All of lore.kernel.org
 help / color / mirror / Atom feed
From: Achim Ehrlich <aehrlich@taskit.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] AT91: Added support for taskit Stamp9G20 and PortuxG20
Date: Mon, 22 Feb 2010 13:35:58 +0100	[thread overview]
Message-ID: <4B827A2E.5000200@taskit.de> (raw)
In-Reply-To: <m2r5oibtqt.fsf@ohwell.denx.de>

Hello Detlef,

>> Signed-off-by: Achim Ehrlich <aehrlich@taskit.de>
>> ---
>>  Makefile                           |    9 ++
>>  board/taskit/stamp9G20/Makefile    |   56 ++++++++++
>>  board/taskit/stamp9G20/config.mk   |    1 +
>>  board/taskit/stamp9G20/led.c       |   35 ++++++
>>  board/taskit/stamp9G20/partition.c |   40 +++++++
>>  board/taskit/stamp9G20/stamp9G20.c |  200 ++++++++++++++++++++++++++++++++++++
>>  include/configs/stamp9G20.h        |  197 +++++++++++++++++++++++++++++++++++
>>  7 files changed, 538 insertions(+), 0 deletions(-)
>>  create mode 100644 board/taskit/stamp9G20/Makefile
>>  create mode 100644 board/taskit/stamp9G20/config.mk
>>  create mode 100644 board/taskit/stamp9G20/led.c
>>  create mode 100644 board/taskit/stamp9G20/partition.c
>>  create mode 100644 board/taskit/stamp9G20/stamp9G20.c
>>  create mode 100644 include/configs/stamp9G20.h
>>
>> diff --git a/Makefile b/Makefile
>> index 524b9da..ef1a7d4 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -2906,6 +2906,15 @@ TNY_A9260_config	:	unconfig
>>  	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
>>  	@$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
>>  
>> +portuxG20_config \
>> +stamp9G20_config	:	unconfig
>> +	@mkdir -p $(obj)include
>> +	@if [ "$(findstring portux,$@)" ] ; then \
>> +		echo "#define CONFIG_PORTUXG20 1" >$(obj)include/config.h; \
>> +		$(XECHO) "... PortuxG20";\
>> +	fi;
>> +	@$(MKCONFIG) -a stamp9G20 arm arm926ejs stamp9G20 taskit at91
>> +
>>  ########################################################################
>>  ## ARM Integrator boards - see doc/README-integrator for more info.
>>  integratorap_config	\
>> diff --git a/board/taskit/stamp9G20/Makefile b/board/taskit/stamp9G20/Makefile
>> new file mode 100644
>> index 0000000..ef82428
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/Makefile
>> @@ -0,0 +1,56 @@
>> +#
>> +# (C) Copyright 2003-2008
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> +#
>> +# (C) Copyright 2008
>> +# Stelian Pop <stelian.pop@leadtechdesign.com>
>> +# Lead Tech Design <www.leadtechdesign.com>
> 
> Well actually I am not a fan of including all these copyrights in a file
> which has so little content - so I'd vote to remove them and include
> your own copyright.
> 
> But if for some reason the copyrights are not removed, then please at
> least add yourself in.
> 
> 
> [...]

OK.

> 
>> diff --git a/board/taskit/stamp9G20/led.c b/board/taskit/stamp9G20/led.c
>> new file mode 100644
>> index 0000000..dc6ac63
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/led.c
>> @@ -0,0 +1,35 @@
>> +/*
>> + * (C) Copyright 2007-2008
>> + * Stelian Pop <stelian.pop@leadtechdesign.com>
>> + * Lead Tech Design <www.leadtechdesign.com>
> 
> Dito.

I haven't changed one bit in this file, I really do not feel like even adding my 
copyright.

> 
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/arch/at91sam9260.h>
>> +#include <asm/arch/at91_pmc.h>
>> +#include <asm/arch/gpio.h>
>> +#include <asm/arch/io.h>
>> +
>> +void coloured_LED_init(void)
>> +{
>> +	/* Enable clock */
>> +	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
>> +}
>> diff --git a/board/taskit/stamp9G20/partition.c b/board/taskit/stamp9G20/partition.c
>> new file mode 100644
>> index 0000000..2629c67
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/partition.c
>> @@ -0,0 +1,40 @@
>> +/*
>> + * (C) Copyright 2008
>> + * Ulf Samuelsson <ulf@atmel.com>
> 
> Dito.
> 
>> diff --git a/board/taskit/stamp9G20/stamp9G20.c b/board/taskit/stamp9G20/stamp9G20.c
>> new file mode 100644
>> index 0000000..28cd8b1
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/stamp9G20.c
>> @@ -0,0 +1,200 @@
>> +/*
>> + * (C) Copyright 2007-2008
>> + * Stelian Pop <stelian.pop@leadtechdesign.com>
>> + * Lead Tech Design <www.leadtechdesign.com>
>> + *
>> + * Achim Ehrlich <aehrlich@taskit.de>
>> + * taskit GmbH <www.taskit.de>
> 
> Ok, this time you added your name - although I would have expected a
> year.
> 

Hmm, right.
 
Kind regards

Achim 

-- 
product manager

email:aehrlich at taskit.de 
Tel.: ++49 30 611295-25
Fax: ++49 30 611295-11

--
taskit GmbH
Seelenbinderstr. 33 | D-12555 Berlin
web:http://www.taskit.de
Amtsgericht Charlottenburg: 93HRB39014
Managing director: Thorsten Raulfs
--

  reply	other threads:[~2010-02-22 12:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-17 16:10 [U-Boot] [PATCH] AT91: Added support for taskit Stamp9G20 and PortuxG20 Achim Ehrlich
2010-02-18 12:32 ` Wolfgang Denk
2010-02-22 12:31   ` Achim Ehrlich
2010-02-22 13:06     ` Wolfgang Denk
2010-02-18 12:42 ` Detlev Zundel
2010-02-22 12:35   ` Achim Ehrlich [this message]
2010-02-22 13:04     ` Detlev Zundel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B827A2E.5000200@taskit.de \
    --to=aehrlich@taskit.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.