From: Joe Ceklosky <jfceklosky@gmail.com>
To: linux-ide@vger.kernel.org
Subject: Failed Flush Cache on Intel SS4200-e
Date: Sun, 28 Mar 2010 20:29:21 -0400 [thread overview]
Message-ID: <4BAFF461.9070909@gmail.com> (raw)
I have been working with an Intel SS4200-e using the libata SATA drivers
in a Fedora 12
kernel. I have 4 Samsung 250's in a software Raid 5 config.
While running an rsync I sometimes get the following on two different
drives:
The drives are fine as far as I know.
The first time was drive 3, this was from drive 4.
Anyone with any thoughts on this?
kernel messages:
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: FLUSH CACHE EXT
ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:0c:ba:2d:40/00:00:19:00:00/40 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
end_request: I/O error, dev sdd, sector 488391834
md: super_written gets error=-5, uptodate=0
raid5: Disk failure on sdd2, disabling device.
raid5: Operation continuing on 3 devices.
ata4: EH complete
RAID5 conf printout:
--- rd:4 wd:3
disk 0, o:1, dev:sda2
disk 1, o:1, dev:sdb2
disk 2, o:1, dev:sdc2
disk 3, o:0, dev:sdd2
RAID5 conf printout:
--- rd:4 wd:3
disk 0, o:1, dev:sda2
disk 1, o:1, dev:sdb2
disk 2, o:1, dev:sdc2
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000
KB/sec) for data-check.
md: using 128k window, over a total of 233705472 blocks.
md: md0: data-check done.
reply other threads:[~2010-03-29 0:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BAFF461.9070909@gmail.com \
--to=jfceklosky@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.