From: william <kc@cobradevil.org>
To: linux-media@vger.kernel.org
Subject: Re: tevii s660 system slow/freeze
Date: Wed, 24 Mar 2010 06:46:06 +0100 [thread overview]
Message-ID: <4BA9A71E.6090309@cobradevil.org> (raw)
In-Reply-To: <54510.83.83.244.249.1269102017.squirrel@webmail.spothost.nl>
Update
it was a problem with the device itself.
I have send it back to my supplier for rma.
With kind regards
William
On 03/20/2010 05:20 PM, kc@cobradevil.org wrote:
> Dear mailinglist/Tevii,
>
> i have received a new tevii s660 yesterday.
> I have tried to use the device with scan but then my system freezes/slows
> down and i don't get any channels. Also when i create a channel list with
> my nova 2 hd and check if that works with vdr, then i removed the drivers
> from the nova card and plugged in the s660 and started vdr. But then still
> no picture only system freeze/slow down. I get nothing in the logs so it
> seems a driver issue.
>
> i have tried the drivers from the tevii site and also tried the 2.6.34rc1
> kernel from ubuntu. I also tried it on 3 different systems but to no
> avail.
>
> in dmesg i get:
> [16735.496800] usbcore: deregistering interface driver dw2102
> [16735.562114] dvb-usb: TeVii S660 USB successfully deinitialized and
> disconnected.
> [16737.219577] dvb-usb: found a 'TeVii S660 USB' in cold state, will try
> to load a firmware
> [16737.219593] usb 1-1: firmware: requesting dvb-usb-teviis660.fw
> [16737.229441] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw'
> [16737.229453] dw2102: start downloading DW210X firmware
> [16737.350052] dvb-usb: found a 'TeVii S660 USB' in warm state.
> [16737.350171] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [16737.350414] DVB: registering new adapter (TeVii S660 USB)
> [16747.590032] dvb-usb: MAC address: 00:18:bd:5c:55:bb
> [16747.650033] Only Zarlink VP310/MT312/ZL10313 are supported chips.
> [16748.074008] DS3000 chip version: 0.192 attached.
> [16748.074015] dw2102: Attached ds3000+ds2020!
> [16748.074017]
> [16748.074189] DVB: registering adapter 0 frontend 0 (Montage Technology
> DS3000/TS2020)...
> [16748.076014] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input11
> [16748.076312] dvb-usb: schedule remote query interval to 150 msecs.
> [16748.076327] dvb-usb: TeVii S660 USB successfully initialized and
> connected.
> [16748.076596] usbcore: registered new interface driver dw2102
>
>
> and after that i only see:
> [16748.224312] dw2102: query RC enter
> [16748.224320] dw2102: query RC start
> [16748.246317] dw2102: query RC end
> [16748.396311] dw2102: query RC enter
> [16748.396320] dw2102: query RC start
> [16748.415313] dw2102: query RC end
> [16748.561641] dw2102: query RC enter
> [16748.561650] dw2102: query RC start
> [16748.585317] dw2102: query RC end
>
>
> over and over just filling the logs. i saw that it was from/for the remote
> but it looks like debug messages.
>
> I have tried 3 different kernels 2.6.32/3/4rc1 but they all have the same
> issue with the driver from 15 march.
>
> What can be wrong?
> Any suggestions how i can troubleshoot this?
>
> With kind regards
> William van de Velde
>
>
> new tevii S660 system slow/freeze no channels linux
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
prev parent reply other threads:[~2010-03-24 5:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-20 16:20 tevii s660 system slow/freeze kc
2010-03-24 5:46 ` william [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BA9A71E.6090309@cobradevil.org \
--to=kc@cobradevil.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.