From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "istvan_v@mailbox.hu" <istvan_v@mailbox.hu>
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH] DTV2000 H Plus issues
Date: Wed, 17 Feb 2010 21:51:17 -0200 [thread overview]
Message-ID: <4B7C80F5.5060405@redhat.com> (raw)
In-Reply-To: <4B7C303B.2040807@mailbox.hu>
Hi Istvan,
istvan_v@mailbox.hu wrote:
> The attached new patches contain all the previous changes merged, and
> are against the latest v4l-dvb revision.
Please provide your Signed-off-by. This is a basic requirement for your
driver to be accepted. Please read:
http://linuxtv.org/hg/v4l-dvb/raw-file/tip/README.patches
for instructions on how to submit a patch.
Cheers,
Mauro.
>
> By the way, someone on a forum reported having a DTV1800 H card with
> a PCI ID of 107d:6f38. This seems to differ from the already supported
> DTV1800 H version (107d:6654) by having an XC4000 tuner instead of
> XC3028. From the Windows INF files it seems this card is very similar
> to the DTV2000 H Plus, but there is no GPIO for selecting antenna/cable
> input.
>
> On 02/11/2010 08:16 PM, istvan_v@mailbox.hu wrote:
>
>> Update: the following patch, which should be applied after the previous
>> ones, makes a few additional changes to the XC4000 driver:
>> - adds support for DTV7
>> - implements power management
>> - adds a mutex and locking for tuner operations
>> - some unused or unneeded code has been removed
>>
>> On 02/09/2010 06:35 PM, istvan_v@mailbox.hu wrote:
>>
>>> There are two separate patches for v4l-dvb revision 28f5eca12bb0: the
>>> first one adds the XC4000 driver, while the second one adds support for
>>> the Leadtek WinFast DTV2000H Plus card in the CX88 driver.
>>>
>>> http://www.sharemation.com/IstvanV/v4l/xc4000-28f5eca12bb0.patch
>>> http://www.sharemation.com/IstvanV/v4l/cx88-dtv2000h+-28f5eca12bb0.patch
>>>
>>> These new firmware files are more complete than the previous ones, but
>>> are not compatible with the original driver. Both version 1.2 and 1.4
>>> are available:
>>>
>>> http://www.sharemation.com/IstvanV/v4l/xc4000-1.2.fw
>>> http://www.sharemation.com/IstvanV/v4l/xc4000-1.4.fw
>>>
>>> The following simple utility was used for creating the firmware files.
>>>
>>> http://www.sharemation.com/IstvanV/v4l/xc4000fw.c
--
Cheers,
Mauro
next prev parent reply other threads:[~2010-02-17 23:51 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-02 16:10 DTV2000 H Plus issues Raena Lea-Shannon
2010-01-02 16:57 ` istvan_v
2010-01-03 8:21 ` Raena Lea-Shannon
2010-01-03 11:31 ` Samuel Rakitnican
2010-01-04 13:01 ` Raena Lea-Shannon
2010-01-04 16:48 ` istvan_v
2010-01-05 1:25 ` Raena Lea-Shannon
2010-01-07 19:49 ` istvan_v
2010-01-07 20:00 ` Devin Heitmueller
2010-01-07 21:07 ` istvan_v
2010-02-09 17:35 ` istvan_v
2010-02-11 19:16 ` istvan_v
2010-02-11 19:21 ` Devin Heitmueller
2010-02-11 19:35 ` istvan_v
2010-02-12 18:26 ` istvan_v
2010-02-12 18:34 ` istvan_v
2010-02-17 18:06 ` [PATCH] " istvan_v
2010-02-17 23:51 ` Mauro Carvalho Chehab [this message]
2010-02-17 23:59 ` Devin Heitmueller
2010-02-18 0:08 ` Mauro Carvalho Chehab
2010-02-18 0:11 ` Devin Heitmueller
2010-03-14 17:58 ` istvan_v
2010-03-15 4:15 ` Devin Heitmueller
2010-03-16 18:24 ` istvan_v
2010-03-22 18:33 ` istvan_v
2010-03-24 11:38 ` istvan_v
2010-03-14 17:50 ` istvan_v
2010-02-19 19:54 ` istvan_v
2010-03-10 23:17 ` istvan_v
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B7C80F5.5060405@redhat.com \
--to=mchehab@redhat.com \
--cc=istvan_v@mailbox.hu \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.