From: Michal Simek <michal.simek@petalogix.com>
To: LKML <linux-kernel@vger.kernel.org>,
torvalds@linux-foundation.org, hpa@zytor.com
Cc: John Williams <john.williams@petalogix.com>
Subject: Split 'flush_old_exec' into two functions - 221af7f87b97431e3ee21ce4b0e77d5411cf1549
Date: Mon, 01 Feb 2010 15:00:04 +0100 [thread overview]
Message-ID: <4B66DE64.8010101@petalogix.com> (raw)
Hi Peter and Linus,
commit 221af7f87b97431e3ee21ce4b0e77d5411cf1549 breaks anything on
Microblaze. Below is my log.
I reverted this patch in my repo.
Any idea what can be wrong?
None reported any problem that's why I think that is Microblaze related.
Thanks,
Michal
early_printk_console is enabled at 0x84000000
Ramdisk addr 0x00000003, FDT at 0x00000076
<5>Linux version 2.6.33-rc6-00859-gabe94c7-dirty (monstr@monstr.eu) (gcc
version 4.1.2) #33 Mon Feb 1 14:48:17 CET 2010
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
<6>[ 0.000000] setup_memory: max_mapnr: 0x10000
[ 0.000000] setup_memory: min_low_pfn: 0x50000
[ 0.000000] setup_memory: max_low_pfn: 0x60000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c026a77c, node_mem_map c0945000
Normal zone: 512 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyUL0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 249984k/262144k available
Hierarchical RCU implementation.
NR_IRQS:32
xlnx,xps-intc-1.00.a #0 at 0xd0000000, num_irq=6, edge=0x2e
xlnx,xps-timer-1.00.a #0 at 0xd0004000, irq=2
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
Calibrating delay loop... 59.52 BogoMIPS (lpj=119040)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
XGpio: /plb@0/gpio@81400000: registered
Switching to clocksource microblaze_clocksource
microblaze_timer_set_mode: oneshot
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Skipping unavailable RESET gpio -2 (reset)
GPIO pin is already allocated
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 488
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
84000000.serial: ttyUL0 at MMIO 0x84000003 (irq = 5) is a uartlite
console [ttyUL0] enabled
86000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=255
erase region 1: offset=0x1fe0000,size=0x8000,blocks=4
RedBoot partition parsing not available
Creating 6 MTD partitions on "86000000.flash":
0x000000000000-0x000000100000 : "fpga"
0x000000100000-0x000000140000 : "boot"
0x000000140000-0x000000160000 : "bootenv"
0x000000160000-0x000000180000 : "config"
0x000000180000-0x000000980000 : "image"
0x000000980000-0x000002000000 : "spare"
xilinx_emaclite 81000000.ethernet: Device Tree Probing
xilinx_emaclite 81000000.ethernet: MAC address is now 0: a:35: 0:22: 1
xilinx_emaclite 81000000.ethernet: Xilinx EmacLite at 0x81000000 mapped
to 0xD20A0000, irq=3
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 6928k freed
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting devpts:
/etc/rc.d/S02devpts: line 4: mount: not found
Mounting /etc/config:
Populating /etc/config:
flatfsd: Created 4 configuration files (167 bytes)
Mounting sysfs:
/etc/rc.d/S02sysfs: line 4: /bin/mount: Bad address
Setting hostname:
Bringing up network interfaces:
/etc/rc.d/S40network: line 4: /bin/ifup: Bad address
Starting portmap:
/etc/rc.d/S40network: line 8: /bin/portmap: Bad address
Starting uWeb server:
/etc/rc.d/S90uWeb:
Welcome to
_____ _ _ _
| ___ \ | | | | (_)
| |_/ / ___ | |_ __ _ | | _ _ __ _ _ __ __
| __/ / _ \| __| / _` || | | || '_ \ | | | |\ \/ /
| | | __/| |_ | (_| || |____| || | | || |_| | > <
\_| \___| \__| \__,_|\_____/|_||_| |_| \__,_|/_/\_\
on ml505-wt-emaclite
line 4: /home/httpd/cgi-bin/petalinux: Bad address
ml505-wt-emaclite login:
--
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
next reply other threads:[~2010-02-01 14:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 14:00 Michal Simek [this message]
2010-02-01 15:57 ` Split 'flush_old_exec' into two functions - 221af7f87b97431e3ee21ce4b0e77d5411cf1549 Linus Torvalds
2010-02-01 18:07 ` Jason Wessel
2010-02-01 18:41 ` H. Peter Anvin
2010-02-01 18:41 ` Linus Torvalds
2010-02-01 18:56 ` Jason Wessel
2010-02-01 19:32 ` H. Peter Anvin
2010-02-02 10:14 ` Michal Simek
2010-02-02 10:16 ` Michal Simek
2010-02-02 15:50 ` Linus Torvalds
2010-02-02 19:52 ` Michal Simek
2010-02-02 21:45 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B66DE64.8010101@petalogix.com \
--to=michal.simek@petalogix.com \
--cc=hpa@zytor.com \
--cc=john.williams@petalogix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.