From: Lars Lindley <lindley@coyote.org>
To: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: greg KH <gregkh@suse.de>, Greg KH <greg@kroah.com>,
Pavel Machek <pavel@ucw.cz>,
devel@driverdev.osuosl.org,
kernel list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] staging: winbond: localpara.h whitespace and indentation fixes.
Date: Fri, 19 Mar 2010 00:00:59 +0100 [thread overview]
Message-ID: <4BA2B0AB.4070607@coyote.org> (raw)
In-Reply-To: <4BA25348.1080308@cs.helsinki.fi>
On 2010-03-18 17:22, Pekka Enberg wrote:
> Lars Lindley wrote:
>> +/* refer Bitmap2RateValue table */
>> +#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 /*
>> + * the bitmap value
>> + * of all the H/W
>> + * supported rates:
>> + * 1, 2, 5.5, 11,
>> + * 6, 9, 12, 18,
>> + * 24, 36, 48, 54
>> + */
>
> The comments look funny. You might want to move them above the #defines.
>
>> + u8 region; /* real region setting of the device */
>> + u8 Reserved_1[2];
>> +
>> +/* power-save variables */
>
> I think this wants to be moved one indentation level to the right.
>
Ok here's a patch that applies over the old one to fix this..
Hope it looks all right.. :)
/Lars
[PATCH] staging: winbond: localpara.h Moved around some comments
I moved some comments after pointers from Pekka Enberg.
Signed-off-by: Lars Lindley <lindley@coyote.org>
---
drivers/staging/winbond/localpara.h | 50 ++++++++++++++---------------------
1 files changed, 20 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/winbond/localpara.h b/drivers/staging/winbond/localpara.h
index f1e6b50..d798057 100644
--- a/drivers/staging/winbond/localpara.h
+++ b/drivers/staging/winbond/localpara.h
@@ -47,23 +47,13 @@
#define BAND_TYPE_OFDM_5 2
/* refer Bitmap2RateValue table */
-#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 /*
- * the bitmap value
- * of all the H/W
- * supported rates:
- * 1, 2, 5.5, 11,
- * 6, 9, 12, 18,
- * 24, 36, 48, 54
- */
-#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 /*
- * the bitmap value
- * of all the H/W
- * supported rates
- * except to non-OFDM
- * rates:
- * 6, 9, 12, 18,
- * 24, 36, 48, 54
- */
+
+/* the bitmap value of all the H/W supported rates: */
+/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
+#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66
+/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */
+/* 6, 9, 12, 18, 24, 36, 48, 54 */
+#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240
#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
@@ -143,7 +133,7 @@ struct wb_local_para {
u8 region; /* real region setting of the device */
u8 Reserved_1[2];
-/* power-save variables */
+ /* power-save variables */
u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */
u8 ATIMmode;
u8 ExcludeUnencrypted;
@@ -152,7 +142,7 @@ struct wb_local_para {
u8 boHasTxActivity;/* tx activity has occurred */
u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */
-/* Rate */
+ /* Rate */
u8 TxRateMode; /*
* Initial, input from Registry,
* may be updated by GUI
@@ -166,7 +156,7 @@ struct wb_local_para {
*/
u8 CurrentTxFallbackRate;
-/* for Rate handler */
+ /* for Rate handler */
u8 BRateSet[32]; /* basic rate set */
u8 SRateSet[32]; /* support rate set */
@@ -180,7 +170,7 @@ struct wb_local_para {
u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */
-/* For SME/MLME handler */
+ /* For SME/MLME handler */
u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */
u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */
@@ -204,7 +194,7 @@ struct wb_local_para {
u8 CWMin; /* 255: set according to 802.11 spec. */
u8 reserved2;
-/* 11G: */
+ /* 11G: */
u8 bMacOperationMode; /* operation in 802.11b or 802.11g */
u8 bSlotTimeMode; /* AUTO, s32 */
u8 bPreambleMode; /* AUTO, s32 */
@@ -218,11 +208,11 @@ struct wb_local_para {
u32 RSN_IE_Bitmap;
u32 RSN_OUI_Type;
-/* For the BSSID */
+ /* For the BSSID */
u8 HwBssid[MAC_ADDR_LENGTH + 2];
u32 HwBssidValid;
-/* For scan list */
+ /* For scan list */
u8 BssListCount; /* Total count of valid descriptor indexes */
u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */
u8 NoOfJoinerInIbss;
@@ -238,7 +228,7 @@ struct wb_local_para {
*/
u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
-/* General Statistics, count at Rx_handler or Tx_callback interrupt handler */
+ /* General Statistics, count at Rx_handler or Tx_callback interrupt handler */
u64 GS_XMIT_OK; /* Good Frames Transmitted */
u64 GS_RCV_OK; /* Good Frames Received */
u32 GS_RCV_ERROR; /* Frames received with crc error */
@@ -247,11 +237,11 @@ struct wb_local_para {
u32 GS_XMIT_ONE_COLLISION; /* one collision */
u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */
-/*
- * ================================================================
- * Statistics (no matter whether it had done successfully) -wkchen
- * ================================================================
- */
+ /*
+ * ================================================================
+ * Statistics (no matter whether it had done successfully) -wkchen
+ * ================================================================
+ */
u32 _NumRxMSDU;
u32 _NumTxMSDU;
u32 _dot11WEPExcludedCount;
--
1.7.0.2
next prev parent reply other threads:[~2010-03-18 23:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-16 8:21 [PATCH] staging: winbond: localpara.h whitespace and indentation fixes Lars Lindley
2010-03-18 16:22 ` Pekka Enberg
2010-03-18 23:00 ` Lars Lindley [this message]
2010-03-19 5:45 ` Pekka Enberg
2010-03-21 6:58 ` Pavel Machek
2010-04-28 22:50 ` Greg KH
2010-05-02 8:34 ` Lars Lindley
2010-05-03 18:45 ` Greg KH
2010-05-08 12:53 ` Lars Lindley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BA2B0AB.4070607@coyote.org \
--to=lindley@coyote.org \
--cc=devel@driverdev.osuosl.org \
--cc=greg@kroah.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=penberg@cs.helsinki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.