From: Denis Turischev <denis@compulab.co.il>
To: LKML <linux-kernel@vger.kernel.org>,
David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Subject: [RESEND] gpio: introduce it8761e_gpio driver for IT8761E Super I/O chip
Date: Sun, 28 Feb 2010 10:54:12 +0200 [thread overview]
Message-ID: <4B8A2F34.3020505@compulab.co.il> (raw)
Signed-off-by: Denis Turischev <denis@compulab.co.il>
---
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/it8761e_gpio.c | 231 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 238 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/it8761e_gpio.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 1730068..3c9e5ed 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -101,6 +101,12 @@ config GPIO_SCH
This driver can also be built as a module. If so, the module
will be called sch-gpio.
+config GPIO_IT8761E
+ tristate "IT8761E GPIO support"
+ depends on GPIOLIB
+ help
+ Say yes here to support GPIO functionality of IT8761E super I/O chip.
+
comment "I2C GPIO expanders:"
config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index aa1d06e..4adf128 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
+obj-$(CONFIG_GPIO_IT8761E) += it8761e_gpio.o
diff --git a/drivers/gpio/it8761e_gpio.c b/drivers/gpio/it8761e_gpio.c
new file mode 100644
index 0000000..753219c
--- /dev/null
+++ b/drivers/gpio/it8761e_gpio.c
@@ -0,0 +1,231 @@
+/*
+ * it8761_gpio.c - GPIO interface for IT8761E Super I/O chip
+ *
+ * Author: Denis Turischev <denis@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+
+#include <linux/gpio.h>
+
+#define SIO_CHIP_ID 0x8761
+#define CHIP_ID_HIGH_BYTE 0x20
+#define CHIP_ID_LOW_BYTE 0x21
+
+static u8 ports[2] = { 0x2e, 0x4e };
+static u8 port;
+
+static DEFINE_SPINLOCK(sio_lock);
+
+#define GPIO_NAME "it8761-gpio"
+#define GPIO_BA_HIGH_BYTE 0x60
+#define GPIO_BA_LOW_BYTE 0x61
+#define GPIO_IOSIZE 4
+#define GPIO1X_IO 0xf0
+#define GPIO2X_IO 0xf1
+
+static u16 gpio_ba;
+
+static u8 read_reg(u8 addr, u8 port)
+{
+ outb(addr, port);
+ return inb(port + 1);
+}
+
+static void write_reg(u8 data, u8 addr, u8 port)
+{
+ outb(addr, port);
+ outb(data, port + 1);
+}
+
+static void enter_conf_mode(u8 port)
+{
+ outb(0x87, port);
+ outb(0x61, port);
+ outb(0x55, port);
+ outb((port == 0x2e) ? 0x55 : 0xaa, port);
+}
+
+static void exit_conf_mode(u8 port)
+{
+ outb(0x2, port);
+ outb(0x2, port + 1);
+}
+
+static void enter_gpio_mode(u8 port)
+{
+ write_reg(0x2, 0x7, port);
+}
+
+static int it8761e_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
+{
+ u16 reg;
+ u8 bit;
+
+ bit = gpio_num % 7;
+ reg = (gpio_num >= 7) ? gpio_ba + 1 : gpio_ba;
+
+ return !!(inb(reg) & (1 << bit));
+}
+
+static int it8761e_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
+{
+ u8 curr_dirs;
+ u8 io_reg, bit;
+
+ bit = gpio_num % 7;
+ io_reg = (gpio_num >= 7) ? GPIO2X_IO : GPIO1X_IO;
+
+ spin_lock(&sio_lock);
+
+ enter_conf_mode(port);
+ enter_gpio_mode(port);
+
+ curr_dirs = read_reg(io_reg, port);
+
+ if (curr_dirs & (1 << bit))
+ write_reg(curr_dirs & ~(1 << bit), io_reg, port);
+
+ exit_conf_mode(port);
+
+ spin_unlock(&sio_lock);
+ return 0;
+}
+
+static void it8761e_gpio_set(struct gpio_chip *gc,
+ unsigned gpio_num, int val)
+{
+ u8 curr_vals, bit;
+ u16 reg;
+
+ bit = gpio_num % 7;
+ reg = (gpio_num >= 7) ? gpio_ba + 1 : gpio_ba;
+
+ spin_lock(&sio_lock);
+
+ curr_vals = inb(reg);
+ if (val)
+ outb(curr_vals | (1 << bit) , reg);
+ else
+ outb(curr_vals & ~(1 << bit), reg);
+
+ spin_unlock(&sio_lock);
+}
+
+static int it8761e_gpio_direction_out(struct gpio_chip *gc,
+ unsigned gpio_num, int val)
+{
+ u8 curr_dirs, io_reg, bit;
+
+ bit = gpio_num % 7;
+ io_reg = (gpio_num >= 7) ? GPIO2X_IO : GPIO1X_IO;
+
+ it8761e_gpio_set(gc, gpio_num, val);
+
+ spin_lock(&sio_lock);
+
+ enter_conf_mode(port);
+ enter_gpio_mode(port);
+
+ curr_dirs = read_reg(io_reg, port);
+
+ if (!(curr_dirs & (1 << bit)))
+ write_reg(curr_dirs | (1 << bit), io_reg, port);
+
+ exit_conf_mode(port);
+
+ spin_unlock(&sio_lock);
+ return 0;
+}
+
+static struct gpio_chip it8761e_gpio_chip = {
+ .label = GPIO_NAME,
+ .owner = THIS_MODULE,
+ .get = it8761e_gpio_get,
+ .direction_input = it8761e_gpio_direction_in,
+ .set = it8761e_gpio_set,
+ .direction_output = it8761e_gpio_direction_out,
+};
+
+static int __init it8761e_gpio_init(void)
+{
+ int i, id, err;
+
+ /* chip and port detection */
+ for (i = 0; i < ARRAY_SIZE(ports); i++) {
+ spin_lock(&sio_lock);
+ enter_conf_mode(ports[i]);
+
+ id = (read_reg(CHIP_ID_HIGH_BYTE, ports[i]) << 8) +
+ read_reg(CHIP_ID_LOW_BYTE, ports[i]);
+
+ exit_conf_mode(ports[i]);
+ spin_unlock(&sio_lock);
+
+ if (id == SIO_CHIP_ID) {
+ port = ports[i];
+ break;
+ }
+ }
+
+ if (!port)
+ return -ENODEV;
+
+ /* fetch GPIO base address */
+ enter_conf_mode(port);
+ enter_gpio_mode(port);
+ gpio_ba = (read_reg(GPIO_BA_HIGH_BYTE, port) << 8) +
+ read_reg(GPIO_BA_LOW_BYTE, port);
+ exit_conf_mode(port);
+
+ if (!request_region(gpio_ba, GPIO_IOSIZE, GPIO_NAME))
+ return -EBUSY;
+
+ it8761e_gpio_chip.base = -1;
+ it8761e_gpio_chip.ngpio = 14;
+
+ err = gpiochip_add(&it8761e_gpio_chip);
+ if (err < 0)
+ goto gpiochip_add_err;
+
+ return 0;
+
+gpiochip_add_err:
+ release_region(gpio_ba, GPIO_IOSIZE);
+ gpio_ba = 0;
+ return err;
+}
+
+static void __exit it8761e_gpio_exit(void)
+{
+ if (gpio_ba) {
+ gpiochip_remove(&it8761e_gpio_chip);
+
+ release_region(gpio_ba, GPIO_IOSIZE);
+ gpio_ba = 0;
+ }
+}
+module_init(it8761e_gpio_init);
+module_exit(it8761e_gpio_exit);
+
+MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
+MODULE_DESCRIPTION("GPIO interface for IT8761E Super I/O chip");
+MODULE_LICENSE("GPL");
--
1.6.3.3
next reply other threads:[~2010-02-28 8:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-28 8:54 Denis Turischev [this message]
2010-03-02 22:40 ` [RESEND] gpio: introduce it8761e_gpio driver for IT8761E Super I/O chip Andrew Morton
2010-03-17 10:09 ` it8761e_gpio: Fixed bug in gpio numbering Denis Turischev
2010-04-28 8:24 ` Denis Turischev
2010-06-30 15:23 ` [PATCH 1/2] gpio: SIO IT8761, Poulsbo SCH are I/O mapped Denis Turischev
2010-06-30 16:17 ` [PATCH 2/2] gpio: introduce f71808e_gpio driver for F71808E Super I/O chip Denis Turischev
2010-06-30 16:37 ` David Brownell
2010-07-01 10:06 ` Denis Turischev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B8A2F34.3020505@compulab.co.il \
--to=denis@compulab.co.il \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.