All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavan Savoy <pavan_savoy@ti.com>
To: randy.dunlap@oracle.com, gregkh@suse.de,
	linux-kernel@vger.kernel.org, alan@lxorguk.ukuu.org.uk
Subject: Re: [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc
Date: Mon, 22 Mar 2010 18:45:42 -0500	[thread overview]
Message-ID: <4BA80126.6010902@ti.com> (raw)

patch below....

 > _______________________________________
 > From: Randy Dunlap [randy.dunlap@oracle.com]
 > Sent: Tuesday, March 23, 2010 3:15 AM
 > To: Savoy, Pavan
 > Cc: gregkh@suse.de; alan@lxorguk.ukuu.org.uk; 
linux-kernel@vger.kernel.org
 > Subject: Re: [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST 
ldisc
 >
 > On 03/22/10 14:19, pavan_savoy@ti.com wrote:
 >> From: Pavan Savoy <pavan_savoy@ti.com>
 >>
 >> This change adds the Kconfig and Make file for TI's
 >> ST line discipline driver and the BlueZ driver for BT
 >> core of the TI BT/FM/GPS combo chip.
 >>
 >> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
 >> ---
 >>  drivers/misc/Kconfig        |    1 +
 >>  drivers/misc/Makefile       |    1 +
 >>  drivers/misc/ti-st/Kconfig  |   24 ++++++++++++++++++++++++
 >>  drivers/misc/ti-st/Makefile |    7 +++++++
 >>  4 files changed, 33 insertions(+), 0 deletions(-)
 >>  create mode 100644 drivers/misc/ti-st/Kconfig
 >>  create mode 100644 drivers/misc/ti-st/Makefile
 >>
 >> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
 >> index 625e3a6..c059bca 100644
 >> --- a/drivers/misc/Kconfig
 >> +++ b/drivers/misc/Kconfig
 >> @@ -344,5 +344,6 @@ source "drivers/misc/c2port/Kconfig"
 >>  source "drivers/misc/eeprom/Kconfig"
 >>  source "drivers/misc/cb710/Kconfig"
 >>  source "drivers/misc/iwmc3200top/Kconfig"
 >> +source "drivers/misc/ti-st/Kconfig"
 >>
 >>  endif # MISC_DEVICES
 >> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
 >> index c221917..021f282 100644
 >> --- a/drivers/misc/Makefile
 >> +++ b/drivers/misc/Makefile
 >> @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 >>  obj-$(CONFIG_HWLAT_DETECTOR) += hwlat_detector.o
 >>  obj-y                                += eeprom/
 >>  obj-y                                += cb710/
 >> +obj-y                                += ti-st/
 >> diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
 >> new file mode 100644
 >> index 0000000..18eea1c
 >> --- /dev/null
 >> +++ b/drivers/misc/ti-st/Kconfig
 >> @@ -0,0 +1,24 @@
 >> +#
 >> +# TI's shared transport line discipline and the protocol
 >> +# drivers (BT, FM and GPS)
 >> +#
 >> +menu "Texas Instruments shared transport line discipline"
 >> +    config TI_ST
 >> +    tristate "shared transport core driver"
 >> +    select FW_LOADER
 >> +    help
 >> +        This enables the shared transport core driver for TI
 >> +         BT / FM and GPS combo chips.This enables protocol drivers
 >> +         to register themselves with core and send data, the responses
 >> +         are returned to relevant protocol drivers based on their
 >> +         packet types.
 >
 > Please indent kconfig help text with one tab + 2 spaces.
 >
 >> +
 >> +    config ST_BT
 >> +    tristate "BlueZ bluetooth driver for ST"
 >
 > I'd be careful.  There are some places in the kernel tree where ST
 > means STMicroelectronics.
 >
 >> +    select BT
 >
 > That select looks unsafe.  You don't know that CONFIG_NET  is even 
enabled here,
 > do you?  Most drivers use "depends on BT" instead of "select BT" from 
my grepping.
 >
 >
 >
 >> +    select TI_ST
 >> +    help
 >> +       This enables the Bluetooth driver for TI BT/FM/GPS combo devices
 >
 > End sentence with period.
 >
 >> +       This makes use of shared transport line discipline core 
driver to
 >> +       communicate with the BT core of the combo chip.
 >> +endmenu
 >> diff --git a/drivers/misc/ti-st/Makefile b/drivers/misc/ti-st/Makefile
 >> new file mode 100644
 >> index 0000000..cff3770
 >> --- /dev/null
 >> +++ b/drivers/misc/ti-st/Makefile
 >> @@ -0,0 +1,7 @@
 >> +#
 >> +# Makefile for TI's shared transport line discipline
 >> +# and it's protocol drivers (BT, FM, GPS)
 >
 >          its
 >
 >> +#
 >> +obj-$(CONFIG_TI_ST) += st_drv.o
 >> +st_drv-objs                  := st_core.o st_kim.o st_ll.o
 >> +obj-$(CONFIG_ST_BT) += bt_drv.o
 >
 >
 > --
 > ~Randy
 >
 >
 >
 > From 91b326a876066f0724f08957ee446f6b6bbed40e Mon Sep 17 00:00:00 2001
 > From: Pavan Savoy <pavan_savoy@ti.com>
 > Date: Mon, 22 Mar 2010 16:40:19 -0400
 > Subject: [PATCH 2/7] drivers:misc: Kconfig, Makefile for TI's ST ldisc
 > This change adds the Kconfig and Make file for TI's
 > ST line discipline driver and the BlueZ driver for BT
 > core of the TI BT/FM/GPS combo chip.
 > Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
 > ---
 >  drivers/misc/Kconfig        |    1 +
 >  drivers/misc/Makefile       |    1 +
 >  drivers/misc/ti-st/Kconfig  |   24 ++++++++++++++++++++++++
 >  drivers/misc/ti-st/Makefile |    7 +++++++
 >  4 files changed, 33 insertions(+), 0 deletions(-)
 >  create mode 100644 drivers/misc/ti-st/Kconfig
 >  create mode 100644 drivers/misc/ti-st/Makefile
 > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
 > index 625e3a6..c059bca 100644
 > --- a/drivers/misc/Kconfig
 > +++ b/drivers/misc/Kconfig
 > @@ -344,5 +344,6 @@ source "drivers/misc/c2port/Kconfig"
 >  source "drivers/misc/eeprom/Kconfig"
 >  source "drivers/misc/cb710/Kconfig"
 >  source "drivers/misc/iwmc3200top/Kconfig"
 > +source "drivers/misc/ti-st/Kconfig"
 >
 >  endif # MISC_DEVICES
 > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
 > index c221917..021f282 100644
 > --- a/drivers/misc/Makefile
 > +++ b/drivers/misc/Makefile
 > @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 >  obj-$(CONFIG_HWLAT_DETECTOR) += hwlat_detector.o
 >  obj-y    += eeprom/
 >  obj-y    += cb710/
 > +obj-y    += ti-st/
 > diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
 > new file mode 100644
 > index 0000000..fe5b0e8
 > --- /dev/null
 > +++ b/drivers/misc/ti-st/Kconfig
 > @@ -0,0 +1,24 @@
 > +#
 > +# TI's shared transport line discipline and the protocol
 > +# drivers (BT, FM and GPS)
 > +#
 > +menu "Texas Instruments shared transport line discipline"
 > +    config TI_ST
 > +    tristate "shared transport core driver"
 > +    select FW_LOADER
 > +    help
 > +   This enables the shared transport core driver for TI
 > +   BT / FM and GPS combo chips.This enables protocol drivers
 > +   to register themselves with core and send data, the responses
 > +   are returned to relevant protocol drivers based on their
 > +   packet types.
 > +
 > +    config ST_BT
 > +    tristate "BlueZ bluetooth driver for ST"
 > +    depends on BT

OK.

 > +    select TI_ST
 > +    help
 > +   This enables the Bluetooth driver for TI BT/FM/GPS combo devices
 > +   This makes use of shared transport line discipline core driver to
 > +   communicate with the BT core of the combo chip.

There are no tabs above.  They appear to have been eaten (assuming that
they were there at some point).


 > +endmenu
 > diff --git a/drivers/misc/ti-st/Makefile b/drivers/misc/ti-st/Makefile
 > new file mode 100644
 > index 0000000..cff3770
 > --- /dev/null
 > +++ b/drivers/misc/ti-st/Makefile
 > @@ -0,0 +1,7 @@
 > +#
 > +# Makefile for TI's shared transport line discipline
 > +# and it's protocol drivers (BT, FM, GPS)

          ^^^^
should be "its"

 > +#
 > +obj-$(CONFIG_TI_ST) += st_drv.o
 > +st_drv-objs   := st_core.o st_kim.o st_ll.o
 > +obj-$(CONFIG_ST_BT) += bt_drv.o


 > PS:
 > If you still see problems with identation - blame my email editor 
(outlook express)

I guess that you'll need to do something about that.


-- 
~Randy


[Pavan]>>>>>>>>>>>>>>>
I suppose this should be fine ...



 From f12153a01e9f4a1ce2c381319fdfde60daeef461 Mon Sep 17 00:00:00 2001
From: Pavan Savoy <pavan_savoy@ti.com>
Date: Mon, 22 Mar 2010 16:40:19 -0400
Subject: [PATCH 2/7] drivers:misc: Kconfig, Makefile for TI's ST ldisc

This change adds the Kconfig and Make file for TI's
ST line discipline driver and the BlueZ driver for BT
core of the TI BT/FM/GPS combo chip.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
  drivers/misc/Kconfig        |    1 +
  drivers/misc/Makefile       |    1 +
  drivers/misc/ti-st/Kconfig  |   24 ++++++++++++++++++++++++
  drivers/misc/ti-st/Makefile |    7 +++++++
  4 files changed, 33 insertions(+), 0 deletions(-)
  create mode 100644 drivers/misc/ti-st/Kconfig
  create mode 100644 drivers/misc/ti-st/Makefile

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 625e3a6..c059bca 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -344,5 +344,6 @@ source "drivers/misc/c2port/Kconfig"
  source "drivers/misc/eeprom/Kconfig"
  source "drivers/misc/cb710/Kconfig"
  source "drivers/misc/iwmc3200top/Kconfig"
+source "drivers/misc/ti-st/Kconfig"

  endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c221917..021f282 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
  obj-$(CONFIG_HWLAT_DETECTOR)	+= hwlat_detector.o
  obj-y				+= eeprom/
  obj-y				+= cb710/
+obj-y				+= ti-st/
diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
new file mode 100644
index 0000000..fe5b0e8
--- /dev/null
+++ b/drivers/misc/ti-st/Kconfig
@@ -0,0 +1,24 @@
+#
+# TI's shared transport line discipline and the protocol
+# drivers (BT, FM and GPS)
+#
+menu "Texas Instruments shared transport line discipline"
+    config TI_ST
+    tristate "shared transport core driver"
+    select FW_LOADER
+    help
+	  This enables the shared transport core driver for TI
+	  BT / FM and GPS combo chips.This enables protocol drivers
+	  to register themselves with core and send data, the responses
+	  are returned to relevant protocol drivers based on their
+	  packet types.
+
+    config ST_BT
+    tristate "BlueZ bluetooth driver for ST"
+    depends on BT
+    select TI_ST
+    help
+	  This enables the Bluetooth driver for TI BT/FM/GPS combo devices
+	  This makes use of shared transport line discipline core driver to
+	  communicate with the BT core of the combo chip.
+endmenu
diff --git a/drivers/misc/ti-st/Makefile b/drivers/misc/ti-st/Makefile
new file mode 100644
index 0000000..ad9cff2
--- /dev/null
+++ b/drivers/misc/ti-st/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for TI's shared transport line discipline
+# and its protocol drivers (BT, FM, GPS)
+#
+obj-$(CONFIG_TI_ST) += st_drv.o
+st_drv-objs			:= st_core.o st_kim.o st_ll.o
+obj-$(CONFIG_ST_BT) += bt_drv.o
-- 
1.5.4.3


             reply	other threads:[~2010-03-22 23:46 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-22 23:45 Pavan Savoy [this message]
2010-03-23  0:09 ` [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc Randy Dunlap
  -- strict thread matches above, loose matches on Subject: below --
2010-03-23 15:55 Pavan Savoy
2010-03-23 16:04 ` Randy Dunlap
2010-03-23 15:10 Pavan Savoy
2010-03-23 15:23 ` Randy Dunlap
2010-03-22 21:19 [re-worked] New ldisc for WiLink7.0 pavan_savoy
2010-03-22 21:19 ` [PATCH 1/6] serial: TTY: new ldisc for TI BT/FM/GPS chips pavan_savoy
2010-03-22 21:19   ` [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc pavan_savoy
2010-03-22 21:34     ` Greg KH
2010-03-22 21:35     ` Greg KH
2010-03-23  0:07       ` Tilman Schmidt
2010-03-23 15:18       ` Alan Cox
2010-03-24  2:19         ` Greg KH
2010-03-22 21:45     ` Randy Dunlap
2010-03-22 22:37       ` Savoy, Pavan
2010-03-22 22:49         ` Randy Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4BA80126.6010902@ti.com \
    --to=pavan_savoy@ti.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=randy.dunlap@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.