All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anthony Liguori <anthony@codemonkey.ws>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org, Juan Quintela <quintela@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] ide save/restore pio/atapi cmd transfer fields and io buffer
Date: Fri, 19 Feb 2010 15:47:16 -0600	[thread overview]
Message-ID: <4B7F06E4.2080601@codemonkey.ws> (raw)
In-Reply-To: <20100211201944.GA25584@amt.cnet>

On 02/11/2010 02:19 PM, Marcelo Tosatti wrote:
> Save/restore information necessary to continue in progress PIO/ATAPI CMD
> transfers.
>
> This includes the IO buffer.
>
> Signed-off-by: Marcelo Tosatti<mtosatti@redhat.com>
>    

Applied.  Thanks.

Regards,

Anthony Liguori

> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index b6643e8..64aebc2 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -2640,6 +2640,7 @@ void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1,
>           s->unit = i;
>           s->drive_serial = drive_serial++;
>           s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
> +        s->io_buffer_total_len = IDE_DMA_BUF_SECTORS*512 + 4;
>           s->smart_selftest_data = qemu_blockalign(s->bs, 512);
>           s->sector_write_timer = qemu_new_timer(vm_clock,
>                                                  ide_sector_write_timer_cb, s);
> @@ -2674,6 +2675,25 @@ static bool is_identify_set(void *opaque, int version_id)
>       return s->identify_set != 0;
>   }
>
> +static EndTransferFunc* transfer_end_table[] = {
> +        ide_sector_read,
> +        ide_sector_write,
> +        ide_transfer_stop,
> +        ide_atapi_cmd_reply_end,
> +        ide_atapi_cmd,
> +};
> +
> +static int transfer_end_table_idx(EndTransferFunc *fn)
> +{
> +    int i;
> +
> +    for (i = 0; i<  ARRAY_SIZE(transfer_end_table); i++)
> +        if (transfer_end_table[i] == fn)
> +            return i;
> +
> +    return -1;
> +}
> +
>   static int ide_drive_post_load(void *opaque, int version_id)
>   {
>       IDEState *s = opaque;
> @@ -2684,14 +2704,42 @@ static int ide_drive_post_load(void *opaque, int version_id)
>               s->cdrom_changed = 1;
>           }
>       }
> +
> +    if (s->cur_io_buffer_len) {
> +        s->end_transfer_func = transfer_end_table[s->end_transfer_fn_idx];
> +        s->data_ptr = s->io_buffer + s->cur_io_buffer_offset;
> +        s->data_end = s->data_ptr + s->cur_io_buffer_len;
> +    }
> +
>       return 0;
>   }
>
> +static void ide_drive_pre_save(void *opaque)
> +{
> +    IDEState *s = opaque;
> +
> +    s->cur_io_buffer_len = 0;
> +
> +    if (!(s->status&  DRQ_STAT))
> +        return;
> +
> +    s->cur_io_buffer_offset = s->data_ptr - s->io_buffer;
> +    s->cur_io_buffer_len = s->data_end - s->data_ptr;
> +
> +    s->end_transfer_fn_idx = transfer_end_table_idx(s->end_transfer_func);
> +    if (s->end_transfer_fn_idx == -1) {
> +        fprintf(stderr, "%s: invalid end_transfer_func for DRQ_STAT\n",
> +                        __func__);
> +        s->end_transfer_fn_idx = 2;
> +    }
> +}
> +
>   const VMStateDescription vmstate_ide_drive = {
>       .name = "ide_drive",
> -    .version_id = 3,
> +    .version_id = 4,
>       .minimum_version_id = 0,
>       .minimum_version_id_old = 0,
> +    .pre_save = ide_drive_pre_save,
>       .post_load = ide_drive_post_load,
>       .fields      = (VMStateField []) {
>           VMSTATE_INT32(mult_sectors, IDEState),
> @@ -2714,7 +2762,14 @@ const VMStateDescription vmstate_ide_drive = {
>           VMSTATE_UINT8(sense_key, IDEState),
>           VMSTATE_UINT8(asc, IDEState),
>           VMSTATE_UINT8_V(cdrom_changed, IDEState, 3),
> -        /* XXX: if a transfer is pending, we do not save it yet */
> +        VMSTATE_INT32_V(req_nb_sectors, IDEState, 4),
> +        VMSTATE_VARRAY_INT32(io_buffer, IDEState, io_buffer_total_len, 4,
> +			     vmstate_info_uint8, uint8_t),
> +        VMSTATE_INT32_V(cur_io_buffer_offset, IDEState, 4),
> +        VMSTATE_INT32_V(cur_io_buffer_len, IDEState, 4),
> +        VMSTATE_UINT8_V(end_transfer_fn_idx, IDEState, 4),
> +        VMSTATE_INT32_V(elementary_transfer_size, IDEState, 4),
> +        VMSTATE_INT32_V(packet_transfer_size, IDEState, 4),
>           VMSTATE_END_OF_LIST()
>       }
>   };
> diff --git a/hw/ide/internal.h b/hw/ide/internal.h
> index 1cc4b55..8615d1a 100644
> --- a/hw/ide/internal.h
> +++ b/hw/ide/internal.h
> @@ -417,6 +417,11 @@ struct IDEState {
>       uint8_t *data_ptr;
>       uint8_t *data_end;
>       uint8_t *io_buffer;
> +    /* PIO save/restore */
> +    int32_t io_buffer_total_len;
> +    int cur_io_buffer_offset;
> +    int cur_io_buffer_len;
> +    uint8_t end_transfer_fn_idx;
>       QEMUTimer *sector_write_timer; /* only used for win2k install hack */
>       uint32_t irq_count; /* counts IRQs when using win2k install hack */
>       /* CF-ATA extended error */
>
>
>
>    

      reply	other threads:[~2010-02-19 21:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-11 20:19 [Qemu-devel] [PATCH] ide save/restore pio/atapi cmd transfer fields and io buffer Marcelo Tosatti
2010-02-19 21:47 ` Anthony Liguori [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B7F06E4.2080601@codemonkey.ws \
    --to=anthony@codemonkey.ws \
    --cc=mtosatti@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.