All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alban Browaeys <prahal@yahoo.com>
To: John Linville <linville@tuxdriver.com>
Cc: rt2x00 Users List <users@rt2x00.serialmonkey.com>,
	linux-wireless <linux-wireless@vger.kernel.org>,
	Ivo van Doorn <ivdoorn@gmail.com>
Subject: [PATCH 1/2] rt2x00 : hw support txdone implementation. (without fallback change)
Date: Thu, 25 Feb 2010 05:19:50 +0100	[thread overview]
Message-ID: <4B85FA66.2020503@yahoo.com> (raw)

This is an implementation that support WCID being the key_index coming
from benoit without the change in the meaning of the tx fallback flag.

Ivo: in previous patch I forgot about your comment months ago against the
fallback meaning change. This version thus avoid this change.

Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: Alban Browaeys <prahal@yahoo.com>
---
  drivers/net/wireless/rt2x00/rt2800pci.c |   86 +++++++++++++------------------
  1 files changed, 36 insertions(+), 50 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 7899789..46b06af 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -920,76 +920,61 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
  {
  	struct data_queue *queue;
  	struct queue_entry *entry;
-	struct queue_entry *entry_done;
-	struct queue_entry_priv_pci *entry_priv;
+	__le32 *txwi;
  	struct txdone_entry_desc txdesc;
  	u32 word;
  	u32 reg;
-	u32 old_reg;
-	unsigned int type;
-	unsigned int index;
-	u16 mcs, real_mcs;
-
+	int i;
+	int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
+	u16 mcs, tx_mcs;
+	
  	/*
-	 * During each loop we will compare the freshly read
-	 * TX_STA_FIFO register value with the value read from
-	 * the previous loop. If the 2 values are equal then
-	 * we should stop processing because the chance it
-	 * quite big that the device has been unplugged and
-	 * we risk going into an endless loop.
+	 * To avoid an endlees loop, we only read the TX_STA_FIFO register up
+	 * to 256 times (this is enought to get all values from the FIFO). In
+	 * normal situation, the loop is terminated when we reach a value with
+	 * TX_STA_FIFO_VALID bit is 0.
  	 */
-	old_reg = 0;
-
-	while (1) {
+	
+	for (i=0; i<256; i++) {
  		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
  		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
  			break;
  
-		if (old_reg == reg)
-			break;
-		old_reg = reg;
+		wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+		ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+		pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
  
  		/*
  		 * Skip this entry when it contains an invalid
  		 * queue identication number.
  		 */
-		type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE) - 1;
-		if (type >= QID_RX)
+		if (pid < 1)
  			continue;
  
-		queue = rt2x00queue_get_queue(rt2x00dev, type);
+		queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
  		if (unlikely(!queue))
  			continue;
  
  		/*
-		 * Skip this entry when it contains an invalid
-		 * index number.
+		 * Inside each queue, we process each entry in a chronological
+		 * order. We first check that the queue is not empty.
  		 */
-		index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID) - 1;
-		if (unlikely(index >= queue->limit))
+		if (queue->length == 0)
  			continue;
+		entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
  
-		entry = &queue->entries[index];
-		entry_priv = entry->priv_data;
-		rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word);
-
-		entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-		while (entry != entry_done) {
-			/*
-			 * Catch up.
-			 * Just report any entries we missed as failed.
-			 */
-			WARNING(rt2x00dev,
-				"TX status report missed for entry %d\n",
-				entry_done->entry_idx);
-
-			txdesc.flags = 0;
-			__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
-			txdesc.retry = 0;
-
-			rt2x00lib_txdone(entry_done, &txdesc);
-			entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-		}
+		/* Check if we got a match by looking at WCID/ACK/PID
+		 * fields */
+		txwi = (__le32 *)(entry->skb->data -
+				  rt2x00dev->hw->extra_tx_headroom);
+
+		rt2x00_desc_read(txwi, 1, &word);
+		tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
+		tx_ack  = rt2x00_get_field32(word, TXWI_W1_ACK);
+		tx_pid  = rt2x00_get_field32(word, TXWI_W1_PACKETID);
+
+		if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
+			WARNING(rt2x00dev, "invalid TX_STA_FIFO content\n");
  
  		/*
  		 * Obtain the status about this packet.
@@ -1010,10 +995,11 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
  		 * we have mcs = tx_mcs - 1. So the number of
  		 * retry is (tx_mcs - mcs).
  		 */
-		mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
-		real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+		mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+		rt2x00_desc_read(txwi, 0, &word);
+		tx_mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
  		__set_bit(TXDONE_FALLBACK, &txdesc.flags);
-		txdesc.retry = mcs - min(mcs, real_mcs);
+		txdesc.retry = tx_mcs - min(tx_mcs, mcs);
  
  		rt2x00lib_txdone(entry, &txdesc);
  	}
-- 
1.7.0



             reply	other threads:[~2010-02-25  4:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-25  4:19 Alban Browaeys [this message]
2010-02-25 17:22 ` [PATCH 1/2] rt2x00 : hw support txdone implementation. (without fallback change) Gertjan van Wingerde
2010-02-25 18:54   ` Alban Browaeys
2010-02-25 17:48 ` Pavel Roskin
2010-02-25 19:34   ` Alban Browaeys
2010-02-25 20:21     ` Pavel Roskin
2010-02-25 23:56       ` Alban Browaeys
2010-02-25 20:46     ` Ivo van Doorn
2010-02-25 20:53       ` Josef Bacik
2010-02-26  1:21         ` Alban Browaeys
2010-02-25 23:37       ` Alban Browaeys

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B85FA66.2020503@yahoo.com \
    --to=prahal@yahoo.com \
    --cc=ivdoorn@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=users@rt2x00.serialmonkey.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.