From: Helmut Auer <vdr@helmutauer.de>
To: linux-media@vger.kernel.org
Subject: [PATCH]Add support for SMT7020 to cx88
Date: Thu, 11 Feb 2010 22:06:34 +0100 [thread overview]
Message-ID: <4B74715A.8010403@helmutauer.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 359 bytes --]
From: Helmut Auer <helmut@helmutauer.de>
This patch (originally written by Dirk Herrendoerfer) adds support for the built-in dvb device
of a Samsung SMT7020s (x86 based STB) to the cx88 family.
(see http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015208.html)
Signed-off-by: Helmut Auer <helmut@helmutauer.de>
--
Helmut Auer, helmut@helmutauer.de
[-- Attachment #2: SMT-dvb.diff --]
[-- Type: text/plain, Size: 7367 bytes --]
diff -r 095b1aec2354 linux/drivers/media/video/cx88/cx88-cards.c
--- a/linux/drivers/media/video/cx88/cx88-cards.c Thu Feb 11 15:43:41 2010 -0200
+++ b/linux/drivers/media/video/cx88/cx88-cards.c Thu Feb 11 22:01:13 2010 +0100
@@ -1499,6 +1499,18 @@
.audioroute = 8,
},
},
+ [CX88_BOARD_SAMSUNG_SMT_7020] = {
+ .name = "Samsung SMT 7020 DVB-S",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
[CX88_BOARD_ADSTECH_PTV_390] = {
.name = "ADS Tech Instant Video PCI",
.tuner_type = TUNER_ABSENT,
@@ -2388,6 +2400,14 @@
.subvendor = 0x0070,
.subdevice = 0x1404,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdc00,
+ .card = CX88_BOARD_SAMSUNG_SMT_7020,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdccd,
+ .card = CX88_BOARD_SAMSUNG_SMT_7020,
},{
.subvendor = 0x1461,
.subdevice = 0xc111, /* AverMedia M150-D */
@@ -2666,6 +2686,9 @@
case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
/* known */
break;
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ cx_set(MO_GP0_IO, 0x008989FF);
+ break;
default:
warn_printk(core, "warning: unknown hauppauge model #%d\n",
tv.model);
diff -r 095b1aec2354 linux/drivers/media/video/cx88/cx88-dvb.c
--- a/linux/drivers/media/video/cx88/cx88-dvb.c Thu Feb 11 15:43:41 2010 -0200
+++ b/linux/drivers/media/video/cx88/cx88-dvb.c Thu Feb 11 22:01:13 2010 +0100
@@ -681,6 +681,194 @@
return 0;
}
+
+
+static u8 samsung_smt_7020_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x0F,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x60,
+
+ 0x0A, 0xC2,
+ 0x0B, 0x00,
+ 0x0C, 0x01,
+ 0x0D, 0x81,
+ 0x0E, 0x44,
+ 0x0F, 0x09,
+ 0x10, 0x3C,
+ 0x11, 0x84,
+ 0x12, 0xDA,
+ 0x13, 0x99,
+ 0x14, 0x8D,
+ 0x15, 0xCE,
+ 0x16, 0xE8,
+ 0x17, 0x43,
+ 0x18, 0x1C,
+ 0x19, 0x1B,
+ 0x1A, 0x1D,
+
+ 0x1C, 0x12,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+
+ 0x28, 0x02,
+ 0x29, 0x28,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFC,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+
+static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = {
+ .addr = 0x61,
+ .flags = 0,
+ .buf = buf,
+ .len = sizeof(buf) };
+
+ div = params->frequency / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x84; /* 0xC4 */
+ buf[3] = 0x00;
+
+ if (params->frequency < 1500000)
+ buf[3] |= 0x10;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int samsung_smt_7020_set_tone(struct dvb_frontend *fe,
+ fe_sec_tone_mode_t tone)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ cx_set(MO_GP0_IO, 0x0800);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ cx_set(MO_GP0_IO, 0x08);
+ break;
+ case SEC_TONE_OFF:
+ cx_clear(MO_GP0_IO, 0x08);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ u8 data;
+ struct i2c_msg msg = {
+ .addr = 8,
+ .flags = 0,
+ .buf = &data,
+ .len = sizeof(data) };
+
+ cx_set(MO_GP0_IO, 0x8000);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ break;
+ case SEC_VOLTAGE_13:
+ data = ISL6421_EN1 | ISL6421_LLC1;
+ cx_clear(MO_GP0_IO, 0x80);
+ break;
+ case SEC_VOLTAGE_18:
+ data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1;
+ cx_clear(MO_GP0_IO, 0x80);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+
+static struct stv0299_config samsung_stv0299_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_smt_7020_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate,
+};
+
static int dvb_register(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
@@ -1210,6 +1398,34 @@
}
break;
}
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ dev->ts_gen_cntrl = 0x08;
+
+ struct cx88_core *core = dev->core;
+
+ cx_set(MO_GP0_IO, 0x0101);
+
+ cx_clear(MO_GP0_IO, 0x01);
+ mdelay(100);
+ cx_set(MO_GP0_IO, 0x01);
+ mdelay(200);
+
+ fe0->dvb.frontend = dvb_attach(stv0299_attach,
+ &samsung_stv0299_config,
+ &dev->core->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.set_params =
+ samsung_smt_7020_tuner_set_params;
+ fe0->dvb.frontend->tuner_priv =
+ &dev->core->i2c_adap;
+ fe0->dvb.frontend->ops.set_voltage =
+ samsung_smt_7020_set_voltage;
+ fe0->dvb.frontend->ops.set_tone =
+ samsung_smt_7020_set_tone;
+ }
+
+ break;
+
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
core->name);
diff -r 095b1aec2354 linux/drivers/media/video/cx88/cx88-mpeg.c
--- a/linux/drivers/media/video/cx88/cx88-mpeg.c Thu Feb 11 15:43:41 2010 -0200
+++ b/linux/drivers/media/video/cx88/cx88-mpeg.c Thu Feb 11 22:01:13 2010 +0100
@@ -123,6 +123,9 @@
case CX88_BOARD_PCHDTV_HD5500:
cx_write(TS_SOP_STAT, 1<<13);
break;
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ cx_write(TS_SOP_STAT, 0x00);
+ break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
cx_write(MO_PINMUX_IO, 0x88); /* Enable MPEG parallel IO and video signal pins */
diff -r 095b1aec2354 linux/drivers/media/video/cx88/cx88.h
--- a/linux/drivers/media/video/cx88/cx88.h Thu Feb 11 15:43:41 2010 -0200
+++ b/linux/drivers/media/video/cx88/cx88.h Thu Feb 11 22:01:13 2010 +0100
@@ -240,6 +240,7 @@
#define CX88_BOARD_WINFAST_DTV1800H 81
#define CX88_BOARD_WINFAST_DTV2000H_J 82
#define CX88_BOARD_PROF_7301 83
+#define CX88_BOARD_SAMSUNG_SMT_7020 84
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
next reply other threads:[~2010-02-11 21:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-11 21:06 Helmut Auer [this message]
2010-02-12 20:27 ` [PATCH]Add support for SMT7020 to cx88 Helmut Auer
2010-02-14 18:26 ` Helmut Auer
2010-02-14 20:46 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B74715A.8010403@helmutauer.de \
--to=vdr@helmutauer.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.