Re: Gentoo alsa output

[cdstealer <cdstealer@cdstealer.com>]

Hi Fengguang,
    I ran the command as requested:

$ speaker-test -Dhw:0,3 -c8 -twav

speaker-test 1.0.21

Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 8 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 16 to 4096
Period size range from 8 to 2048
Using max buffer size 4096
Periods = 4
was set period_size = 1024
was set buffer_size = 4096
 0 - Front Left
 4 - Center
 1 - Front Right
 7 - Side Right
 3 - Rear Right
 2 - Rear Left
 6 - Side Left
 5 - LFE
Time per period = 11.306881

Unfortunately there was no audio output. :(

Thanks
Steve

-------- Original Message  --------
Subject: Re: Gentoo alsa output
From: Wu Fengguang <fengguang.wu@intel.com>
To: cdstealer <cdstealer@cdstealer.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>, Shane W
<shane-alsa@csy.ca>
Date: Sun Mar 21 2010 12:41:32 GMT+0000 (BST)
> Hi cdstealer,
>
> It looks all sane with HDMI audio. Would you verify HDMI playback with
> command
>
>         speaker-test -Dhw:0,3 -c8 -twav
>
> ?
>
> Or are there any more concerns?
>
> Thanks,
> Fengguang
>
> On Sun, Mar 21, 2010 at 05:18:18PM +0800, cdstealer wrote:
>   
>> Hi fengguang,
>>     Many thanks for jumping on this.  I have run the script and uploaded the result to:
>>
>> http://www.alsa-project.org/db/?f=dbfb35a717aebac5b2650fb9dcf649e1a031ebc0
>>
>> If you need anything further, please don't hesitate to contact me.
>>
>> Kind regards
>> Steve
>>     
>