[U-Boot] [PATCH] mpc512x_fec: Move PHY initialization from probe into init routine.

[Ben Warren <biggerbadderben@gmail.com>]

Hi Detlev,

On 4/1/2010 6:45 AM, Detlev Zundel wrote:
> This saves the autonegotation delay when not using ethernet in U-Boot
>
> Signed-off-by: Detlev Zundel<dzu@denx.de>
> ---
>   drivers/net/mpc512x_fec.c |   30 ++++++++++--------------------
>   1 files changed, 10 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
> index 1bb3d5d..1a34d46 100644
> --- a/drivers/net/mpc512x_fec.c
> +++ b/drivers/net/mpc512x_fec.c
> @@ -221,11 +221,20 @@ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
>   static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
>   {
>   	mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
> +	char env_enetaddr[6];
>
>   #if (DEBUG&  0x1)
>   	printf ("mpc512x_fec_init... Begin\n");
>   #endif
>
> +	if (eth_getenv_enetaddr("ethaddr", env_enetaddr)) {
> +		mpc512x_fec_set_hwaddr (fec, env_enetaddr);
> +		out_be32(&fec->eth->gaddr1, 0x00000000);
> +		out_be32(&fec->eth->gaddr2, 0x00000000);
> +	}
>    
By the time this code is called, the common networking code has already 
figured out the best MAC address to use and has stuffed it into 
dev->enetaddr.  Please use that instead.
> +
> +	mpc512x_fec_init_phy (dev, bis);
> +
>   	/* Set interrupt mask register */
>   	out_be32(&fec->eth->imask, 0x00000000);
>
> @@ -612,7 +621,7 @@ int mpc512x_fec_initialize (bd_t * bis)
>   	mpc512x_fec_priv *fec;
>   	struct eth_device *dev;
>   	int i;
> -	char *tmp, *end, env_enetaddr[6];
> +	char *tmp, *end;
>   	void * bd;
>
>   	fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
> @@ -663,25 +672,6 @@ int mpc512x_fec_initialize (bd_t * bis)
>   	 */
>   	out_be32(&fec->eth->ievent, 0xffffffff);
>
> -	/*
> -	 * Try to set the mac address now. The fec mac address is
> -	 * a garbage after reset. When not using fec for booting
> -	 * the Linux fec driver will try to work with this garbage.
> -	 */
> -	tmp = getenv ("ethaddr");
> -	if (tmp) {
> -		for (i=0; i<6; i++) {
> -			env_enetaddr[i] = tmp ? simple_strtoul (tmp,&end, 16) : 0;
> -			if (tmp)
> -				tmp = (*end) ? end+1 : end;
> -		}
> -		mpc512x_fec_set_hwaddr (fec, env_enetaddr);
> -		out_be32(&fec->eth->gaddr1, 0x00000000);
> -		out_be32(&fec->eth->gaddr2, 0x00000000);
> -	}
> -
> -	mpc512x_fec_init_phy (dev, bis);
> -
>   	return 1;
>   }
>
>    
regards,
Ben