Re: [PATCH 3/4] bcm63xx: add DWVS0 board

[Sergei Shtylyov <sshtylyov@mvista.com>]

Hello.

Florian Fainelli wrote:

> The DWVS0 board is a BCM6358-based board with an on-board OHCI controler.
>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> ---
> diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> index 0b1d60f..8bf2c01 100644
> --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> @@ -567,6 +567,27 @@ static struct board_info __initdata board_AGPFS0 = {
>  	.has_ohci0 = 1,
>  	.has_ehci0 = 1,
>  };
> +
> +static struct board_info __initdata board_DWVS0 = {
> +	.name				= "DWV-S0",
> +	.expected_cpu_id		= 0x6358,
> +
> +	.has_enet0			= 1,
> +	.has_enet1			= 1,
> +	.has_pci			= 1,
> +
> +	.enet0 = {
> +		.has_phy		= 1,
> +		.use_internal_phy	= 1,
> +	},
> +
> +	.enet1 = {
> +		.force_speed_100	= 1,
> +		.force_duplex_full	= 1,
> +	},
> +
> +	.has_ohci0 = 1,
>   

   Why it's not aligned with the rest of initializers?

WBR, Sergei