Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier <didier.spaier-GqzDj6/B2j8@public.gmane.org>]

Thansk for your answer, kernel logs are attached.

Please note that this time I tried with a 2.6.32.2 kernel (nouveau works under X).

Marcin Slusarz wrote:
> On Mon, Apr 05, 2010 at 10:59:40PM +0200, Didier Spaier wrote:
>> Hi all,
>>
>> new to this list ;)
>>
>> I have a Lenovo Thinkpad T61. lspci|grep VGA says:
>> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
>>
>> I have Slacware64-13.0 and Slackware64-current installed.
>>
>> Nouveau is modularized in all my kernels for -current.
>>
>> A problem arise even if I don't want to use nouveau under X: unless nouveau be blacklisted in /etc/modprobe.d/blacklist.conf at startup,
>> - when using one of the VESA modes at startup after a while screen goes blank and I get a warning in syslog e.g:
>>    Apr  2 18:58:56 darkstar kernel: fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver,
> 
> It should work. Please provide full kernel log.

Kernel logs are attached for both cases. Unfortunately I don't see many differences ??

> 
>> - no problem when using a VGA mode (text only),
> 
> But Nouveau framebuffer activates without errors, right?
> 
Yes, switching to nouveau framebuffer OK in the latter case but not in the former

>> this disregarding which X driver I use afterwards (I always start in console mode).
>>
>> But according to this page:
>> http://nouveau.freedesktop.org/wiki/KernelModeSetting
>> I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?
>>
>> I tried with modules shipped in vanilla 2.6.33.1 as well as the last Nouveau kernel repository pulled from git: no luck in both cases.
>>
>> I know there are easy workarounds: either use "VGA=ask", "VGA=ext" or "VGA=normal" as a lilo.conf option or blacklist nouveau -- which doesn't hurt anyway as nouveau will be loaded at X startup anyhow.
>>
>> But this is still is an annoyance for newcomers as when they are trapped all they can do if they have a VESA mode in lilo.conf is launch another system or live CD/DVD and either edit lilo.conf and run lilo again or edit blacklist.conf to blacklist nouveau.
>>
>> But still, before kindly requesting Patrick Volkerding to blacklist nouveau in -current for the time being, I wanted to now of another way to go if possible.
>>
>> Thanks in advance for your answers,
>>
>> Didier
>