Re: PCI on 834x

[Gary Thomas <gary@mlbassoc.com>]

On 02/24/2010 04:08 PM, Gary Thomas wrote:
> On 02/24/2010 03:25 PM, Kumar Gala wrote:
>>
>> On Feb 24, 2010, at 4:14 PM, Gary Thomas wrote:
>>
>>> On 02/24/2010 01:51 PM, Anton Vorontsov wrote:
>>>> On Wed, Feb 24, 2010 at 02:26:20PM -0600, Scott Wood wrote:
>>>>> Gary Thomas wrote:
>>>>>> Yes, I'm using the exact same kernel with these two different PCI
>>>>>> setups (done by the boot loader).
>>>>>>
>>>>>> Restricting the memory via mem=128M has no effect - the PCI layout
>>>>>> is the same.
>>>>>>
>>>>>> I think the outbound window size is required because of how the Linux PCI
>>>>>> remaps the space (note in my dumps that it put the MMIO of the
>>>>>> boards starting
>>>>>> at 0xD0000000 when the inbound window is 0x10000000)
>>>>>
>>>>> I see where the amount of RAM is mattering -- Linux is assigning
>>>>> outbound I/O space to the PCI controller itself (device 00:00.0) and
>>>>> the amount that it asks for seems to differ based on memory size.
>>>>> Linux ought to skip that device when assigning resources. Some
>>>>> platforms do this (search for pci_exclude_device), but it seems to
>>>>> be missing on 83xx.
>>>>
>>>> Actually, 83xx had these exclude_device hooks, but they were removed:
>>>>
>>>> commit d8f1324a5063c833862328ceafabc53ac3cc4f71
>>>> Author: Kumar Gala<galak@kernel.crashing.org>
>>>> Date: Wed Sep 12 22:14:10 2007 -0500
>>>>
>>>> [POWERPC] 83xx: Removed PCI exclude of PHB
>>>>
>>>> Now that the generic code doesn't assign resources for Freescale
>>>> PHBs we dont have to explicitly exclude it.
>>>>
>>>> Signed-off-by: Kumar Gala<galak@kernel.crashing.org>
>>>>
>>>>
>>>> May be the generic code started to assign the resources again?
>>>>
>>>
>>> That cracked it; I re-enabled the exclusion of the bridge and now
>>> it's all working fine.
>>>
>>> Thanks for the help
>>>
>>> Note: I'm working with a fairly old kernel, so these results would
>>> have to be reworked against the latest.
>>
>> Odd that the generic code isn't dealing with that for you.
>
> Remember it's an old kernel (2.6.28), so who knows the status.
> As I said, I'll revisit this when I move to a newer kernel.
>

I may have been too hasty pronouncing this fixed.  Indeed, the
SATA interface now works, but my video card (Fujitsu Coral-P)
does not work when it's mapped at the bottom of the PCI space :-(

With the bridge mapped, the video ends up at a non-zero address
(0xC8000000..0xCFFFFFFF).  If it gets mapped to 0xC0000000, it
fails to respond to MMIO accesses.

Any ideas how I might get around this?  Is there a way to force
the PCI allocator to start somewhere other than [relative] zero?

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------