All of lore.kernel.org
 help / color / mirror / Atom feed
From: OHMURA Kei <ohmura.kei@lab.ntt.co.jp>
To: Jan Kiszka <jan.kiszka@siemens.com>,
	kvm@vger.kernel.org, qemu-devel@nongnu.org
Cc: avi@redhat.com, ohmura.kei@lab.ntt.co.jp
Subject: Re: [PATCH] qemu-kvm: Speed up of the dirty-bitmap-traveling
Date: Mon, 08 Feb 2010 20:23:37 +0900	[thread overview]
Message-ID: <4B6FF439.6030006@lab.ntt.co.jp> (raw)
In-Reply-To: <4B6FABCE.207@lab.ntt.co.jp>

>> Would be great if you could provide a version for upstream as well
>> because it will likely replace this qemu-kvm code on day.
> O.K.  We'll prepare it.


We have implemented the version for upstream.  Some source code are borrowed 
from qemu-kvm.c.  It is not fully tested yet, though.

We also did performance test against this patch.  Test environment is the same 
as the email I sent before.


Experimental results:
Test1: Guest OS read 3GB file, which is bigger than memory.
#called     orig.(msec)     patch(msec)     ratio
14          3.79            0.18            20.8
12          3.20            0.15            21.4
11          2.89            0.14            21.0
 
Test2: Guest OS read/write 3GB file, which is bigger than memory.
#called     orig.(msec)     patch(msec)     ratio
364         180             8.70            20.7
326         161             7.71            20.9
474         235             11.7            20.1


---
 kvm-all.c |   80 +++++++++++++++++++++++++++++++++++++++++++++++++-----------
 1 files changed, 65 insertions(+), 15 deletions(-)

diff --git a/kvm-all.c b/kvm-all.c
index 15ec38e..9666843 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -279,9 +279,69 @@ int kvm_set_migration_log(int enable)
     return 0;
 }
 
-static int test_le_bit(unsigned long nr, unsigned char *addr)
+static inline void kvm_get_dirty_pages_log_range_by_byte(unsigned int start,
+                                                         unsigned int end,
+                                                         unsigned char *bitmap,
+                                                         unsigned long offset)
 {
-    return (addr[nr >> 3] >> (nr & 7)) & 1;
+    unsigned int i, j, n = 0;
+    unsigned long page_number, addr, addr1;
+    ram_addr_t ram_addr;
+    unsigned char c;
+
+    /*   
+     * bitmap-traveling is faster than memory-traveling (for addr...)
+     * especially when most of the memory is not dirty.
+     */
+    for (i = start; i < end; i++) {
+        c = bitmap[i];
+        while (c > 0) {
+            j = ffsl(c) - 1;
+            c &= ~(1u << j);
+            page_number = i * 8 + j;
+            addr1 = page_number * TARGET_PAGE_SIZE;
+            addr = offset + addr1;
+            ram_addr = cpu_get_physical_page_desc(addr);
+            cpu_physical_memory_set_dirty(ram_addr);
+            n++;
+        }
+    }
+}
+
+static int kvm_get_dirty_pages_log_range_by_long(unsigned long start_addr,
+                                                 unsigned char *bitmap,
+                                                 unsigned long mem_size)
+{
+    unsigned int i;
+    unsigned int len;
+    unsigned long *bitmap_ul = (unsigned long *)bitmap;
+
+    /* bitmap-traveling by long size is faster than by byte size
+     * especially when most of memory is not dirty.
+     * bitmap should be long-size aligned for traveling by long.
+     */
+    if (((unsigned long)bitmap & (TARGET_LONG_SIZE - 1)) == 0) {
+        len = ((mem_size / TARGET_PAGE_SIZE) + TARGET_LONG_BITS - 1) / 
+            TARGET_LONG_BITS;
+        for (i = 0; i < len; i++)
+            if (bitmap_ul[i] != 0)
+                kvm_get_dirty_pages_log_range_by_byte(i * TARGET_LONG_SIZE,
+                    (i + 1) * TARGET_LONG_SIZE, bitmap, start_addr);
+        /*                                                      
+         * We will check the remaining dirty-bitmap, 
+         * when the mem_size is not a multiple of TARGET_LONG_SIZE. 
+         */
+        if ((mem_size & (TARGET_LONG_SIZE - 1)) != 0) {
+            len = ((mem_size / TARGET_PAGE_SIZE) + 7) / 8;
+            kvm_get_dirty_pages_log_range_by_byte(i * TARGET_LONG_SIZE,
+                len, bitmap, start_addr);
+        }
+    } else { /* slow path: traveling by byte. */
+        len = ((mem_size / TARGET_PAGE_SIZE) + 7) / 8;
+        kvm_get_dirty_pages_log_range_by_byte(0, len, bitmap, start_addr);
+    }
+
+    return 0;
 }
 
 /**
@@ -297,8 +357,6 @@ int kvm_physical_sync_dirty_bitmap(target_phys_addr_t start_addr,
 {
     KVMState *s = kvm_state;
     unsigned long size, allocated_size = 0;
-    target_phys_addr_t phys_addr;
-    ram_addr_t addr;
     KVMDirtyLog d;
     KVMSlot *mem;
     int ret = 0;
@@ -327,17 +385,9 @@ int kvm_physical_sync_dirty_bitmap(target_phys_addr_t start_addr,
             break;
         }
 
-        for (phys_addr = mem->start_addr, addr = mem->phys_offset;
-             phys_addr < mem->start_addr + mem->memory_size;
-             phys_addr += TARGET_PAGE_SIZE, addr += TARGET_PAGE_SIZE) {
-            unsigned char *bitmap = (unsigned char *)d.dirty_bitmap;
-            unsigned nr = (phys_addr - mem->start_addr) >> TARGET_PAGE_BITS;
-
-            if (test_le_bit(nr, bitmap)) {
-                cpu_physical_memory_set_dirty(addr);
-            }
-        }
-        start_addr = phys_addr;
+        kvm_get_dirty_pages_log_range_by_long(mem->start_addr, 
+            d.dirty_bitmap, mem->memory_size);
+        start_addr = mem->start_addr + mem->memory_size;
     }
     qemu_free(d.dirty_bitmap);
 
-- 
1.6.3.3 

  reply	other threads:[~2010-02-08 11:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-05 10:18 [PATCH] qemu-kvm: Speed up of the dirty-bitmap-traveling OHMURA Kei
2010-02-05 12:04 ` Jan Kiszka
2010-02-08  6:14   ` OHMURA Kei
2010-02-08 11:23     ` OHMURA Kei [this message]
2010-02-08 11:44       ` Jan Kiszka
2010-02-09  9:55         ` OHMURA Kei
2010-02-08 12:40 ` Avi Kivity
2010-02-09  9:54   ` OHMURA Kei
2010-02-09 10:26     ` Avi Kivity
2010-02-10  9:55       ` OHMURA Kei
2010-02-10 10:24         ` Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B6FF439.6030006@lab.ntt.co.jp \
    --to=ohmura.kei@lab.ntt.co.jp \
    --cc=avi@redhat.com \
    --cc=jan.kiszka@siemens.com \
    --cc=kvm@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.