From: Frank Schaefer <fschaefer.oss-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: GeForce 6150SE: DVI-connector not detected
Date: Sat, 27 Feb 2010 12:05:30 +0100 [thread overview]
Message-ID: <4B88FC7A.6010403@googlemail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 501 bytes --]
Hi,
today I tested kernel 2.6.33 and it seems that nouveau doesn't detect
the DVI-connector of my GeForce 6150SE (Asus M2N-VM DH).
The screen turns black during boot-process immediately after the "[drm]
nouveau ..." messages appeared.
The board has two connectors (DVI + VGA) and I'm using the DVI-connector
only. Everything is fine when I use a VGA-cable instead.
See boot.msg in the attachment. Please tell me if you need further
informations. I can also test patches.
Regards,
Frank Schaefer
[-- Attachment #2: boot.msg --]
[-- Type: text/plain, Size: 54052 bytes --]
Inspecting /boot/System.map-2.6.33-0.1-pae
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.33-0.1-pae (root@Athlon64X2-5000) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #2 SMP Thu Feb 25 16:29:19 CET 2010
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
<6> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 00000000afee0000 (usable)
<6> BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
<6> BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data)
<6> BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved)
<6> BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
<6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6> BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
<6>NX (Execute Disable) protection: active
<6>DMI 2.4 present.
<5>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
<7>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<6>last_pfn = 0x1a0000 max_arch_pfn = 0x1000000
<7>MTRR default type: uncachable
<7>MTRR fixed ranges enabled:
<7> 00000-9FFFF write-back
<7> A0000-BFFFF uncachable
<7> C0000-C7FFF write-protect
<7> C8000-FFFFF uncachable
<7>MTRR variable ranges enabled:
<7> 0 base 0000000000 mask FF80000000 write-back
<7> 1 base 0080000000 mask FFC0000000 write-back
<7> 2 base 0100000000 mask FF80000000 write-back
<7> 3 base 0180000000 mask FFE0000000 write-back
<7> 4 disabled
<7> 5 disabled
<7> 6 disabled
<7> 7 disabled
<7>TOM2: 00000001a0000000 aka 6656M
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
<6>Scanning 0 areas for low memory corruption
<6>modified physical RAM map:
<6> modified: 0000000000000000 - 0000000000010000 (reserved)
<6> modified: 0000000000010000 - 000000000009f000 (usable)
<6> modified: 000000000009f000 - 00000000000a0000 (reserved)
<6> modified: 00000000000f0000 - 0000000000100000 (reserved)
<6> modified: 0000000000100000 - 00000000afee0000 (usable)
<6> modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
<6> modified: 00000000afee3000 - 00000000afef0000 (ACPI data)
<6> modified: 00000000afef0000 - 00000000aff00000 (reserved)
<6> modified: 00000000b0000000 - 00000000c0000000 (reserved)
<6> modified: 00000000f0000000 - 00000000f4000000 (reserved)
<6> modified: 00000000fec00000 - 0000000100000000 (reserved)
<6> modified: 0000000100000000 - 00000001a0000000 (usable)
<7>initial memory mapped : 0 - 00a00000
<6>found SMP MP-table at [c00f54d0] f54d0
<6>init_memory_mapping: 0000000000000000-00000000361fe000
<7> 0000000000 - 0000200000 page 4k
<7> 0000200000 - 0036000000 page 2M
<7> 0036000000 - 00361fe000 page 4k
<7>kernel direct mapping tables up to 361fe000 @ 15000-1b000
<6>RAMDISK: 37a58000 - 37feff56
<6>Allocated new RAMDISK: 005af000 - 00b46f56
<6>Move RAMDISK from 0000000037a58000 - 0000000037feff55 to 005af000 - 00b46f55
<4>ACPI: RSDP 000f7060 00024 (v02 Nvidia)
<4>ACPI: XSDT afee30c0 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
<4>ACPI: FACP afeeb840 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
<4>ACPI: DSDT afee3240 0858F (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
<4>ACPI: FACS afee0000 00040
<4>ACPI: SSDT afeeba40 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
<4>ACPI: MCFG afeebd40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
<4>ACPI: APIC afeeb980 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
<7>ACPI: Local APIC address 0xfee00000
<5>5790MB HIGHMEM available.
<5>865MB LOWMEM available.
<6> mapped low ram: 0 - 361fe000
<6> low ram: 0 - 361fe000
<6> node 0 low ram: 00000000 - 361fe000
<6> node 0 bootmap 00017000 - 0001dc40
<6>(14 early reservations) ==> bootmem [0000000000 - 00361fe000]
<6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
<6> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6> #2 [0000100000 - 00005a8ab8] TEXT DATA BSS ==> [0000100000 - 00005a8ab8]
<6> #3 [00005a9000 - 00005ae14d] BRK ==> [00005a9000 - 00005ae14d]
<6> #4 [00000f54e0 - 0000100000] BIOS reserved ==> [00000f54e0 - 0000100000]
<6> #5 [00000f54d0 - 00000f54e0] MP-table mpf ==> [00000f54d0 - 00000f54e0]
<6> #6 [000009f000 - 00000f1400] BIOS reserved ==> [000009f000 - 00000f1400]
<6> #7 [00000f1544 - 00000f54d0] BIOS reserved ==> [00000f1544 - 00000f54d0]
<6> #8 [00000f1400 - 00000f1544] MP-table mpc ==> [00000f1400 - 00000f1544]
<6> #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
<6> #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
<6> #11 [0000015000 - 0000017000] PGTABLE ==> [0000015000 - 0000017000]
<6> #12 [00005af000 - 0000b46f56] NEW RAMDISK ==> [00005af000 - 0000b46f56]
<6> #13 [0000017000 - 000001e000] BOOTMAP ==> [0000017000 - 000001e000]
<4>Zone PFN ranges:
<4> DMA 0x00000010 -> 0x00001000
<4> Normal 0x00001000 -> 0x000361fe
<4> HighMem 0x000361fe -> 0x001a0000
<4>Movable zone start PFN for each node
<4>early_node_map[3] active PFN ranges
<4> 0: 0x00000010 -> 0x0000009f
<4> 0: 0x00000100 -> 0x000afee0
<4> 0: 0x00100000 -> 0x001a0000
<7>On node 0 totalpages: 1375855
<7>free_area_init_node: node 0, pgdat c04cd2c0, node_mem_map c1001200
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 3951 pages, LIFO batch:0
<7> Normal zone: 1700 pages used for memmap
<7> Normal zone: 215898 pages, LIFO batch:31
<7> HighMem zone: 11581 pages used for memmap
<7> HighMem zone: 1142693 pages, LIFO batch:31
<6>Using APIC driver default
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<7>nr_irqs_gsi: 24
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<6>Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
<6>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
<6>PERCPU: Embedded 12 pages/cpu @c4600000 s26968 r0 d22184 u1048576
<6>pcpu-alloc: s26968 r0 d22184 u1048576 alloc=1*2097152
<6>pcpu-alloc: [0] 0 1
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1362542
<5>Kernel command line: root=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 resume=/dev/sda5 splash=silent vmalloc=144M hpet=force vga=0x31B
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<6>allocated 34078400 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>Initializing HighMem for node 0 (000361fe:001a0000)
<6>Memory: 5404368k/6815744k available (2399k kernel code, 98040k reserved, 1515k data, 444k init, 4617096k highmem)
<6>virtual kernel memory layout:
<6> fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB)
<6> pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
<6> vmalloc : 0xf69fe000 - 0xff9fe000 ( 144 MB)
<6> lowmem : 0xc0000000 - 0xf61fe000 ( 865 MB)
<6> .init : 0xc04d3000 - 0xc0542000 ( 444 kB)
<6> .data : 0xc0357d4e - 0xc04d2968 (1515 kB)
<6> .text : 0xc0100000 - 0xc0357d4e (2399 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<6>Hierarchical RCU implementation.
<6>NR_IRQS:512
<6>Extended CMOS year: 2000
<7>spurious 8259A interrupt: IRQ7.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<4>Fast TSC calibration using PIT
<4>Detected 2612.304 MHz processor.
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.60 BogoMIPS (lpj=10449216)
<6>Security Framework initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>mce: CPU supports 5 MCE banks
<6>using C1E aware idle routine
<6>Performance Events: AMD PMU driver.
<6>... version: 0
<6>... bit width: 48
<6>... generic registers: 4
<6>... value mask: 0000ffffffffffff
<6>... max period: 00007fffffffffff
<6>... fixed-purpose events: 0
<6>... event mask: 000000000000000f
<6>Checking 'hlt' instruction... OK.
<6>ACPI: Core revision 20091214
<6>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
<6>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
<6>Booting Node 0, Processors #1 Ok.
<6>Initializing CPU#1
<6>Brought up 2 CPUs
<6>Total of 2 processors activated (10448.63 BogoMIPS).
<6>System has AMD C1E enabled
<6>Switch to broadcast mode on CPU1
<6>Switch to broadcast mode on CPU0
<6>regulator: core version 0.5
<6>NET: Registered protocol family 16
<6>EISA bus registered
<6>ACPI: bus type pci registered
<6>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
<6>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
<6>PCI: Using MMCONFIG for extended config space
<6>PCI: Using configuration type 1 for base access
<4>bio: create slab <bio-0> at 0
<7>ACPI: EC: Look up EC in DSDT
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: No dock devices found.
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
<7>pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
<7>pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
<7>pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored)
<7>pci_root PNP0A08:00: host bridge window [io 0x7000-0xffff] (ignored)
<7>pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
<7>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
<7>pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored)
<7>pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
<7>pci 0000:00:01.0: Force enabled HPET at 0xfed00000
<7>pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
<7>pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
<7>pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
<7>pci 0000:00:01.1: PME# supported from D3hot D3cold
<7>pci 0000:00:01.1: PME# disabled
<7>pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
<7>pci 0000:00:02.0: supports D1 D2
<7>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>pci 0000:00:02.0: PME# disabled
<7>pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
<7>pci 0000:00:02.1: supports D1 D2
<7>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>pci 0000:00:02.1: PME# disabled
<7>pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
<7>pci 0000:00:05.0: PME# supported from D3hot D3cold
<7>pci 0000:00:05.0: PME# disabled
<7>pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
<7>pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
<7>pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
<7>pci 0000:00:07.0: supports D1 D2
<7>pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>pci 0000:00:07.0: PME# disabled
<7>pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
<7>pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
<7>pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
<7>pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
<7>pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
<7>pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
<7>pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
<7>pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
<7>pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
<7>pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
<7>pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f]
<7>pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
<7>pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>pci 0000:00:09.0: PME# disabled
<7>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>pci 0000:00:0b.0: PME# disabled
<7>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>pci 0000:00:0c.0: PME# disabled
<7>pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
<7>pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
<7>pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
<7>pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>pci 0000:01:06.0: reg 10: [mem 0xfd8ff000-0xfd8ff7ff]
<7>pci 0000:01:06.0: reg 14: [mem 0xfd8f8000-0xfd8fbfff]
<7>pci 0000:01:06.0: supports D1 D2
<7>pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
<7>pci 0000:01:06.0: PME# disabled
<7>pci 0000:01:07.0: reg 10: [io 0xbc00-0xbc07]
<7>pci 0000:01:07.0: reg 14: [mem 0xfd8fe000-0xfd8fe0ff]
<7>pci 0000:01:07.0: supports D1 D2
<7>pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot
<7>pci 0000:01:07.0: PME# disabled
<7>pci 0000:01:08.0: reg 10: [mem 0xfdfff000-0xfdffffff pref]
<7>pci 0000:01:08.1: reg 10: [mem 0xfdffe000-0xfdffefff pref]
<6>pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
<7>pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
<7>pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff]
<7>pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
<6>pci 0000:00:09.0: PCI bridge to [bus 02-02]
<7>pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
<7>pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
<7>pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
<7>pci 0000:03:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
<7>pci 0000:03:00.0: reg 30: [mem 0xfdce0000-0xfdceffff pref]
<7>pci 0000:03:00.0: PME# supported from D3hot
<7>pci 0000:03:00.0: PME# disabled
<7>pci 0000:03:00.1: reg 10: [io 0x9c00-0x9c07]
<7>pci 0000:03:00.1: reg 14: [io 0x9800-0x9803]
<7>pci 0000:03:00.1: reg 18: [io 0x9400-0x9407]
<7>pci 0000:03:00.1: reg 1c: [io 0x9000-0x9003]
<7>pci 0000:03:00.1: reg 20: [io 0x8c00-0x8c0f]
<6>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
<6>pci 0000:00:0b.0: PCI bridge to [bus 03-03]
<7>pci 0000:00:0b.0: bridge window [io 0x8000-0x9fff]
<7>pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
<7>pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
<6>pci 0000:00:0c.0: PCI bridge to [bus 04-04]
<7>pci 0000:00:0c.0: bridge window [io 0x7000-0x7fff]
<7>pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
<7>pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
<7>pci_bus 0000:00: on NUMA node 0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
<6>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
<6>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
<6>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
<6>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
<6>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0
<6>ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
<6>ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
<6>ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
<6>ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0
<6>vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
<6>vgaarb: loaded
<6>PCI: Using ACPI for IRQ routing
<7>PCI: pci_cache_line_size set to 64 bytes
<6>NetLabel: Initializing
<6>NetLabel: domain hash size = 128
<6>NetLabel: protocols = UNLABELED CIPSOv4
<6>NetLabel: unlabeled traffic allowed by default
<7>hpet clockevent registered
<6>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
<6>Switching to clocksource hpet
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 14 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>system 00:01: [io 0x1000-0x107f] has been reserved
<6>system 00:01: [io 0x1080-0x10ff] has been reserved
<6>system 00:01: [io 0x1400-0x147f] has been reserved
<6>system 00:01: [io 0x1480-0x14ff] has been reserved
<6>system 00:01: [io 0x1800-0x187f] has been reserved
<6>system 00:01: [io 0x1880-0x18ff] has been reserved
<6>system 00:02: [io 0x0b78-0x0b7b] has been reserved
<6>system 00:02: [io 0x0f78-0x0f7b] has been reserved
<6>system 00:02: [io 0x0a78-0x0a7b] has been reserved
<6>system 00:02: [io 0x0e78-0x0e7b] has been reserved
<6>system 00:02: [io 0x0bbc-0x0bbf] has been reserved
<6>system 00:02: [io 0x0fbc-0x0fbf] has been reserved
<6>system 00:02: [io 0x04d0-0x04d1] has been reserved
<6>system 00:02: [io 0x0294-0x0297] has been reserved
<6>system 00:02: [io 0x0800-0x087f] has been reserved
<6>system 00:02: [io 0x0290-0x0297] could not be reserved
<6>system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
<6>system 00:0d: [mem 0x000d2800-0x000d3fff] has been reserved
<6>system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
<6>system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
<6>system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
<6>system 00:0d: [mem 0xafee0000-0xafefffff] could not be reserved
<6>system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
<6>system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
<6>system 00:0d: [mem 0x00100000-0xafedffff] could not be reserved
<6>system 00:0d: [mem 0xafff0000-0xbffeffff] could not be reserved
<6>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
<6>system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
<6>system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
<6>system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
<6>system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
<6>pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
<6>pci 0000:00:04.0: PCI bridge to [bus 01-01]
<6>pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
<6>pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff]
<6>pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
<6>pci 0000:00:09.0: PCI bridge to [bus 02-02]
<6>pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
<6>pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
<6>pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
<6>pci 0000:00:0b.0: PCI bridge to [bus 03-03]
<6>pci 0000:00:0b.0: bridge window [io 0x8000-0x9fff]
<6>pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
<6>pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
<6>pci 0000:00:0c.0: PCI bridge to [bus 04-04]
<6>pci 0000:00:0c.0: bridge window [io 0x7000-0x7fff]
<6>pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
<6>pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
<7>pci 0000:00:04.0: setting latency timer to 64
<7>pci 0000:00:09.0: setting latency timer to 64
<7>pci 0000:00:0b.0: setting latency timer to 64
<7>pci 0000:00:0c.0: setting latency timer to 64
<7>pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
<7>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
<7>pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
<7>pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
<7>pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
<7>pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
<7>pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
<7>pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
<7>pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
<7>pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
<7>pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
<7>pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
<7>pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
<7>pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
<7>pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
<7>pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>pci 0000:00:00.0: Found enabled HT MSI Mapping
<7>pci 0000:00:0d.0: Boot video device
<7>PCI: CLS 32 bytes, default 64
<6>Unpacking initramfs...
<6>Freeing initrd memory: 5727k freed
<6>Scanning for low memory corruption every 60 seconds
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1267270471.417:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.2
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 1550
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>pcieport 0000:00:09.0: setting latency timer to 64
<7>pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
<7>pcieport 0000:00:0b.0: setting latency timer to 64
<7>pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
<7>pcieport 0000:00:0c.0: setting latency timer to 64
<7>pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xf6a80000, using 10240k, total 262144k
<6>vesafb: mode is 1280x1024x32, linelength=5120, pages=0
<6>vesafb: protected mode interface info at c000:d030
<6>vesafb: pmi: set display start = c00cd066, set palette = c00cd0d0
<6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<4>Console: switching to colour frame buffer device 160x64
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>EISA: Probing bus 0 at eisa.0
<4>Cannot allocate resource for EISA slot 1
<4>Cannot allocate resource for EISA slot 7
<4>Cannot allocate resource for EISA slot 8
<6>EISA: Detected 0 cards.
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>TCP cubic registered
<6>Using IPI No-Shortcut mode
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<4>logips2pp: Detected unknown logitech mouse model 102
<6>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 444k freed
<6>Write protecting the kernel text: 2400k
<6>Write protecting the kernel read-only data: 1244k
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>sata_nv 0000:00:08.0: version 3.5
<4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
<6>sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
<7>sata_nv 0000:00:08.0: setting latency timer to 64
<6>scsi0 : sata_nv
<6>scsi1 : sata_nv
<6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
<4>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
<6>sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
<7>sata_nv 0000:00:08.1: setting latency timer to 64
<6>scsi2 : sata_nv
<6>scsi3 : sata_nv
<6>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
<6>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100
<6>ata3.00: configured for UDMA/100
<6>ata2: SATA link down (SStatus 0 SControl 300)
<5>scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N CB00 PQ: 0 ANSI: 5
<6>ata4: SATA link down (SStatus 0 SControl 300)
<7>pata_amd 0000:00:06.0: version 0.4.1
<7>pata_amd 0000:00:06.0: setting latency timer to 64
<6>scsi4 : pata_amd
<6>scsi5 : pata_amd
<6>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
<6>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
<7>ata6: port disabled. ignoring.
<7>ahci 0000:03:00.0: version 3.0
<4>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
<6>ahci 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
<6>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
<6>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
<7>ahci 0000:03:00.0: setting latency timer to 64
<6>scsi6 : ahci
<6>scsi7 : ahci
<6>ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16
<6>ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 16
<6>ata7: SATA link down (SStatus 0 SControl 300)
<6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata8.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
<6>ata8.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
<6>ata8.00: configured for UDMA/133
<5>scsi 7:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
<6>pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
<4>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
<6>pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
<7>pata_jmicron 0000:03:00.1: setting latency timer to 64
<6>scsi8 : pata_jmicron
<6>scsi9 : pata_jmicron
<6>ata9: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16
<6>ata10: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16
<6>Uniform Multi-Platform E-IDE driver
<5>ACPI: processor limited to max C-state 1
<6>thermal LNXTHERM:01: registered as thermal_zone0
<6>ACPI: Thermal Zone [THRM] (37 C)
<6>ACPI: Fan [FAN] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>udevd version 128 started
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<5>sd 7:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
<5>sd 7:0:0:0: [sda] Write Protect is off
<7>sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
<4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
<5>sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 sda3 < sda5
<6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
<4> sda6
<7>ehci_hcd 0000:00:02.1: setting latency timer to 64
<4> sda7 >
<6>ehci_hcd 0000:00:02.1: EHCI Host Controller
<5>sd 7:0:0:0: [sda] Attached SCSI disk
<6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:02.1: debug port 1
<7>ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
<6>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.33-0.1-pae ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 10 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
<6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
<7>ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.33-0.1-pae ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:02.0
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 10 ports detected
<6>PM: Starting manual resume from disk
<6>usb 1-5: new high speed USB device using ehci_hcd and address 3
<6>usb 1-5: New USB device found, idVendor=0bda, idProduct=8187
<6>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-5: Product: RTL8187_Wireless
<6>usb 1-5: Manufacturer: Manufacturer_Realtek_RTL8187_
<6>usb 1-5: SerialNumber: 0015AF08A9E5
<6>usb 1-10: new high speed USB device using ehci_hcd and address 4
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs (sda6): using internal journal
<6>EXT3-fs (sda6): mounted filesystem with writeback data mode
<6>usb 1-10: New USB device found, idVendor=0bda, idProduct=0151
<6>usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-10: Product: USB2.0-CRW
<6>usb 1-10: Manufacturer: Generic
<6>usb 1-10: SerialNumber: 20060413092100000
<6>usb 2-1: new full speed USB device using ohci_hcd and address 2
<6>usb 2-1: New USB device found, idVendor=03f0, idProduct=3104
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 2-1: Product: DeskJet 960C
<6>usb 2-1: Manufacturer: Hewlett-Packard
<6>usb 2-1: SerialNumber: HU1BU1S14HRO
<6>udevd version 128 started
<6>Floppy drive(s): fd0 is 1.44M
<5>scsi 2:0:0:0: Attached scsi generic sg0 type 5
<5>sd 7:0:0:0: Attached scsi generic sg1 type 0
<6>FDC 0 is a post-1991 82077
<6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
<6>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>ACPI: Power Button [PWRB]
<6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>ACPI: Power Button [PWRF]
<6>Initializing USB Mass Storage driver...
<6>input: PC Speaker as /devices/platform/pcspkr/input/input4
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 2:0:0:0: Attached scsi CD-ROM sr0
<6>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3104
<6>usbcore: registered new interface driver usblp
<6>scsi10 : usb-storage 1-10:1.0
<6>usbcore: registered new interface driver usb-storage
<6>Linux agpgart interface v0.103
<6>USB Mass Storage support registered.
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>parport_pc 00:09: reported by Plug and Play ACPI
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
<4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
<6>forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
<7>forcedeth 0000:00:07.0: setting latency timer to 64
<6>[drm] Initialized drm 1.1.0 20060810
<4>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
<6>ohci1394 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
<6>Linux video capture interface: v2.00
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fd8ff000-fd8ff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
<6>ppdev: user-space parallel port driver
<6>rtc_cmos 00:04: RTC can wake from S4
<6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
<6>bttv: driver version 0.9.18 loaded
<6>bttv: using 8 buffers with 2080k (520 pages) each for capture
<6>bttv: Bt8xx card found (0).
<4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
<6>bttv 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
<6>bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xfdfff000
<6>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
<6>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
<4>IRQ 18/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
<7>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
<6>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
<6>bt878 #0 [sw]: Test OK
<6>tveeprom 0-0050: Hauppauge model 37284, rev B421, serial# 5111944
<6>tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
<6>tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
<6>tveeprom 0-0050: audio processor is MSP3410D (idx 5)
<6>tveeprom 0-0050: has radio
<4>bttv0: Hauppauge eeprom indicates model#37284
<6>bttv0: tuner type=5
<6>forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:18:f3:a7:44:77
<6>forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
<4>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
<3>ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
<6>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<3>nForce2_smbus 0000:00:01.1: Error probing SMB1.
<6>i2c i2c-1: nForce2 SMBus adapter at 0x1c40
<4>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
<6>HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
<7>HDA Intel 0000:00:05.0: irq 27 for MSI/MSI-X
<7>HDA Intel 0000:00:05.0: setting latency timer to 64
<6>msp3400 0-0040: MSP3410D-C5 found @ 0x80 (bt878 #0 [sw])
<6>msp3400 0-0040: msp3400 supports nicam, mode is autodetect
<7>phy0: Selected rate control algorithm 'minstrel'
<6>phy0: hwaddr 00:15:af:08:a9:e5, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
<6>tuner 0-0042: chip found @ 0x84 (bt878 #0 [sw])
<6>rtl8187: Customer ID is 0x00
<6>Registered led device: rtl8187-phy0::radio
<6>Registered led device: rtl8187-phy0::tx
<6>Registered led device: rtl8187-phy0::rx
<6>rtl8187: wireless switch is on
<6>usbcore: registered new interface driver rtl8187
<6>tda9887 0-0042: creating new instance
<6>tda9887 0-0042: tda988[5/6/7] found
<6>tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
<6>tuner-simple 0-0061: creating new instance
<6>tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>bttv0: registered device video0
<6>bttv0: registered device vbi0
<6>bttv0: registered device radio0
<6>bttv0: PLL: 28636363 => 35468950 .. ok
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f3d0c3]
<6>hda_codec: AD1988: BIOS auto-probing.
<6>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
<4>ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
<6>nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23
<7>nouveau 0000:00:0d.0: setting latency timer to 64
<6>[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
<6>[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM
<5>[drm] nouveau 0000:00:0d.0: ... BIOS signature not found
<6>[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
<6>[drm] nouveau 0000:00:0d.0: ... appears to be valid
<6>[drm] nouveau 0000:00:0d.0: BIT BIOS found
<6>[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.14
<4>[drm] nouveau 0000:00:0d.0: TMDS table script pointers not stubbed
<6>[drm] nouveau 0000:00:0d.0: BIT table 'd' not found
<6>[drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
<6>[drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
<6>[drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
<5>[drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
<5>[drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 974f0000
<6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDA6D
<3>[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
<3>[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
<6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDBC4
<6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDBC5
<6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDD47
<6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDD90
<6>[TTM] Zone kernel: Available graphics memory: 397228 kiB.
<6>[TTM] Zone highmem: Available graphics memory: 2705776 kiB.
<6>[drm] nouveau 0000:00:0d.0: 256 MiB VRAM
<6>[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
<6>[drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
<6>[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0
<6>[drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0
<4>[drm] nouveau 0000:00:0d.0: DCB type 4 not known
<6>[drm] nouveau 0000:00:0d.0: Detected a VGA connector
<6>[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
<6>nouveau-0000:00:0d.0-1: Test OK
<6>No connectors reported connected with modes
<6>[drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on minor 0
<6>Adding 5245148k swap on /dev/sda5. Priority:-1 extents:1 across:5245148k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs (sda7): using internal journal
<6>EXT3-fs (sda7): mounted filesystem with writeback data mode
<6>fuse init (API version 7.13)
<5>scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
<5>scsi 10:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
<5>scsi 10:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
<5>scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
<5>sd 10:0:0:0: Attached scsi generic sg2 type 0
<5>sd 10:0:0:1: Attached scsi generic sg3 type 0
<5>sd 10:0:0:2: Attached scsi generic sg4 type 0
<5>sd 10:0:0:3: Attached scsi generic sg5 type 0
<5>sd 10:0:0:0: [sdb] Attached SCSI removable disk
<5>sd 10:0:0:2: [sdd] Attached SCSI removable disk
<5>sd 10:0:0:1: [sdc] Attached SCSI removable disk
<5>sd 10:0:0:3: [sde] Attached SCSI removable disk
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Feb 27 11:34:35 2010
Trying manual resume from /dev/sda5
Invoking userspace resume from /dev/sda5
resume: libgcrypt version: 1.4.1
Trying manual resume from /dev/sda5
Invoking in-kernel resume from /dev/sda5
Waiting for device /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6
/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6: clean, 891368/6553600 files, 11213743/26214055 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 /root
Boot logging started on /dev/tty1(/dev/console) at Sat Feb 27 11:34:45 2010
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up
acpid: 2 rules loaded
Starting acpid done
Initializing random number generatordone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31B RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31B RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-Bus daemondone
Setting up ISDN card contr0 Asus PCI (CCD HFC)done
Loading Driver contr0 hisaxdone
Starting Firewall Initialization (phase 1 of 2) done
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
lo
done eth0 device: nVidia Corporation MCP61 Ethernet (rev a2)
No configuration found for eth0
eth0
unusedSetting up service (localfs) network . . . . . . . . . .done
Loading CPUFreq modulesdone
Starting HAL daemondone
Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31B RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=64 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
done
Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
done
Not starting NFS client services - no NFS found in /etc/fstab:unused
Mount CIFS File Systems unused
Loading console font lat9w-16.psfu -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>checkproc: /usr/bin/kdm 2943
Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/auditd ]
done
Starting Avahi daemon done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/bin/ksysguardd) [ /usr/bin/ksysguardd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/bin/ksysguardd ]
Starting java.binfmt_misc done
Starting Name Service Cache Daemondone
Starting KDE ksysguard daemon (ksysguardd)done
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
ksysguardd 4
(c) 1999, 2000, 2001, 2002 Chris Schlaeger <cs-RoXCvvDuEio@public.gmane.org>
(c) 2001 Tobias Koenig <tokoe-RoXCvvDuEio@public.gmane.org>
(c) 2006-2008 Greg Martyn <greg.martyn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This program is part of the KDE Project and licensed under
the GNU GPL version 2. See http://www.kde.org for details.
Starting SMPPPDdone
Starting smartd done
<notice>startproc: execve (/usr/sbin/hddtemp) [ /usr/sbin/hddtemp -d -f /etc/hddtemp.db -p 7634 /dev/sda ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/hddtemp ]
Starting hddtemp daemon for /dev/sdadone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Setting up (remotefs) network interfaces:
wlan0
No configuration found for wlan0
wlan0
unused ippp0
ippp0 Startmode is 'manual'
ippp0
skippedSetting up service (remotefs) network . . . . . . . . . .done
Starting SSH daemondone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
done
Starting Firewall Initialization (phase 2 of 2) done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: nfs smbfs splash
<notice>killproc: kill(2221,3)
Boot logging started on /dev/tty1(/dev/console) at Sat Feb 27 11:36:06 2010
Master Resource Control: previous runlevel: 5, switching to runlevel: 0
Shutting down the Firewall skipped
<notice><notice>killproc: kill(3146,15)
<notice>killproc: kill(3673,15)
killproc: kill(3259,15)
<notice>killproc: kill(3412,15)
<notice>killproc: kill(3478,15)
Shutting down CRON daemondone
Shutting down cupsddone
Shutting down KDE ksysguard daemon (ksysguardd)done
Shutting down hddtemp daemon for /dev/sdadone
<notice>killproc: kill(2943,15)
Shutting down smartd done
Shutting down java.binfmt_misc done
<notice>killproc: kill(3647,15)
Shutting down service kdmdone
<notice>killproc: kill(3619,15)
<notice>killproc: kill(3111,15)
Shutting down mail service (Postfix)done
Shutting down Avahi daemon done
Shutting down SSH daemondone
/etc/init.d/kbd stopdone
<notice>killproc: kill(2273,15)
Shutting down auditd done
<notice>killproc: kill(3221,15)
Saving random seeddone
done
Shutting down service kdmdone
Shutting down acpid done
Shutting down Name Service Cache Daemondone
Shutting down SMPPPDdone
Shutting down (remotefs) network interfaces:
wlan0
No configuration found for wlan0
Nevertheless the interface will be shut down.
wlan0
doneUmount SMB/ CIFS File Systems done
<notice>killproc: kill(2371,15)
Shutting down NFS client services:done
<notice>killproc: kill(2972,15)
Shutting down rpcbind done
<notice>killproc: kill(2300,15)
<notice>killproc: kill(2316,15)
Shutting down HAL daemondone
Shutting down syslog servicesdone
Shutting down (localfs) network interfaces:
eth0 device: nVidia Corporation MCP61 Ethernet (rev a2)
No configuration found for eth0
Nevertheless the interface will be shut down.
eth0
doneShutting down service (localfs) network . . . . . . . . .done
<notice>killproc: kill(2326,15)
Stopping ISDN done
Shutting down D-Bus daemondone
<notice>killproc: kill(3826,3)
<notice>halt start
[-- Attachment #3: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next reply other threads:[~2010-02-27 11:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-27 11:05 Frank Schaefer [this message]
[not found] ` <4B88FC7A.6010403-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2010-02-27 15:50 ` GeForce 6150SE: DVI-connector not detected Francisco Jerez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B88FC7A.6010403@googlemail.com \
--to=fschaefer.oss-gm/ye1e23mwn+bqq9rbeug@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.