From: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
To: "Ira W. Snyder" <iws-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
Cc: Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [net-next-2.6 v2] can: add support for CAN interface cards based on the PLX90xx PCI bridge
Date: Mon, 01 Feb 2010 21:31:06 +0100 [thread overview]
Message-ID: <4B673A0A.5080504@grandegger.com> (raw)
In-Reply-To: <20100201195611.GB32624-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
Ira W. Snyder wrote:
> On Tue, Feb 02, 2010 at 01:42:44AM +0600, Pavel B. Cheblakov wrote:
>> From: Pavel Cheblakov <P.B.Cheblakov-tHBF8D5G73F4OK5fxMSSsQ@public.gmane.org>
>>
>> This driver is for CAN interface cards based on the PLX90xx PCI bridge.
>> Driver supports now:
>> - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
>> - Adlink PCI-7841/cPCI-7841 SE card
>> - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
>> - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
>>
>> Changes since v1:
>> - Added some defines for static inline int plx_pci_check_sja1000(...)
>> - static struct pci_device_id plx_pci_tbl[] replaced by
>> static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl)
>> - Typo fixed
>>
>
> Hello,
>
> Any ideas if this driver could support the Janz PCI CAN cards as well? I
> don't have any documentation for the cards, and I'd love to get away
> from their closed-source drivers.
Is it a passive or and intelligent CAN PCI card? What is the name of the
card? A intelligent card will run its own firmware and you do not have
direct access to the SJA1000. Pavel plx_pci driver is quite generic and
it should not be a big deal to support a PLX90xx based passive card.
Wolfgang.
Wolfgang.
next prev parent reply other threads:[~2010-02-01 20:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 19:42 [net-next-2.6 v2] can: add support for CAN interface cards based on the PLX90xx PCI bridge Pavel B. Cheblakov
2010-02-01 19:56 ` Ira W. Snyder
[not found] ` <20100201195611.GB32624-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
2010-02-01 20:31 ` Wolfgang Grandegger [this message]
[not found] ` <4B673A0A.5080504-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-02-01 21:05 ` Ira W. Snyder
[not found] ` <20100201210507.GD32624-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
2010-02-02 8:02 ` Wolfgang Grandegger
[not found] ` <1265053364-24099-1-git-send-email-chebl-LmX6Lu7C9G7nhuLbLO4Grw@public.gmane.org>
2010-02-01 20:48 ` Wolfgang Grandegger
2010-02-04 2:39 ` David Miller
-- strict thread matches above, loose matches on Subject: below --
2010-02-01 19:30 Pavel Cheblakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B673A0A.5080504@grandegger.com \
--to=wg-5yr1bzd7o62+xt7jha+gda@public.gmane.org \
--cc=Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
--cc=iws-lulEs6mt1IksTUYHLfqkUA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.