From: Mauro Carvalho Chehab <maurochehab@gmail.com>
To: Andy Walls <awalls@radix.net>
Cc: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com>,
ivtv-devel@ivtvdriver.org, linux-media@vger.kernel.org
Subject: Re: [PATCH] AVerTV MCE 116 Plus radio
Date: Tue, 02 Feb 2010 13:29:58 -0200 [thread overview]
Message-ID: <4B6844F6.2090404@gmail.com> (raw)
In-Reply-To: <1258774767.9080.1.camel@palomino.walls.org>
Hi Andy,
This patch has never been applied or nacked. From your last comment, it
seems that you're waiting for Aleksandr Signed-of-by:.
If this is still the case, I suggest you to wait for a couple days. If he doesn't
send it, it is safe to add it without his SOB, since it is really a trivial change.
Cheers,
Mauro.
Andy Walls wrote:
> On Sun, 2009-10-11 at 04:01 +0300, Aleksandr V. Piskunov wrote:
>> On Tue, Oct 06, 2009 at 11:11:59AM +0300, Aleksandr V. Piskunov wrote:
>>> On Tue, Oct 06, 2009 at 11:04:06AM +0300, Aleksandr V. Piskunov wrote:
>>>> Added FM radio support to Avermedia AVerTV MCE 116 Plus card
>>>>
>>> What leaves me puzzled, radio only works ok with ivtv newi2c=1
>>>
>>> With default newi2c audio is tinny, metallic, with some strange static.
>>> Similar problem with pvr-150 was reported years ago, guess issue is still
>>> unresolved, perhaps something with cx25840..
>> This particular "tinny" audio problem is definitely I2C speed related, to be
>> more precise, audio only goes bad if i2c-algo-bit is being run with udelay
>> less than 15, i.e. i2c bus frequency is higher than 30 KHz.
>>
>> So with default udelay=10 or udelay=5 (optimal for IR reciever on that board)
>> radio goes bad. Running with newi2c=1 is ok, but again it isn't optimal for IR
>> reciever on AVerTV M116.
>>
>> I2C reads/writes to cx25840 themself are ok, verified using register readback
>> after each write/write4. Problem seems to be that with cx25840 register writes
>> coming too fast on higher i2c bus speed, switching register 0x808 _from_
>> TV standard autodetection mode (0xff) _to_ FM radio mode (0xf9) leaves chip
>> audio detection routine in inconsistent state.
>>
>> The only solution I found is to do standard routine (assert_reset + write +
>> deassert_reset) followed by 50ms delay and another reset.
>>
>> Following patch works_for_me, can be improved to only delay/doublereset when
>> really needed, etc. Andy, could you comment/review?
>
> Aleksandr,
>
> Could you provide your Signed-off-by for this patch? I'm going to
> commit it as is.
>
> Thanks,
> Andy
>
>> diff --git a/linux/drivers/media/video/cx25840/cx25840-core.c b/linux/drivers/media/video/cx25840/cx25840-core.c
>> --- a/linux/drivers/media/video/cx25840/cx25840-core.c
>> +++ b/linux/drivers/media/video/cx25840/cx25840-core.c
>> @@ -626,7 +642,13 @@
>> if (state->radio) {
>> cx25840_write(client, 0x808, 0xf9);
>> cx25840_write(client, 0x80b, 0x00);
>> - }
>> + /* Double reset cx2384x after setting FM radio mode, helps to
>> + avoid "tinny" audio when ivtv I2C bus is being run on
>> + frequency higher than 30 KHz */
>> + cx25840_and_or(client, 0x810, ~0x01, 0);
>> + msleep(50);
>> + cx25840_and_or(client, 0x810, ~0x01, 1);
>> + }
>> else if (std & V4L2_STD_525_60) {
>> /* Certain Hauppauge PVR150 models have a hardware bug
>> that causes audio to drop out. For these models the
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Cheers,
Mauro
next prev parent reply other threads:[~2010-02-02 15:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-06 8:04 [PATCH] AVerTV MCE 116 Plus radio Aleksandr V. Piskunov
2009-10-06 8:11 ` Aleksandr V. Piskunov
2009-10-11 1:01 ` Aleksandr V. Piskunov
2009-10-11 12:05 ` Andy Walls
2009-11-21 3:39 ` Andy Walls
2010-02-02 15:29 ` Mauro Carvalho Chehab [this message]
2010-02-04 0:33 ` Andy Walls
2010-02-09 14:15 ` Aleksandr V. Piskunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B6844F6.2090404@gmail.com \
--to=maurochehab@gmail.com \
--cc=aleksandr.v.piskunov@gmail.com \
--cc=awalls@radix.net \
--cc=ivtv-devel@ivtvdriver.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.