 0
[ 5279.002224] drivers/usb/serial/pl2303.c: pl2303_close - shutting down
urbs
[ 5279.002352] pl2303 ttyUSB0: pl2303 converter now disconnected from
ttyUSB0
[ 5279.002376] pl2303 3-1:1.0: device disconnected
[ 5279.102054] drivers/usb/serial/pl2303.c: set_control_lines - value =
0, retval = -19
[ 5279.261027] usb 3-1: new full speed USB device using uhci_hcd and
address 19
[ 5279.399266] usb 3-1: configuration #1 chosen from 1 choice
[ 5279.403472] pl2303 3-1:1.0: pl2303 converter detected
[ 5279.403485] drivers/usb/serial/pl2303.c: device type: 1
[ 5279.405093] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5279.406098] drivers/usb/serial/pl2303.c: 0x40:0x1:0x404:0x0 0
[ 5279.407158] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5279.408159] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8383:0x0 1 - 0
[ 5279.409159] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5279.410111] drivers/usb/serial/pl2303.c: 0x40:0x1:0x404:0x1 0
[ 5279.411082] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8484:0x0 1 - 0
[ 5279.413092] drivers/usb/serial/pl2303.c: 0xc0:0x1:0x8383:0x0 1 - 0
[ 5279.414137] drivers/usb/serial/pl2303.c: 0x40:0x1:0x0:0x1 0
[ 5279.415082] drivers/usb/serial/pl2303.c: 0x40:0x1:0x1:0x0 0
[ 5279.416287] drivers/usb/serial/pl2303.c: 0x40:0x1:0x2:0x24 0
[ 5279.416383] usb 3-1: pl2303 converter now attached to ttyUSB1
reply other threads:[~2010-01-22 1:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B5905B3.2010309@gmail.com \
--to=sxzzsf@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.