From: Michal Simek <michal.simek@petalogix.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Eric Dumazet <eric.dumazet@gmail.com>,
LKML <linux-kernel@vger.kernel.org>,
John Williams <john.williams@petalogix.com>,
netdev@vger.kernel.org, Grant Likely <grant.likely@secretlab.ca>,
John Linn <John.Linn@xilinx.com>,
"Steven J. Magnani" <steve@digidescorp.com>,
Arnd Bergmann <arnd@arndb.de>,
akpm@linux-foundation.org
Subject: Re: Network performance - iperf
Date: Mon, 29 Mar 2010 17:27:29 +0200 [thread overview]
Message-ID: <4BB0C6E1.2090606@petalogix.com> (raw)
In-Reply-To: <4BB0BF28.5090505@petalogix.com>
Michal Simek wrote:
> Eric Dumazet wrote:
>> Le lundi 29 mars 2010 à 13:33 +0200, Michal Simek a écrit :
>>
>>> Do you have any idea howto improve TCP/UDP performance in general?
>>> Or tests which can point me on weak places.
>>
>> Could you post "netstat -s" on your receiver, after fresh boot and your
>> iperf session, for 32 MB and 256 MB ram case ?
>>
>
> I am not sure if is helpful but look below.
>
Sorry I forget to c&p that second part. :-(
Look below.
Michal
32MB
~ # cat /proc/meminfo | head -n 1
MemTotal: 30024 kB
~ # iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 6] local 192.168.0.10 port 5001 connected with 192.168.0.101 port 43577
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-50.0 sec 78.0 MBytes 13.1 Mbits/sec
~ # ./netstat -s
Ip:
56596 total packets received
0 forwarded
0 incoming packets discarded
56596 incoming packets delivered
15752 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
0 active connections openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
56596 segments received
15752 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
0 packets received
0 packets to unknown port received.
0 packet receive errors
0 packets sent
RcvbufErrors: 0
SndbufErrors: 0
UdpLite:
InDatagrams: 0
NoPorts: 0
InErrors: 0
OutDatagrams: 0
RcvbufErrors: 0
SndbufErrors: 0
error parsing /proc/net/snmp: Success
256MB
~ # cat /proc/meminfo | head -n 1
MemTotal: 257212 kB
~ # iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 6] local 192.168.0.10 port 5001 connected with 192.168.0.101 port 46069
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-50.2 sec 19.5 MBytes 3.26 Mbits/sec
~ # ./netstat -s
Ip:
14163 total packets received
0 forwarded
0 incoming packets discarded
14163 incoming packets delivered
5209 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
0 active connections openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
14163 segments received
5209 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
0 packets received
0 packets to unknown port received.
0 packet receive errors
0 packets sent
RcvbufErrors: 0
SndbufErrors: 0
UdpLite:
InDatagrams: 0
NoPorts: 0
InErrors: 0
OutDatagrams: 0
RcvbufErrors: 0
SndbufErrors: 0
error parsing /proc/net/snmp: Success
--
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
next prev parent reply other threads:[~2010-03-29 15:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-29 11:33 Network performance - iperf Michal Simek
2010-03-29 12:16 ` Eric Dumazet
2010-03-29 14:54 ` Michal Simek
2010-03-29 15:27 ` Michal Simek [this message]
2010-03-29 17:45 ` Eric Dumazet
2010-03-30 9:34 ` Michal Simek
2010-03-30 12:11 ` Steve Magnani
2010-03-30 12:41 ` Eric Dumazet
2010-03-29 16:47 ` Rick Jones
2010-03-29 16:57 ` Rick Jones
2010-03-29 20:07 ` Eric Dumazet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BB0C6E1.2090606@petalogix.com \
--to=michal.simek@petalogix.com \
--cc=John.Linn@xilinx.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=eric.dumazet@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=john.williams@petalogix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=steve@digidescorp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.