From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damien Borie Date: Thu, 25 Mar 2010 15:21:43 +0100 Subject: [Buildroot] Xorg configuration for XGI chip In-Reply-To: <4BAA35F5.7040607@arcor.de> References: <4BA3A72B.3010009@terawatt.fr> <4BA3AAC2.9050400@gmail.com> <4BA8E694.3080809@terawatt.fr> <4BAA0988.9050708@arcor.de> <4BAA2D77.1050402@terawatt.fr> <4BAA35F5.7040607@arcor.de> Message-ID: <4BAB7177.2030506@terawatt.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, Well thank you for your help. As I thought, the better mode for framebuffer is 800x600x8. No mode for depth 16. I don't understand why as the same device with same hardware, but with smaller screen, accept depth 16. I am blocked, so I think I'll try in the Xorg mailing list. Thanks again, Damien. Sebastian a ?crit : > Hallo, > > the video BIOS is not accessible for end-users, but you can try to > boot the kernel with "vga=ask" and then use "scan". You'll get a list > of video modes which are offered by your video BIOS. > > You need to configure the kernel to implement this feature; else you > can use any configuration tool (i.e. use a normal linux distribution > and then "hwinfo --framebuffer") to get the available video modes. > > The vesa driver should also output a list. > > The hsync and vsync parameters are used to specify the monitor's > capabilities; if you use a DDC-compatible monitor, you shouldn't need > them. > > Try without any options, maybe try with reading the webpage of the > SiS-driver; i personally don't like the driver, but that was the > system itself which was crap. > > You can always use a normal linux distribution on a PC, and configure > it down to your needs. If it works there, you can check what might be > different. > > The log itself looks as good as I can read it. Sorry if I can't help > you any more than this... > > Best regards, > > Sebastian > > Damien Borie schrieb: >> >> Thank for your help. >> I don't know how to access the video BIOS. I can only access >> Motherboard BIOS and there is nothing into for video parameters. >> >> I use startx command to launch X server and my xinitrc is the default >> one which launch twn, xclock and 3 xterm. When I use vesa, I can see >> them. But, as I don't get any error, maybe the server is really >> running and there is only a bad parameter or something like that. >> My log file is a bit log, but here we go. The only thing strange is >> an memory error when I interrupt (at the end). I don't know the >> cause, but we think maybe we must set memory value for video somewhere. >> Another theory : the hsync range and vrefresh range are default, and >> I don't know how to find the good values. >> >> X.Org X Server 1.7.1 >> Release Date: 2009-10-23 >> X Protocol Version 11, Revision 0 >> Build Operating System: Linux 2.6.25-2-686 i686 >> Current Operating System: Linux matrix5 2.6.32 #1 PREEMPT Tue Mar 23 >> 11:15:59 CET 2010 i586 >> Kernel command line: root=/dev/hda2 vga=769 BOOT_IMAGE=bzImage >> Build Date: 22 March 2010 05:55:06PM >> >> Current version of pixman: 0.17.4 >> Before reporting problems, check http://wiki.x.org >> to make sure that you have the latest version. >> Markers: (--) probed, (**) from config file, (==) default setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> (==) Log file: "/usr/var/log/Xorg.0.log", Time: Wed Mar 24 23:07:46 2010 >> (==) Using config file: "/etc/X11/xorg.conf" >> (==) ServerLayout "Simple Layout" >> (**) |-->Screen "Screen0" (0) >> (**) | |-->Monitor "Monitor XGI" >> (==) No device specified for screen "Screen0". >> Using the first device section listed. >> (**) | |-->Device "Volari z9s" >> (**) |-->Input Device "Mouse1" >> (**) |-->Input Device "Keyboard1" >> (==) Not automatically adding devices >> (==) Not automatically enabling devices >> (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist. >> Entry deleted from font path. >> (WW) The directory "/usr/lib/X11/fonts/TTF/" does not exist. >> Entry deleted from font path. >> (WW) The directory "/usr/lib/X11/fonts/OTF" does not exist. >> Entry deleted from font path. >> (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist. >> Entry deleted from font path. >> (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist. >> Entry deleted from font path. >> (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist. >> Entry deleted from font path. >> (**) FontPath set to: >> /usr/share/fonts/X11/misc/ >> (==) ModulePath set to "/usr/lib/xorg/modules" >> (II) Loader magic: 0x8196b60 >> (II) Module ABI versions: >> X.Org ANSI C Emulation: 0.4 >> X.Org Video Driver: 6.0 >> X.Org XInput driver : 7.0 >> X.Org Server Extension : 2.0 >> (--) using VT number 3 >> >> (--) PCI:*(0:0:3:0) 18ca:0020:18ca:0020 rev 0, Mem @ >> 0xf8000000/67108864, 0xfefc0000/262144, I/O @ 0x0000df80/128 >> (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or >> directory) >> (II) "extmod" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "dbe" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "glx" will be loaded by default. >> (II) "dri" will be loaded by default. >> (II) LoadModule: "dbe" >> (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so >> (II) Module dbe: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.0.0 >> Module class: X.Org Server Extension >> ABI class: X.Org Server Extension, version 2.0 >> (II) Loading extension DOUBLE-BUFFER >> (II) LoadModule: "extmod" >> (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so >> (II) Module extmod: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.0.0 >> Module class: X.Org Server Extension >> ABI class: X.Org Server Extension, version 2.0 >> (II) Loading extension MIT-SCREEN-SAVER >> (II) Loading extension XFree86-VidModeExtension >> (II) Loading extension DPMS >> (II) Loading extension XVideo >> (II) Loading extension XVideo-MotionCompensation >> (II) Loading extension X-Resource >> (II) LoadModule: "extmod" >> (II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so >> (II) Loading extension MIT-SCREEN-SAVER >> (II) Loading extension XFree86-VidModeExtension >> (II) Loading extension XFree86-DGA >> (II) Loading extension DPMS >> (II) Loading extension XVideo >> (II) Loading extension XVideo-MotionCompensation >> (II) Loading extension X-Resource >> (II) LoadModule: "glx" >> (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >> (II) Module glx: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.0.0 >> ABI class: X.Org Server Extension, version 2.0 >> (==) AIGLX enabled >> (II) Loading extension GLX >> (II) LoadModule: "dri" >> (II) Loading /usr/lib/xorg/modules/extensions/libdri.so >> (II) Module dri: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.0.0 >> ABI class: X.Org Server Extension, version 2.0 >> (II) Loading extension XFree86-DRI >> (II) LoadModule: "sis" >> (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so >> (II) Module sis: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 0.10.2 >> Module class: X.Org Video Driver >> ABI class: X.Org Video Driver, version 6.0 >> (II) LoadModule: "mouse" >> (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so >> (II) Module mouse: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.5.0 >> Module class: X.Org XInput Driver >> ABI class: X.Org XInput driver, version 7.0 >> (II) LoadModule: "kbd" >> (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so >> (II) Module kbd: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.4.0 >> Module class: X.Org XInput Driver >> ABI class: X.Org XInput driver, version 7.0 >> (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, >> SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, >> SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), >> >> SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX], >> SIS340 >> (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), >> Volari V3XT/V5/V8/Duo (XG40) >> (II) Primary Device is: PCI 00 at 00:03:0 >> (WW) Falling back to old probe method for sis >> (--) Chipset Volari Z7 (XG20) found >> (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.7.1.0) >> (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer >> and others >> (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml >> (II) SIS(0): *** for documentation and updates. >> (--) SIS(0): sisfb not found >> (--) SIS(0): Relocated I/O registers at 0xDF80 >> (WW) System lacks support for changing MTRRs >> (II) Loading sub module "ramdac" >> (II) LoadModule: "ramdac" >> (II) Module "ramdac" already built-in >> (**) SIS(0): Depth 8, (--) framebuffer bpp 8 >> (==) SIS(0): Default visual is PseudoColor >> (--) SIS(0): Video BIOS version "1.09.05" found (XGI data layout) >> (**) SIS(0): Option "DRI" "off" >> (**) SIS(0): Option "BenchmarkMemcpy" "no" >> (**) SIS(0): Option "UseSSE" "on" >> (==) SIS(0): Using XAA acceleration architecture >> (==) SIS(0): Using HW cursor >> (II) SIS(0): Using VRAM command queue, size 128k >> (==) SIS(0): Hotkey display switching is enabled >> (==) SIS(0): SiSCtrl utility interface is disabled >> (II) SIS(0): For information on SiSCtrl, see >> http://www.winischhofer.at/linuxsispart1.shtml#sisctrl >> (**) SIS(0): Will not benchmark methods for system RAM to video RAM >> transfers >> (**) SIS(0): Will eventually use SSE CPU instructions >> (**) SIS(0): DRI disabled >> (--) SIS(0): DRAM type: Single channel DDR2x SDRAM >> (--) SIS(0): Memory clock: 248.178 MHz >> (--) SIS(0): DRAM bus width: 16 bit >> (--) SIS(0): Linear framebuffer at 0xF8000000 >> (--) SIS(0): MMIO registers at 0xFEFC0000 (size 64K) >> (--) SIS(0): VideoRAM: 32768 KB >> (II) SIS(0): Using 32608K of framebuffer memory at offset 0K >> (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) >> (II) SIS(0): Gamma correction is enabled >> (--) SIS(0): Memory bandwidth at 8 bpp is 496.356 MHz >> (II) Loading sub module "ddc" >> (II) LoadModule: "ddc" >> (II) Module "ddc" already built-in >> (--) SIS(0): CRT1 DDC probing failed >> (II) Loading sub module "ddc" >> (II) LoadModule: "ddc" >> (II) Module "ddc" already built-in >> (II) Loading sub module "vbe" >> (II) LoadModule: "vbe" >> (II) Loading /usr/lib/xorg/modules/libvbe.so >> (II) Module vbe: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.1.0 >> ABI class: X.Org Video Driver, version 6.0 >> (II) Loading sub module "int10" >> (II) LoadModule: "int10" >> (II) Loading /usr/lib/xorg/modules/libint10.so >> (II) Module int10: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.0.0 >> ABI class: X.Org Video Driver, version 6.0 >> (II) SIS(0): initializing int10 >> (II) SIS(0): Primary V_BIOS segment is: 0xc000 >> (II) SIS(0): VESA BIOS detected >> (II) SIS(0): VESA VBE Version 3.0 >> (II) SIS(0): VESA VBE Total Mem: 32768 kB >> (II) SIS(0): VESA VBE OEM: XGI >> (II) SIS(0): VESA VBE OEM Software Rev: 1.0 >> (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc. >> (II) SIS(0): VESA VBE OEM Product: Volari Z9s >> (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05 >> (II) Loading sub module "ddc" >> (II) LoadModule: "ddc" >> (II) Module "ddc" already built-in >> (II) SIS(0): VESA VBE DDC supported >> (II) SIS(0): VESA VBE DDC Level none >> (II) SIS(0): VESA VBE DDC transfer in appr. 0 sec. >> (II) SIS(0): VESA VBE DDC read failed >> (==) SIS(0): Min pixel clock is 10 MHz >> (--) SIS(0): Max pixel clock is 166 MHz >> (II) SIS(0): Replaced entire mode list with built-in modes >> (II) SIS(0): Using real widescreen modes for CRT1 VGA devices >> (II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule >> (II) SIS(0): "Unknown reason" in the following list means that the mode >> (II) SIS(0): is not supported on the chipset/bridge/current output >> device. >> (II) SIS(0): Monitor XGI: Using default hsync range of 31.50-37.90 kHz >> (II) SIS(0): Monitor XGI: Using default vrefresh range of 50.00-70.00 Hz >> (II) SIS(0): Clock range: 10.00 to 166.00 MHz >> (II) SIS(0): Not using default mode "800x600" (hsync out of range) >> (II) SIS(0): Not using default mode "800x600" (hsync out of range) >> (II) SIS(0): Not using default mode "800x600" (hsync out of range) >> (II) SIS(0): Not using default mode "800x600" (hsync out of range) >> (II) SIS(0): Not using default mode "800x600" (hsync out of range) >> (II) SIS(0): Not using default mode "800x600" (hsync out of range) >> (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) >> (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) >> (II) SIS(0): Not using default mode "640x480" (hsync out of range) >> (II) SIS(0): Not using default mode "640x480" (hsync out of range) >> (II) SIS(0): Not using default mode "640x480" (hsync out of range) >> (II) SIS(0): Not using default mode "640x480" (hsync out of range) >> (II) SIS(0): Not using default mode "640x480" (hsync out of range) >> (II) SIS(0): Not using default mode "640x400" (vrefresh out of range) >> (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) >> (II) SIS(0): Not using default mode "1024x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) >> (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) >> (II) SIS(0): Not using default mode "1600x1200" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1600x1200" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1600x1200" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1600x1200" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1600x1200" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1600x1200" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "320x200" (vrefresh out of range) >> (II) SIS(0): Not using default mode "512x384" (hsync out of range) >> (II) SIS(0): Not using default mode "1920x1440" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1920x1440" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1920x1440" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1920x1440" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1920x1440" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "1920x1440" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "2048x1536" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "2048x1536" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "2048x1536" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "2048x1536" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "2048x1536" (bad mode >> clock/interlace/doublescan) >> (II) SIS(0): Not using default mode "800x480" (hsync out of range) >> (II) SIS(0): Not using default mode "800x480" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x576" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x576" (hsync out of range) >> (II) SIS(0): Not using default mode "1024x576" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x720" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x720" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x720" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x960" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x960" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) >> (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) >> (II) SIS(0): Not using default mode "1152x864" (hsync out of range) >> (II) SIS(0): Not using default mode "1152x864" (hsync out of range) >> (II) SIS(0): Not using default mode "1152x864" (hsync out of range) >> (II) SIS(0): Not using default mode "848x480" (hsync out of range) >> (II) SIS(0): Not using default mode "848x480" (hsync out of range) >> (II) SIS(0): Not using default mode "856x480" (hsync out of range) >> (II) SIS(0): Not using default mode "1360x768" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x800" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x800" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x800" (hsync out of range) >> (II) SIS(0): Not using default mode "1680x1050" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x854" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x854" (hsync out of range) >> (II) SIS(0): Not using default mode "1280x854" (hsync out of range) >> (II) SIS(0): Not using default mode "960x600" (width too large for >> virtual size) >> (II) SIS(0): Not using default mode "960x540" (width too large for >> virtual size) >> (II) SIS(0): Not using default mode "856x480" (width too large for >> virtual size) >> (--) SIS(0): Virtual size is 800x600 (pitch 800) >> (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz >> (II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600 >> 601 605 628 +hsync +vsync (37.9 kHz) >> (**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz >> (II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600 >> 601 603 625 +hsync +vsync (35.2 kHz) >> (**) SIS(0): Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz >> (II) SIS(0): Modeline "768x576"x60.1 35.00 768 792 872 976 576 >> 578 581 597 +hsync +vsync (35.9 kHz) >> (**) SIS(0): Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz >> (II) SIS(0): Modeline "720x576"x60.1 32.73 720 744 816 912 576 >> 578 581 597 +hsync +vsync (35.9 kHz) >> (**) SIS(0): Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz >> (II) SIS(0): Modeline "800x480"x60.0 39.77 800 840 968 1056 480 >> 552 556 628 +hsync +vsync (37.7 kHz) >> (**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz >> (II) SIS(0): Modeline "720x480"x61.0 28.28 720 728 840 896 480 >> 490 492 517 -hsync -vsync (31.6 kHz) >> (**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz >> (II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480 >> 490 492 525 -hsync -vsync (31.3 kHz) >> (**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) >> (II) SIS(0): Modeline "400x300"x60.3 19.98 400 416 480 528 300 >> 300 302 314 doublescan +hsync +vsync (37.9 kHz) >> (**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D) >> (II) SIS(0): Modeline "320x240"x60.7 12.53 320 328 376 400 240 >> 245 246 258 doublescan -hsync -vsync (31.3 kHz) >> (==) SIS(0): DPI set to (96, 96) >> (II) Loading sub module "fb" >> (II) LoadModule: "fb" >> (II) Loading /usr/lib/xorg/modules/libfb.so >> (II) Module fb: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.0.0 >> ABI class: X.Org ANSI C Emulation, version 0.4 >> (II) Loading sub module "xaa" >> (II) LoadModule: "xaa" >> (II) Loading /usr/lib/xorg/modules/libxaa.so >> (II) Module xaa: vendor="X.Org Foundation" >> compiled for 1.7.1, module version = 1.2.1 >> ABI class: X.Org Video Driver, version 6.0 >> (II) SIS(0): 2D acceleration enabled >> (II) Loading sub module "vbe" >> (II) LoadModule: "vbe" >> (II) Reloading /usr/lib/xorg/modules/libvbe.so >> (II) Loading sub module "int10" >> (II) LoadModule: "int10" >> (II) Reloading /usr/lib/xorg/modules/libint10.so >> (II) SIS(0): initializing int10 >> (II) SIS(0): Primary V_BIOS segment is: 0xc000 >> (II) SIS(0): VESA BIOS detected >> (II) SIS(0): VESA VBE Version 3.0 >> (II) SIS(0): VESA VBE Total Mem: 32768 kB >> (II) SIS(0): VESA VBE OEM: XGI >> (II) SIS(0): VESA VBE OEM Software Rev: 1.0 >> (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc. >> (II) SIS(0): VESA VBE OEM Product: Volari Z9s >> (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05 >> (II) SIS(0): Setting standard mode 0x30 >> (II) SIS(0): Framebuffer from (0,0) to (799,32766) >> (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) >> Screen to screen bit blits >> Solid filled rectangles >> 8x8 mono pattern filled rectangles >> 8x8 color pattern filled rectangles >> Solid Lines >> Dashed Lines >> Setting up tile and stipple cache: >> 32 128x128 slots >> 32 256x256 slots >> 16 512x512 slots >> 32 8x8 color pattern slots >> (==) SIS(0): Backing store disabled >> (==) SIS(0): Silken mouse enabled >> (==) SIS(0): DPMS enabled >> (II) SIS(0): Initialized SISCTRL extension version 0.1 >> (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 >> (==) RandR enabled >> (II) Initializing built-in extension Generic Event Extension >> (II) Initializing built-in extension SHAPE >> (II) Initializing built-in extension MIT-SHM >> (II) Initializing built-in extension XInputExtension >> (II) Initializing built-in extension XTEST >> (II) Initializing built-in extension BIG-REQUESTS >> (II) Initializing built-in extension SYNC >> (II) Initializing built-in extension XKEYBOARD >> (II) Initializing built-in extension XC-MISC >> (II) Initializing built-in extension XINERAMA >> (II) Initializing built-in extension XFIXES >> (II) Initializing built-in extension RENDER >> (II) Initializing built-in extension RANDR >> (II) Initializing built-in extension COMPOSITE >> (II) Initializing built-in extension DAMAGE >> (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed >> (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such >> file or directory) >> (EE) GLX: could not load software renderer >> (II) GLX: no usable GL providers found for screen 0 >> (**) Option "Protocol" "auto" >> (**) Option "Device" "/dev/event2" >> (II) Mouse1: Setting mouse protocol to "PS/2" >> (**) Mouse1: Device: "/dev/event2" >> (**) Mouse1: Protocol: "auto" >> (**) Option "CorePointer" >> (**) Mouse1: always reports core events >> (**) Option "Device" "/dev/event2" >> (**) Option "Emulate3Buttons" "false" >> (**) Option "ZAxisMapping" "4 5 6 7" >> (**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7 >> (**) Mouse1: Buttons: 11 >> (**) Mouse1: Sensitivity: 1 >> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) >> (**) Mouse1: (accel) keeping acceleration scheme 1 >> (**) Mouse1: (accel) acceleration profile 0 >> (II) Mouse1: Setting mouse protocol to "PS/2" >> (**) Option "CoreKeyboard" >> (**) Keyboard1: always reports core events >> (**) Option "Protocol" "standard" >> (**) Keyboard1: Protocol: standard >> (**) Option "XkbRules" "base" >> (**) Keyboard1: XkbRules: "base" >> (**) Option "XkbModel" "pc105" >> (**) Keyboard1: XkbModel: "pc105" >> (**) Option "XkbLayout" "fr" >> (**) Keyboard1: XkbLayout: "fr" >> (**) Option "XkbVariant" "nodeadkeys" >> (**) Keyboard1: XkbVariant: "nodeadkeys" >> (**) Option "CustomKeycodes" "off" >> (**) Keyboard1: CustomKeycodes disabled >> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) >> (II) UnloadModule: "mouse" >> (II) UnloadModule: "kbd" >> (II) SIS(0): Restoring by setting old mode 0x2e >> (WW) SIS(0): xf86UnMapVidMem: cannot find region for >> [0xb7137000,0x10000] >> (WW) SIS(0): xf86UnMapVidMem: cannot find region for >> [0xb5137000,0x2000000] >> >> Thanks, >> Damien. > > -- Damien Borie TERAWATT / AENERGIA S.A.S. ZA DUBOSCOA 64990 Villefranque FRANCE tel : +33 (0)5 59 44 26 08 fax : +33 (0)5 59 31 15 11