From mboxrd@z Thu Jan  1 00:00:00 1970
From: Malcolm Gillies <ath9k@ouabain.org>
Date: Sat, 13 Mar 2010 16:26:26 +1100
Subject: [ath9k-devel] ar9220/9223 failure
Message-ID: <4B9B2202.3060909@ouabain.org>
List-Id: <ath9k-devel.lists.ath9k.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: ath9k-devel@lists.ath9k.org

Hi,

I just bought a no-name ar9220/ar9223 dual-band mini-pci card, which
ath9k fails to load:

[   20.111549] ath9k: probe of 0000:02:02.0 failed with error -22

Any suggestions?

The card looks like one of these:

http://www.aliexpress.com/product-gs/284675837-Atheros-AR9223-AR9220-AGN-Mini-PCI-Wireless-antenna-wholesalers.html

lspci output:

02:02.0 Network controller: Atheros Communications Inc. Device 0029 (rev 01)

I'm running kernel 2.6.32 and compat-wireless-2.6.32.8

dmesg output is as follows

[   14.746495] ath9k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[   14.781627] ath9k: UNDEFINED -> AWAKE
[   14.781687] ath9k: serialize_regmode is 0
[   16.335777] ath9k: Read Magic = 0xA55A
[   16.335781] ath9k: need_swap = False.
[   16.335787] ath9k: Eeprom VER: 14, REV: 19
[   16.335791] ath9k: Initialize ANI
[   16.335800] ath9k: Setting OfdmErrBase = 0x00bffe0c
[   16.335804] ath9k: Setting cckErrBase = 0x00bfff38
[   16.335808] ath9k: Enable MIB counters
[   16.335825] ath9k: ini VAL: 5a508000  EEPROM: 13
[   16.335828] ath9k: PWDCLKIND: 1
[   16.335831] ath9k: final ini VAL: 5a508000
[   16.335834] ath9k: ini VAL: 5a508000  EEPROM: 13
[   16.335837] ath9k: PWDCLKIND: 1
[   16.335840] ath9k: final ini VAL: 5a508000
[   16.335843] ath9k: ini VAL: 5a508000  EEPROM: 13
[   16.335846] ath9k: PWDCLKIND: 1
[   16.335849] ath9k: final ini VAL: 5a508000
[   16.335852] ath9k: ini VAL: 5a508000  EEPROM: 13
[   16.335855] ath9k: PWDCLKIND: 1
[   16.335858] ath9k: final ini VAL: 5a508000
[   16.335861] ath9k: ini VAL: 5a508000  EEPROM: 13
[   16.335865] ath9k: PWDCLKIND: 1
[   16.335867] ath9k: final ini VAL: 5a508000
[   16.336609] ath9k: Rate:  1Mbps, ratecode: 27
[   16.336612] ath9k: Rate:  2Mbps, ratecode: 26
[   16.336615] ath9k: Rate:  5Mbps, ratecode: 25
[   16.336619] ath9k: Rate: 11Mbps, ratecode: 24
[   16.336622] ath9k: Rate:  6Mbps, ratecode: 11
[   16.336625] ath9k: Rate:  9Mbps, ratecode: 15
[   16.336628] ath9k: Rate: 12Mbps, ratecode: 10
[   16.336632] ath9k: Rate: 18Mbps, ratecode: 14
[   16.336635] ath9k: Rate: 24Mbps, ratecode:  9
[   16.336638] ath9k: Rate: 36Mbps, ratecode: 13
[   16.336641] ath9k: Rate: 48Mbps, ratecode:  8
[   16.336645] ath9k: Rate: 54Mbps, ratecode: 12
[   16.336648] ath9k: Rate:  6Mbps, ratecode: 11
[   16.336652] ath9k: Rate:  9Mbps, ratecode: 15
[   16.336655] ath9k: Rate: 12Mbps, ratecode: 10
[   16.336658] ath9k: Rate: 18Mbps, ratecode: 14
[   16.336661] ath9k: Rate: 24Mbps, ratecode:  9
[   16.336664] ath9k: Rate: 36Mbps, ratecode: 13
[   16.336668] ath9k: Rate: 48Mbps, ratecode:  8
[   16.336671] ath9k: Rate: 54Mbps, ratecode: 12
[   16.336675] ath9k: Setup TX queue: 9
[   16.336678] ath9k: Set queue properties for: 9
[   16.336682] ath9k: Setup TX queue: 8
[   16.336685] ath9k: Set queue properties for: 8
[   16.336690] ath9k: Set queue properties for: 8
[   16.336693] ath9k: Reset TX queue: 8
[   16.336706] ath9k: tx ok 0x0 err 0x0 desc 0x100 eol 0x100 urn 0x0
[   16.336714] ath9k: Setup TX queue: 0
[   16.336717] ath9k: Set queue properties for: 0
[   16.336720] ath9k: Setup TX queue: 1
[   16.336723] ath9k: Set queue properties for: 1
[   16.336726] ath9k: Setup TX queue: 2
[   16.336729] ath9k: Set queue properties for: 2
[   16.336732] ath9k: Setup TX queue: 3
[   16.336735] ath9k: Set queue properties for: 3
[   16.336745] ath: EEPROM regdomain: 0x28d
[   16.336747] ath: EEPROM indicates we should expect a direct regpair map
[   16.336751] ath: invalid regulatory domain/country code 0x28d
[   16.336754] ath: Invalid EEPROM contents