ipw2100 crash with latest git

["Daniele C." <legolas558@users.sourceforge.net>]

[-- Attachment #1: Type: text/plain, Size: 2097 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi all,

my raw sensation is that ipw2100 is more unstable in 2.6.33 than in 2.6.32.

Today I got an ipw2100 crash without doing anything illegal; see attached dmesg.

Also I find these messages in /var/log/messages.log:

- --->8-----
Feb 24 21:53:20 fester kernel: ipw2100: exit - failed to send CARD_DISABLE command
Feb 24 21:53:20 fester kernel: ipw2100: exit - failed to send CARD_DISABLE command
Feb 24 21:54:16 fester kernel: ipw2100: Fatal interrupt. Scheduling firmware restart.
Feb 24 21:56:47 fester kernel: ipw2100: exit - failed to send CARD_DISABLE command
Feb 24 21:58:51 fester kernel: ipw2100: exit - failed to send CARD_DISABLE command
Feb 24 22:07:11 fester kernel: ipw2100: exit - failed to send CARD_DISABLE command
Feb 24 22:09:57 fester kernel: ipw2100: Fatal interrupt. Scheduling firmware restart.
Feb 24 22:11:09 fester acpid: client 3208[0:100] has disconnected
Feb 24 22:11:09 fester acpid: client connected from 3208[0:100]
Feb 24 22:11:09 fester acpid: 1 client rule loaded
Feb 24 22:28:49 fester kernel: ipw2100: Fatal interrupt. Scheduling firmware restart.
- --->8-----

This is weird; something is clearly not working OK. However there is to say that the above messages are present with stable 2.6.32 as well with latest 2.6.33, but I got crash only with the linus git version.

Note: my kernel sources are patched with the BFS scheduler, I suppose that does not invalidate the results of my findings regarding this ipw2100 crash

Best regards,
- --
  Daniele C.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJLhZuyAAoJEON28As9epPAyLUH/RDpleeV0KCpYbRxRAYX1C33
OUz063Dgi5Llb4uW5tqtt31oerrKqV9o/oiJ3yQ7aKxVioJ0cnuUDAM+EOgtBoql
fVTJJxG1mY70DJwOuYkhXsxmz/Eln2Qk/lEept5/lOm0SNgQHlcbqWOV/gCNbBMn
hnY5TnQy9vFG+fD2Ui07z5Zl/r6gtXDb+WQk0vyjYY35v/eWPut9UYhT4oE8avxp
/H+cp1KA/JN6jzWJ8m2/rxLSmQUrJgHfUs7oTZVKfAWXuS8Q3AW4C+WHolOMXMkp
do2cv0IX3tOOUHRf5xwk4naNoIBfSDxbLRTrLlfcDvYMxIOtUmZj8z/M8Qia//E=
=e3ql
-----END PGP SIGNATURE-----

[-- Attachment #2: ipw_crash.log --]
[-- Type: text/plain, Size: 38259 bytes --]

[    0.000000] Linux version 2.6.33-rc8-DBUG-00204-gbe64c97-dirty (legolas558@fester) (gcc version 4.4.3 (GCC) ) #44 PREEMPT Wed Feb 24 05:25:16 CET 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[    0.000000]  BIOS-e820: 000000001f6e0000 - 000000001f6eb000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001f6eb000 - 000000001f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x1f6e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 01FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-000000001f6e0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001f400000 page 2M
[    0.000000]  001f400000 - 001f6e0000 page 4k
[    0.000000] kernel direct mapping tables up to 1f6e0000 @ 14000-19000
[    0.000000] RAMDISK: 1f69f000 - 1f6cf19c
[    0.000000] ACPI: RSDP 000f6700 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 1f6e6557 00030 (v01 PTLTD  Montara  06040000  LTP 00000000)
[    0.000000] ACPI: FACP 1f6eaed2 00074 (v01 INTEL  MONTARAG 06040000 PTL  00000050)
[    0.000000] ACPI: DSDT 1f6e6a68 0446A (v01 INTEL  MONTARAG 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1f6fbfc0 00040
[    0.000000] ACPI: BOOT 1f6eafd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 1f6e6587 004D9 (v01 INTEL    GV3Ref 00001001 MSFT 0100000E)
[    0.000000] 502MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1f6e0000
[    0.000000]   low ram: 0 - 1f6e0000
[    0.000000]   node 0 low ram: 00000000 - 1f6e0000
[    0.000000]   node 0 bootmap 00015000 - 00018edc
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 001f6e0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0001000000 - 0001620f74]    TEXT DATA BSS ==> [0001000000 - 0001620f74]
[    0.000000]   #2 [001f69f000 - 001f6cf19c]          RAMDISK ==> [001f69f000 - 001f6cf19c]
[    0.000000]   #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #4 [0001621000 - 000162718c]              BRK ==> [0001621000 - 000162718c]
[    0.000000]   #5 [0000010000 - 0000014000]      ACPI WAKEUP ==> [0000010000 - 0000014000]
[    0.000000]   #6 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
[    0.000000]   #7 [0000015000 - 0000019000]          BOOTMAP ==> [0000015000 - 0000019000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001f6e0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001f6e0
[    0.000000] On node 0 totalpages: 128623
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 974 pages used for memmap
[    0.000000]   Normal zone: 123666 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Local APIC disabled by BIOS -- reenabling.
[    0.000000] Found and enabled local APIC!
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec10000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127617
[    0.000000] Kernel command line: resume=/dev/disk/by-label/SWAP1 root=/dev/disk/by-label/LINUX ro lapic=yes hpet=force clocksource=hpet i8042.nomux=1 nomodeset vga=0xF07
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 503208k/514944k available (3841k kernel code, 11020k reserved, 1702k data, 344k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
[    0.000000]     vmalloc : 0xdfee0000 - 0xfffa2000   ( 512 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf6e0000   ( 502 MB)
[    0.000000]       .init : 0xc156a000 - 0xc15c0000   ( 344 kB)
[    0.000000]       .data : 0xc13c0541 - 0xc1569e04   (1702 kB)
[    0.000000]       .text : 0xc1000000 - 0xc13c0541   (3841 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:288
[    0.000000] Console: colour VGA+ 80x60
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1599.796 MHz processor.
[    0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.59 BogoMIPS (lpj=1599796)
[    0.002148] Mount-cache hash table entries: 512
[    0.002367] mce: CPU supports 5 MCE banks
[    0.002467] CPU0: Thermal monitoring enabled (TM2)
[    0.002568] Performance Events: p6 PMU driver.
[    0.002710] ... version:                0
[    0.002803] ... bit width:              32
[    0.002894] ... generic registers:      2
[    0.003002] ... value mask:             00000000ffffffff
[    0.003096] ... max period:             000000007fffffff
[    0.003191] ... fixed-purpose events:   0
[    0.003282] ... event mask:             0000000000000003
[    0.003376] CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
[    0.003558] Checking 'hlt' instruction... OK.
[    0.007767] ACPI: Core revision 20091214
[    0.018460] ACPI: setting ELCR to 0200 (from 0c00)
[    0.019124] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.019999] NET: Registered protocol family 16
[    0.019999] ACPI: bus type pci registered
[    0.021388] PCI: PCI BIOS revision 2.10 entry at 0xfd6c4, last bus=3
[    0.021485] PCI: Using configuration type 1 for base access
[    0.023204] bio: create slab <bio-0> at 0
[    0.024085] ACPI: EC: Look up EC in DSDT
[    0.027205] ACPI: Interpreter enabled
[    0.027307] ACPI: (supports S0 S3 S4 S5)
[    0.027584] ACPI: Using PIC for interrupt routing
[    0.433206] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.434265] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.434403] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[    0.436154] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.436158] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.436162] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.436166] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.436170] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.436174] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.436283] pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[    0.436289] pci 0000:00:02.0: reg 14: [mem 0xe0000000-0xe007ffff]
[    0.436294] pci 0000:00:02.0: reg 18: [io  0x1800-0x1807]
[    0.436312] pci 0000:00:02.0: supports D1
[    0.436329] pci 0000:00:02.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.436334] pci 0000:00:02.1: reg 14: [mem 0xe0080000-0xe00fffff]
[    0.436354] pci 0000:00:02.1: supports D1
[    0.436416] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.436461] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.436506] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.436552] pci 0000:00:1d.7: reg 10: [mem 0xe0100000-0xe01003ff]
[    0.436602] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.436608] pci 0000:00:1d.7: PME# disabled
[    0.436682] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.436689] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.436832] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.436947] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.436954] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.436961] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.436967] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.436974] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
[    0.436981] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.437027] pci 0000:00:1f.3: reg 20: [io  0x1880-0x189f]
[    0.437061] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.437068] pci 0000:00:1f.5: reg 14: [io  0x18c0-0x18ff]
[    0.437074] pci 0000:00:1f.5: reg 18: [mem 0xe0100c00-0xe0100dff]
[    0.437081] pci 0000:00:1f.5: reg 1c: [mem 0xe0100800-0xe01008ff]
[    0.437106] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.437110] pci 0000:00:1f.5: PME# disabled
[    0.437132] pci 0000:00:1f.6: reg 10: [io  0x2400-0x24ff]
[    0.437139] pci 0000:00:1f.6: reg 14: [io  0x2000-0x207f]
[    0.437171] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.437175] pci 0000:00:1f.6: PME# disabled
[    0.437207] pci 0000:02:03.0: reg 10: [mem 0xe0202000-0xe0202fff]
[    0.437244] pci 0000:02:03.0: supports D1 D2
[    0.437246] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot
[    0.437250] pci 0000:02:03.0: PME# disabled
[    0.437274] pci 0000:02:05.0: reg 10: [mem 0xe0200000-0xe0201fff]
[    0.437297] pci 0000:02:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.437312] pci 0000:02:05.0: supports D1 D2
[    0.437315] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437319] pci 0000:02:05.0: PME# disabled
[    0.437343] pci 0000:02:06.0: reg 10: [mem 0xe0203000-0xe0203fff]
[    0.437405] pci 0000:02:09.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.437422] pci 0000:02:09.0: supports D1 D2
[    0.437424] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437429] pci 0000:02:09.0: PME# disabled
[    0.437455] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.437558] pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
[    0.437576] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[    0.437727] pci_bus 0000:00: on NUMA node 0
[    0.437732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.437941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.443444] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[    0.443813] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
[    0.444108] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[    0.444472] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[    0.444794] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
[    0.445232] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[    0.445600] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
[    0.445968] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[    0.446365] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.446514] vgaarb: loaded
[    0.446770] usbcore: registered new interface driver usbfs
[    0.446900] usbcore: registered new interface driver hub
[    0.447040] usbcore: registered new device driver usb
[    0.447331] Advanced Linux Sound Architecture Driver Version 1.0.21.
[    0.447429] PCI: Using ACPI for IRQ routing
[    0.447549] PCI: pci_cache_line_size set to 64 bytes
[    0.447933] hpet clockevent registered
[    0.447939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.448209] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.450002] Switching to clocksource hpet
[    0.451837] pnp: PnP ACPI init
[    0.451942] ACPI: bus type pnp registered
[    0.655404] pnp: PnP ACPI: found 11 devices
[    0.655498] ACPI: ACPI bus type pnp unregistered
[    0.655609] system 00:04: [io  0x0600-0x060f] has been reserved
[    0.655706] system 00:04: [io  0x0700-0x070f] has been reserved
[    0.655804] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.655901] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.655998] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.656103] system 00:04: [mem 0xfec10000-0xfec1ffff] has been reserved
[    0.691153] pci 0000:00:1e.0: BAR 9: assigned [mem 0x20000000-0x25ffffff pref]
[    0.691296] pci 0000:00:1e.0: BAR 7: assigned [io  0x3000-0x3fff]
[    0.691394] pci 0000:00:1f.1: BAR 5: assigned [mem 0x26000000-0x260003ff]
[    0.691496] pci 0000:00:1f.1: BAR 5: set to [mem 0x26000000-0x260003ff] (PCI address [0x26000000-0x260003ff]
[    0.691645] pci 0000:02:09.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref]
[    0.691787] pci 0000:02:09.0: BAR 10: assigned [mem 0x28000000-0x2bffffff]
[    0.691887] pci 0000:02:05.0: BAR 6: assigned [mem 0x24000000-0x2400ffff pref]
[    0.692034] pci 0000:02:09.0: BAR 0: assigned [mem 0xe0204000-0xe0204fff]
[    0.692134] pci 0000:02:09.0: BAR 0: set to [mem 0xe0204000-0xe0204fff] (PCI address [0xe0204000-0xe0204fff]
[    0.692281] pci 0000:02:09.0: BAR 7: assigned [io  0x3000-0x30ff]
[    0.692378] pci 0000:02:09.0: BAR 8: assigned [io  0x3400-0x34ff]
[    0.692475] pci 0000:02:09.0: CardBus bridge to [bus 03-06]
[    0.692571] pci 0000:02:09.0:   bridge window [io  0x3000-0x30ff]
[    0.692669] pci 0000:02:09.0:   bridge window [io  0x3400-0x34ff]
[    0.692768] pci 0000:02:09.0:   bridge window [mem 0x20000000-0x23ffffff pref]
[    0.692912] pci 0000:02:09.0:   bridge window [mem 0x28000000-0x2bffffff]
[    0.693016] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.693112] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.693212] pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
[    0.693311] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x25ffffff pref]
[    0.693459] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[    0.693560] pci 0000:00:1e.0: setting latency timer to 64
[    0.693744] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[    0.693841] PCI: setting IRQ 10 as level-triggered
[    0.693847] pci 0000:02:09.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
[    0.693993] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.693996] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.694000] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.694008] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff]
[    0.694012] pci_bus 0000:02: resource 2 [mem 0x20000000-0x25ffffff pref]
[    0.694015] pci_bus 0000:02: resource 3 [io  0x0000-0xffff]
[    0.694018] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
[    0.694022] pci_bus 0000:03: resource 0 [io  0x3000-0x30ff]
[    0.694025] pci_bus 0000:03: resource 1 [io  0x3400-0x34ff]
[    0.694028] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[    0.694031] pci_bus 0000:03: resource 3 [mem 0x28000000-0x2bffffff]
[    0.694054] NET: Registered protocol family 2
[    0.696497] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.696676] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.696949] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.697120] TCP: Hash tables configured (established 16384 bind 16384)
[    0.697217] TCP reno registered
[    0.697309] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.697412] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.697547] NET: Registered protocol family 1
[    0.697658] pci 0000:00:02.0: Boot video device
[    0.697741] PCI: CLS 64 bytes, default 64
[    0.697797] Unpacking initramfs...
[    0.770579] Freeing initrd memory: 192k freed
[    0.771091] Simple Boot Flag at 0x36 set to 0x1
[    0.778973] Slow work thread pool: Starting up
[    0.779097] Slow work thread pool: Ready
[    0.779243] msgmni has been set to 983
[    0.780456] alg: No test for stdrng (krng)
[    0.780571] io scheduler noop registered
[    0.780664] io scheduler deadline registered
[    0.780882] io scheduler cfq registered (default)
[    0.781313] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.781575] ACPI: Lid Switch [LID]
[    0.781746] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.781891] ACPI: Sleep Button [SLP2]
[    0.782090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.782232] ACPI: Power Button [PWRF]
[    0.782763] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
[    0.782910] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.821797] Real Time Clock Driver v1.12b
[    0.822029] intel_rng: FWH not detected
[    0.822123] Linux agpgart interface v0.103
[    0.822239] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    0.823068] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[    0.825144] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[    0.825361] [drm] Initialized drm 1.1.0 20060810
[    0.825717] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.825814] PCI: setting IRQ 11 as level-triggered
[    0.825820] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.825966] pci 0000:00:02.0: setting latency timer to 64
[    0.830562] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.830826] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.831384] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.832294] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    0.832393] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    0.832541] serial 0000:00:1f.6: PCI INT B disabled
[    0.832683] Uniform Multi-Platform E-IDE driver
[    0.832870] piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
[    0.832971] pci 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.833239] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.833336] pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.833499] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[    0.833602]     ide0: BM-DMA at 0x1810-0x1817
[    0.833704]     ide1: BM-DMA at 0x1818-0x181f
[    0.833801] Probing IDE interface ide0...
[    1.097140] hda: WDC WD1600BEVE-00UYT0, ATA DISK drive
[    1.709070] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    1.709137] hda: UDMA/100 mode selected
[    1.709293] Probing IDE interface ide1...
[    2.381138] hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
[    2.993062] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    2.993155] hdc: UDMA/33 mode selected
[    2.993406] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.044738] ide1 at 0x170-0x177,0x376 on irq 15
[    3.045378] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    3.045525] ide-gd driver 1.18
[    3.045638] hda: max request size: 512KiB
[    3.045902] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[    3.046247] hda: cache flushes supported
[    3.046380]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
[    3.117161] ide-cd driver 5.00
[    3.118511] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[    3.118814] Uniform CD-ROM driver Revision: 3.20
[    3.122323] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    3.122420] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.122751] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[    3.122848] b44 0000:02:05.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
[    3.131031] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[    3.131037] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[    3.131043] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[    3.150091] ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
[    3.150224] b44.c:v2.0
[    3.158209] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0a:e4:21:a0:f0
[    3.158617] usbcore: registered new interface driver libusual
[    3.158798] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.161539] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.161638] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.161959] mice: PS/2 mouse device common for all mice
[    3.162494] wistron_btns: BIOS signature found at c00f6670, entry point 000FDD00
[    3.163604] input: Wistron laptop buttons as /devices/platform/wistron-bios/input/input4
[    3.163895] cpuidle: using governor ladder
[    3.163987] cpuidle: using governor menu
[    3.164156] ALSA device list:
[    3.164247]   No soundcards found.
[    3.164466] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.164864] NET: Registered protocol family 10
[    3.165169] IPv6 over IPv4 tunneling driver
[    3.165396] NET: Registered protocol family 17
[    3.165556] Using IPI Shortcut mode
[    3.191573] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    3.191794] registered taskstats version 1
[    3.192139] Initalizing network drop monitor service
[    3.192258] Freeing unused kernel memory: 344k freed
[    3.192577] BFS CPU scheduler v0.314 by Con Kolivas.
[    3.883110] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
[    3.919098] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    4.158027] PM: Starting manual resume from disk
[    4.170590] PM: Starting manual resume from disk
[    4.171911] modprobe: FATAL: Could not load /lib/modules/2.6.33-rc8-DBUG-00204-gbe64c97-dirty/modules.dep: No such file or directory
[    4.172388] modprobe: FATAL: Could not load /lib/modules/2.6.33-rc8-DBUG-00204-gbe64c97-dirty/modules.dep: No such file or directory
[    4.193358] kjournald starting.  Commit interval 5 seconds
[    4.193462] EXT3-fs (hda6): mounted filesystem with writeback data mode
[    6.079713] udev: starting version 151
[    8.239199] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    8.239233] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.289892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.290593] snd_intel8x0m: `false' invalid for parameter `enable'
[    8.790699] Marking TSC unstable due to TSC halts in idle
[    8.957397] uhci_hcd: USB Universal Host Controller Interface driver
[    8.964841] thermal LNXTHERM:01: registered as thermal_zone0
[    8.964854] ACPI: Thermal Zone [THRS] (33 C)
[    9.065356] ACPI: AC Adapter [AC] (on-line)
[    9.074667] ohci1394 0000:02:03.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
[    9.076774] thermal LNXTHERM:02: registered as thermal_zone1
[    9.076789] ACPI: Thermal Zone [THRC] (23 C)
[    9.127089] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[e0202000-e02027ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    9.479434] ACPI: Battery Slot [BAT0] (battery absent)
[    9.516025] intel8x0_measure_ac97_clock: measured 50523 usecs (2435 samples)
[    9.516031] intel8x0: clocking to 48000
[    9.517824] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    9.517831] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    9.517872] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    9.517877] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    9.517969] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    9.518015] ehci_hcd 0000:00:1d.7: debug port 1
[    9.521900] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    9.521916] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
[    9.549033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    9.549397] hub 1-0:1.0: USB hub found
[    9.549404] hub 1-0:1.0: 6 ports detected
[    9.549666] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    9.549680] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    9.549685] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.549754] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    9.549788] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[    9.549938] hub 2-0:1.0: USB hub found
[    9.549943] hub 2-0:1.0: 2 ports detected
[    9.550250] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    9.550255] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    9.550262] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    9.550266] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.550323] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    9.550347] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[    9.550498] hub 3-0:1.0: USB hub found
[    9.550502] hub 3-0:1.0: 2 ports detected
[    9.550552] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    9.550559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    9.550562] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.550616] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    9.550639] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[    9.550794] hub 4-0:1.0: USB hub found
[    9.550799] hub 4-0:1.0: 2 ports detected
[   10.018410] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   10.018414] wbsd: Copyright(c) Pierre Ossman
[   10.055457] mmc0: W83L51xD id 7112 at 0x820 irq 6 FIFO PnP
[   10.226063] NET: Registered protocol family 23
[   10.230343] nsc-ircc, chip->init
[   10.230353] nsc-ircc, Found chip at base=0x02e
[   10.230378] nsc-ircc, driver loaded (Dag Brattli)
[   10.230385] nsc_ircc_open(), can't get iobase of 0x2f8
[   10.230413] nsc-ircc, Found chip at base=0x02e
[   10.230437] nsc-ircc, driver loaded (Dag Brattli)
[   10.230440] nsc_ircc_open(), can't get iobase of 0x2f8
[   10.230706] nsc-ircc 00:08: disabled
[   10.480931] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[03e40a009c002042]
[   11.452091] EXT3-fs (hda6): using internal journal
[   11.792789] REISERFS (device hda7): found reiserfs format "3.6" with standard journal
[   11.792827] REISERFS (device hda7): using ordered data mode
[   11.801360] REISERFS (device hda7): journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   11.801864] REISERFS (device hda7): checking transaction log (hda7)
[   11.857699] REISERFS (device hda7): Using r5 hash to sort names
[   12.042711] fuse init (API version 7.13)
[   12.662946] Adding 538168k swap on /dev/hda3.  Priority:-1 extents:1 across:538168k 
[   17.817441] ttyS1: LSR safety check engaged!
[   18.176658] hdc: UDMA/33 mode selected
[   52.576013] cfg80211: Calling CRDA to update world regulatory domain
[   52.585256] lib80211: common routines for IEEE802.11 drivers
[   52.585260] lib80211_crypt: registered algorithm 'NULL'
[   52.599667] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   52.599671] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   52.614407] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[   52.614412] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[   52.615492] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[   52.615499] ipw2100 0000:02:06.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
[   52.616481] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[   52.616509] ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
[   58.631983] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   62.343247] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   63.425083] lib80211_crypt: registered algorithm 'CCMP'
[   72.670029] eth1: no IPv6 routers present
[27219.671734] ipw2100: Fatal interrupt. Scheduling firmware restart.
[27350.680044] ipw2100: exit - failed to send CARD_DISABLE command
[27607.933141] ipw2100: exit - failed to send CARD_DISABLE command
[27611.000020] ------------[ cut here ]------------
[27611.000046] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x1ed/0x200()
[27611.000053] Hardware name: Pro 7000X      
[27611.000060] NETDEV WATCHDOG: eth1 (ipw2100): transmit queue 0 timed out
[27611.000067] Modules linked in: lib80211_crypt_ccmp iptable_filter ipw2100 libipw lib80211 cfg80211 cpufreq_ondemand nls_iso8859_1 nls_cp850 fuse nls_cp437 irda crc_ccitt wbsd mmc_core snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device ohci1394 container battery ac uhci_hcd thermal processor ieee1394 snd_pcm_oss snd_mixer_oss ehci_hcd snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm joydev snd_page_alloc
[27611.000153] Pid: 4307, comm: xfce4-wavelan-p Not tainted 2.6.33-rc8-DBUG-00204-gbe64c97-dirty #44
[27611.000161] Call Trace:
[27611.000179]  [<c1029ffe>] ? warn_slowpath_common+0x6e/0xb0
[27611.000190]  [<c13289ad>] ? dev_watchdog+0x1ed/0x200
[27611.000201]  [<c102a08b>] ? warn_slowpath_fmt+0x2b/0x30
[27611.000211]  [<c13289ad>] ? dev_watchdog+0x1ed/0x200
[27611.000223]  [<c1024768>] ? activate_task+0x58/0x70
[27611.000233]  [<c102668c>] ? try_to_wake_up+0xcc/0x120
[27611.000245]  [<c10382e5>] ? run_timer_softirq+0x135/0x300
[27611.000257]  [<c1052706>] ? tick_dev_program_event+0x46/0xf0
[27611.000267]  [<c13287c0>] ? dev_watchdog+0x0/0x200
[27611.000278]  [<c102fdb0>] ? __do_softirq+0x70/0x1a0
[27611.000290]  [<c13b923e>] ? schedule+0x32e/0x690
[27611.000300]  [<c102ff0d>] ? do_softirq+0x2d/0x40
[27611.000309]  [<c10301d5>] ? irq_exit+0x75/0x80
[27611.000321]  [<c10171a4>] ? smp_apic_timer_interrupt+0x44/0x80
[27611.000333]  [<c13bb40e>] ? apic_timer_interrupt+0x2a/0x30
[27611.000347]  [<c11b6a5d>] ? _copy_from_user+0x4d/0x130
[27611.000360]  [<c10c2a1b>] ? do_sys_poll+0x6b/0x3f0
[27611.000370]  [<c10c27b0>] ? __pollwait+0x0/0xf0
[27611.000380]  [<c10c28a0>] ? pollwake+0x0/0x60
[27611.000390]  [<c1024768>] ? activate_task+0x58/0x70
[27611.000404]  [<c10451bb>] ? autoremove_wake_function+0x1b/0x40
[27611.000417]  [<c10213a0>] ? __wake_up_common+0x40/0x70
[27611.000428]  [<c1041304>] ? insert_work+0x64/0xd0
[27611.000440]  [<c104afd5>] ? T.332+0x15/0x1a0
[27611.000451]  [<c10c28f3>] ? pollwake+0x53/0x60
[27611.000461]  [<c10266e0>] ? default_wake_function+0x0/0x10
[27611.000472]  [<c10213a0>] ? __wake_up_common+0x40/0x70
[27611.000487]  [<c130cf52>] ? sock_def_readable+0x32/0x80
[27611.000499]  [<c1378b6e>] ? unix_stream_sendmsg+0x1ae/0x380
[27611.000510]  [<c137acdc>] ? unix_stream_recvmsg+0x22c/0x570
[27611.000526]  [<c1317020>] ? netdev_run_todo+0x40/0x260
[27611.000537]  [<c130b1cc>] ? sock_aio_read+0x10c/0x120
[27611.000549]  [<c10b3146>] ? do_sync_readv_writev+0xb6/0xf0
[27611.000560]  [<c10b331d>] ? do_sync_read+0xad/0xf0
[27611.000573]  [<c104db30>] ? ktime_get_ts+0xd0/0x100
[27611.000584]  [<c104d946>] ? getnstimeofday+0x46/0xf0
[27611.000594]  [<c10c2f2a>] ? sys_poll+0x5a/0xc0
[27611.000605]  [<c1002d10>] ? sysenter_do_call+0x12/0x26
[27611.000614] ---[ end trace 9f56b31de93051e2 ]---
[27793.900044] ipw2100: exit - failed to send CARD_DISABLE command
[27852.972053] ipw2100: exit - failed to send CARD_DISABLE command
[27953.334038] ipw2100: exit - failed to send CARD_DISABLE command
[27973.705150] ipw2100: exit - failed to send CARD_DISABLE command
[27973.705165] ipw2100: exit - failed to send CARD_DISABLE command
[27984.507146] ipw2100: exit - failed to send CARD_DISABLE command
[27984.507162] ipw2100: exit - failed to send CARD_DISABLE command
[28151.021039] ipw2100: exit - failed to send CARD_DISABLE command
[28218.441153] ipw2100: exit - failed to send CARD_DISABLE command
[28870.752149] ipw2100: exit - failed to send CARD_DISABLE command
[29132.530147] ipw2100: exit - failed to send CARD_DISABLE command
[29188.044045] ipw2100: exit - failed to send CARD_DISABLE command
[29362.529031] ipw2100: exit - failed to send CARD_DISABLE command
[29405.342140] ipw2100: exit - failed to send CARD_DISABLE command
[29405.342157] ipw2100: exit - failed to send CARD_DISABLE command
[29415.991038] ipw2100: exit - failed to send CARD_DISABLE command
[29435.757151] ipw2100: exit - failed to send CARD_DISABLE command
[29435.757168] ipw2100: exit - failed to send CARD_DISABLE command
[29470.156159] ipw2100: exit - failed to send CARD_DISABLE command
[29470.156175] ipw2100: exit - failed to send CARD_DISABLE command
[29483.575039] ipw2100: exit - failed to send CARD_DISABLE command
[29483.575056] ipw2100: exit - failed to send CARD_DISABLE command
[29489.501595] ipw2100 0000:02:06.0: PCI INT A disabled
[29491.434730] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[29491.434735] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[29491.436193] ipw2100 0000:02:06.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
[29491.436794] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[29491.436820] ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
[29491.811331] ADDRCONF(NETDEV_UP): eth1: link is not ready
[29500.765533] ADDRCONF(NETDEV_UP): eth1: link is not ready
[29501.816256] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[29511.923023] eth1: no IPv6 routers present
[29582.041152] ipw2100: exit - failed to send CARD_DISABLE command
[29582.041167] ipw2100: exit - failed to send CARD_DISABLE command
[29620.488047] ipw2100: exit - failed to send CARD_DISABLE command
[29670.560061] ipw2100: exit - failed to send CARD_DISABLE command
[29670.560077] ipw2100: exit - failed to send CARD_DISABLE command
[29746.237038] ipw2100: exit - failed to send CARD_DISABLE command
[29746.237053] ipw2100: exit - failed to send CARD_DISABLE command
[29780.349151] ipw2100: exit - failed to send CARD_DISABLE command
[29780.349167] ipw2100: exit - failed to send CARD_DISABLE command
[29802.001045] ipw2100: exit - failed to send CARD_DISABLE command
[29824.167040] ipw2100: exit - failed to send CARD_DISABLE command
[29861.028059] ipw2100: exit - failed to send CARD_DISABLE command
[29861.028075] ipw2100: exit - failed to send CARD_DISABLE command
[29871.463039] ipw2100: exit - failed to send CARD_DISABLE command
[29893.385046] ipw2100: exit - failed to send CARD_DISABLE command
[30034.245047] ipw2100: exit - failed to send CARD_DISABLE command
[30034.245061] ipw2100: exit - failed to send CARD_DISABLE command
[30337.980157] ipw2100: exit - failed to send CARD_DISABLE command
[30399.756029] ipw2100: exit - failed to send CARD_DISABLE command
[30399.756042] ipw2100: exit - failed to send CARD_DISABLE command
[30491.000152] ipw2100: exit - failed to send CARD_DISABLE command
[30541.553146] ipw2100: exit - failed to send CARD_DISABLE command
[30616.512167] ipw2100: exit - failed to send CARD_DISABLE command
[30659.442146] ipw2100: exit - failed to send CARD_DISABLE command
[30684.851163] ipw2100: exit - failed to send CARD_DISABLE command
[30966.546095] ipw2100: Fatal interrupt. Scheduling firmware restart.
[32118.175064] ipw2100: Error disabling radio -5
[32118.175075] ipw2100: eth1: Power down command failed: Error -5
[32118.175131] ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
[32118.734960] ipw2100 0000:02:06.0: PCI INT A disabled
[32120.343522] irq 10: nobody cared (try booting with the "irqpoll" option)
[32120.343539] Pid: 4181, comm: X Tainted: G        W  2.6.33-rc8-DBUG-00204-gbe64c97-dirty #44
[32120.343548] Call Trace:
[32120.343570]  [<c10647c4>] ? __report_bad_irq+0x24/0x90
[32120.343582]  [<c1064980>] ? note_interrupt+0x150/0x190
[32120.343594]  [<c106539b>] ? handle_level_irq+0xcb/0x110
[32120.343607]  [<c10044c2>] ? handle_irq+0x32/0x60
[32120.343616]  [<c1003eda>] ? do_IRQ+0x3a/0xb0
[32120.343628]  [<c103018c>] ? irq_exit+0x2c/0x80
[32120.343638]  [<c1003229>] ? common_interrupt+0x29/0x30
[32120.343649]  [<c102fd75>] ? __do_softirq+0x35/0x1a0
[32120.343660]  [<c1065375>] ? handle_level_irq+0xa5/0x110
[32120.343670]  [<c102ff0d>] ? do_softirq+0x2d/0x40
[32120.343679]  [<c10301d5>] ? irq_exit+0x75/0x80
[32120.343688]  [<c1003ee3>] ? do_IRQ+0x43/0xb0
[32120.343698]  [<c103018c>] ? irq_exit+0x2c/0x80
[32120.343708]  [<c1003229>] ? common_interrupt+0x29/0x30
[32120.343715] handlers:
[32120.343719] [<e02b82e0>] (snd_intel8x0_interrupt+0x0/0x240 [snd_intel8x0])
[32120.343752] [<e03fd320>] (ohci_irq_handler+0x0/0x8d0 [ohci1394])
[32120.343768] Disabling IRQ #10