From: Zhu Qingsen <zhuqs@cn.fujitsu.com>
To: linux-kernel@vger.kernel.org
Cc: nico@marvell.org
Subject: [Patch] Orion: Add Buffalo Linkstation LS-HGL support
Date: Mon, 25 Jan 2010 10:38:01 +0800 [thread overview]
Message-ID: <4B5D0409.3030908@cn.fujitsu.com> (raw)
This patch adds support for Buffalo Linkstation LS-HGL platform.
Signed-off-by: Zhu Qingsen <zhuqs@cn.fujitsu.com>
---
arch/arm/configs/orion5x_defconfig | 1 +
arch/arm/mach-orion5x/Kconfig | 7 +
arch/arm/mach-orion5x/Makefile | 1 +
arch/arm/mach-orion5x/ls_hgl-setup.c | 278 ++++++++++++++++++++++++++++++++++
4 files changed, 287 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-orion5x/ls_hgl-setup.c
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 85b05d3..eacc9e9 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -192,6 +192,7 @@ CONFIG_MACH_TS209=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
CONFIG_MACH_TS409=y
CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c3d513c..905719a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation Mini platform.
+config MACH_LINKSTATION_LS_HGL
+ bool "Buffalo Linkstation LS-HGL"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation LS-HGL platform.
+
config MACH_TS409
bool "QNAP TS-409"
help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 89772fc..eb6eabc 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 0000000..c3bb87d
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,278 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "include/mach/system.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE 0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = LS_HGL_NOR_BOOT_BASE,
+ .end = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ls_hgl_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+ .phy_addr = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM 2
+#define LS_HGL_GPIO_LED_INFO 3
+#define LS_HGL_GPIO_LED_FUNC 17
+#define LS_HGL_GPIO_LED_PWR 0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+ {
+ .name = "alarm:red",
+ .gpio = LS_HGL_GPIO_LED_ALARM,
+ .active_low = 1,
+ }, {
+ .name = "info:amber",
+ .gpio = LS_HGL_GPIO_LED_INFO,
+ .active_low = 1,
+ }, {
+ .name = "func:blue:top",
+ .gpio = LS_HGL_GPIO_LED_FUNC,
+ .active_low = 1,
+ }, {
+ .name = "power:blue:bottom",
+ .gpio = LS_HGL_GPIO_LED_PWR,
+ },
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+ .leds = ls_hgl_led_pins,
+ .num_leds = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ls_hgl_led_data,
+ },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC 15
+#define LS_HGL_GPIO_KEY_POWER 8
+#define LS_HGL_GPIO_KEY_AUTOPOWER 10
+
+#define LS_HGL_SW_POWER 0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+ {
+ .code = KEY_OPTION,
+ .gpio = LS_HGL_GPIO_KEY_FUNC,
+ .desc = "Function Button",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LS_HGL_SW_POWER,
+ .gpio = LS_HGL_GPIO_KEY_POWER,
+ .desc = "Power-on Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LS_HGL_SW_AUTOPOWER,
+ .gpio = LS_HGL_GPIO_KEY_AUTOPOWER,
+ .desc = "Power-auto Switch",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+ .buttons = ls_hgl_buttons,
+ .nbuttons = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ls_hgl_button_data,
+ },
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+ .n_ports = 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+ arch_reset(0, NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER 9
+#define LS_HGL_GPIO_AUTO_POWER 10
+#define LS_HGL_GPIO_POWER 8
+
+#define LS_HGL_GPIO_HDD_POWER 1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* LED_PWR */
+ { 1, MPP_GPIO }, /* HDD_PWR */
+ { 2, MPP_GPIO }, /* LED_ALARM */
+ { 3, MPP_GPIO }, /* LED_INFO */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_GPIO }, /* FAN_LCK */
+ { 7, MPP_GPIO }, /* INIT */
+ { 8, MPP_GPIO }, /* POWER */
+ { 9, MPP_GPIO }, /* USB_PWR */
+ { 10, MPP_GPIO }, /* AUTO_POWER */
+ { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_UNUSED },
+ { 15, MPP_GPIO }, /* FUNC */
+ { 16, MPP_UNUSED },
+ { 17, MPP_GPIO }, /* LED_FUNC */
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&ls_hgl_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&ls_hgl_sata_data);
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+ LS_HGL_NOR_BOOT_SIZE);
+ platform_device_register(&ls_hgl_nor_flash);
+
+ platform_device_register(&ls_hgl_button_device);
+
+ platform_device_register(&ls_hgl_leds);
+
+ i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+ /* enable USB power */
+ gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+ /* register power-off method */
+ pm_power_off = ls_hgl_power_off;
+
+ pr_info("%s: finished\n", __func__);
+}
+
+#ifdef CONFIG_MACH_LINKSTATION_LS_HGL
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+ /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = ls_hgl_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
--
1.6.5
reply other threads:[~2010-01-25 2:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B5D0409.3030908@cn.fujitsu.com \
--to=zhuqs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nico@marvell.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.