From: LiM <lim@brdo.cz>
To: Jan Hoogenraad <jan-conceptronic@hoogenraad.net>
Cc: thomas.schorpp@gmail.com,
Mauro Carvalho Chehab <mchehab@infradead.org>,
linux-media@vger.kernel.org, Antti Palosaari <crope@iki.fi>
Subject: Re: Help with RTL2832U DVB-T dongle (LeadTek WinFast DTV Dongle Mini)
Date: Tue, 09 Mar 2010 09:10:30 +0100 [thread overview]
Message-ID: <4B960276.9030302@brdo.cz> (raw)
In-Reply-To: <4B956830.6070508@hoogenraad.net>
Hi,
for information...i have the same dongle (LeadTek WinFast DTV Dongle
Mini - Bus 001 Device 003: ID 0413:6a03 Leadtek Research, Inc. )
and after compiled RTL2832U + change VID+PID in rtl2832u.h (i changed
USB_VID_GTEK + USB_PID_GTEK_WARM to leadtek`s 0413:6a03)
is tuner working! (me-tv + kaffeine)
[54444.033094] usb 1-2: new high speed USB device using ehci_hcd and
address 3
[54444.174858] usb 1-2: configuration #1 chosen from 1 choice
[54444.287045] dvb-usb: found a 'RT DTV 2832U' in warm state.
[54444.287056] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[54444.288707] DVB: registering new adapter (RT DTV 2832U)
[54444.289274] DVB: registering adapter 0 frontend 0 (Realtek RTL2832
DVB-T)...
[54444.289324] dvb-usb: RT DTV 2832U successfully initialized and connected.
[54444.289360] usbcore: registered new interface driver dvb_usb_rtl2832u
compilation is the same as instruction for msi digivox mini II v3.0
--cut ----
Installation of Realtek rtl2832u-based DVB-T-USB-Sticks:
sudo apt-get install unrar build-essential mercurial
mkdir digivox; cd digivox
hg clone http://linuxtv.org/hg/v4l-dvb <http://linuxtv.org/hg/v4l-dvb>
wget
http://media.ubuntuusers.de/forum/attachments/2103272/090730_RTL2832U_LINUX_Ver1.1.rar
<http://media.ubuntuusers.de/forum/attachments/2103272/090730_RTL2832U_LINUX_Ver1.1.rar>
unrar x -ep 090730_RTL2832U_LINUX_Ver1.1.rar
./v4l-dvb/linux/drivers/media/dvb/dvb-usb
cd v4l-dvb
for i in `find . -name *.pl`; do chmod +x $i ; done
gedit ./linux/drivers/media/dvb/dvb-usb/Makefile
(Insertion nearly to the end of file
<https://bugs.launchpad.net/me-tv/+bug/478439/file>:)
dvb-usb-rtl2832u-objs = demod_rtl2832.o dvbt_demod_base.o
dvbt_nim_base.o foundation.o math_mpi.o nim_rtl2832_mxl5007t.o
nim_rtl2832_fc2580.o nim_rtl2832_mt2266.o rtl2832u.o rtl2832u_fe.o
rtl2832u_io.o tuner_mxl5007t.o tuner_fc2580.o tuner_mt2266.o
tuner_tua9001.o nim_rtl2832_tua9001.o
obj-$(CONFIG_DVB_USB_RTL2832U) += dvb-usb-rtl2832u.o
gedit ./linux/drivers/media/dvb/dvb-usb/Kconfig
(Insertion to the end of file
<https://bugs.launchpad.net/me-tv/+bug/478439/file>:)
config DVB_USB_RTL2832U
tristate "Realtek RTL2832U DVB-T USB2.0 support"
depends on DVB_USB
help
Realtek RTL2832U DVB-T driver
gedit ./linux/drivers/media/dvb/dvb-usb/rtl2832u.c
(1. Remove // of line 12:)
//DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
(2. replace line 61-63 by:)
if ( ( 0==
dvb_usb_device_init(intf,&rtl2832u_1st_properties,THIS_MODULE,NULL,adapter_nr)
)||
( 0==
dvb_usb_device_init(intf,&rtl2832u_2nd_properties,THIS_MODULE,NULL,adapter_nr)
) ||
( 0==
dvb_usb_device_init(intf,&rtl2832u_3th_properties,THIS_MODULE,NULL,adapter_nr)
))
gedit ./linux/drivers/media/dvb/dvb-usb/tuner_tua9001.c
(search for 19.2 AND 20.48 and replace it by 19_2 AND 20_48:)
#elif defined(CRYSTAL_19.2_MHZ) /* Frequency 19.2 MHz */
#elif defined(CRYSTAL_19_2_MHZ) /* Frequency 19.2 MHz */
#elif defined(CRYSTAL_20.48_MHZ) /* Frequency 20,48 MHz */
#elif defined(CRYSTAL_20_48_MHZ) /* Frequency 20,48 MHz */
make
STRG^C after some secs.
gedit ./v4l/.config
(replace FIREDTV=m by FIREDTV=n:)
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV=n
make clean
make
sudo make install
--cut ----
Jan Hoogenraad napsal(a):
> Mauro:
>
> Can you remove the VERY OLD branch:
> http://linuxtv.org/hg/~mchehab/rtl2831/rev/d116540ebaab
> It is giving some confusion here.
>
> Thomas & Jan:
>
> I've got the RTL2831 code (mind the last digit) vetted off by LeadTek.
> For the rtl2832, I haven't had contact with them.
>
> Certainly, Jan could try any of the three archives.
> I know Antti has thoughts on the rtl2832, I'm sure he knows more.
>
> thomas schorpp wrote:
>> Jan Hoogenraad wrote:
>>> Antti has been working on drivers for the RTL283x.
>>>
>>> http://linuxtv.org/hg/~anttip/rtl2831u
>>> or
>>> http://linuxtv.org/hg/~anttip/qt1010/
>>
>> ~jhoogenraad/rtl2831-r2 rtl2831-r2 development repository: *known
>> working version* Jan Hoogenraad
>>
>> Should Jan Slaninka try it?
>>>
>>> If you have more information on the RTL2832, I'd be happy to add it at:
>>> http://www.linuxtv.org/wiki/index.php/Rtl2831_devices
>>
>> Nothing on the Realtek website yet.
>>
>>>
>>>
>>> Jan Slaninka wrote:
>>>> Hi,
>>>>
>>>> I'd like to ask for a support with getting LeadTek WindFast DTV Dongle
>>>> mini running on Linux. So far I was able to fetch latest v4l-dvb from
>>>> HG, and successfully compiled module dvb_usb_rtl2832u found in
>>
>>>> 090730_RTL2832U_LINUX_Ver1.1.rar
>>
>> Can be considered as GPL code then according to
>>
>> http://linuxtv.org/hg/~mchehab/rtl2831/rev/d116540ebaab
>>
>> Patch to make RTL2831U DVB-T USB2.0 DEVICE work, based on RealTek
>> version 080314
>>
>> ~mchehab/rtl2831 rtl2831 development repository with *RealTek GPL
>> code* for rtl2831 Mauro Carvalho Chehab 24 months ago
>>
>> ?
>>
>> y
>> tom
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
next prev parent reply other threads:[~2010-03-09 8:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-06 7:53 Help with RTL2832U DVB-T dongle (LeadTek WinFast DTV Dongle Mini) Jan Slaninka
2010-03-06 21:41 ` thomas schorpp
2010-03-07 7:19 ` Jan Hoogenraad
2010-03-07 16:41 ` thomas schorpp
2010-03-08 21:12 ` Jan Hoogenraad
2010-03-09 8:10 ` LiM [this message]
2010-03-09 18:37 ` thomas schorpp
2010-03-09 20:32 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B960276.9030302@brdo.cz \
--to=lim@brdo.cz \
--cc=crope@iki.fi \
--cc=jan-conceptronic@hoogenraad.net \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=thomas.schorpp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.