Re: [PATCH][RFC 12/12/1/5] SCST sysfs rules

[Vladislav Bolkhovitin <vst@vlnb.net>]

This patch contains SCST sysfs rules.

Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net>
---
 SysfsRules |  795 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 795 insertions(+)

diff -uprN orig/linux-2.6.33/Documentation/scst/SysfsRules linux-2.6.33/Documentation/scst/SysfsRules
--- orig/linux-2.6.33/Documentation/scst/SysfsRules
+++ linux-2.6.33/Documentation/scst/SysfsRules
@@ -0,0 +1,795 @@
+		SCST SYSFS interface rules
+		==========================
+
+This file describes SYSFS interface rules, which all SCST target
+drivers, dev handlers and management utilities MUST follow. This allows
+to have a simple, self-documented, target drivers and dev handlers
+independent management interface.
+
+Words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
+"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
+document are to be interpreted as described in RFC 2119.
+
+In this document "key attribute" means a configuration attribute with
+not default value, which must be configured during the target driver's
+initialization. A key attribute MUST have in the last line keyword
+"[key]". If a default value set to a key attribute, it becomes a regular
+none-key attribute. For instance, iSCSI target has attribute DataDigest.
+Default value for this attribute is "None". It value "CRC32C" is set to
+this attribute, it will become a key attribute. If value "None" is again
+set, this attribute will become back to a none-key attribute.
+
+Each user configurable attribute with a not default value MUST be marked
+as key attribute.
+
+I. Rules for target drivers
+===========================
+
+SCST core for each target driver (struct scst_tgt_template) creates a
+root subdirectory in /sys/kernel/scst_tgt/targets with name
+scst_tgt_template.name (called "target_driver_name" further in this
+document). 
+
+For each target (struct scst_tgt) SCST core creates a root subdirectory
+in /sys/kernel/scst_tgt/targets/target_driver_name with name
+scst_tgt.tgt_name (called "target_name" further in this document).
+
+There are 2 type of targets possible: hardware and virtual targets.
+Hardware targets are targets corresponding to real hardware, for
+instance, a Fibre Channel adapter's port. Virtual targets are hardware
+independent targets, which can be dynamically added or removed, for
+instance, an iSCSI target, or NPIV Fibre Channel target.
+
+A target driver supporting virtual targets must support "mgmt" attribute
+and "add_target"/"del_target" commands.
+
+If target driver supports both hardware and virtual targets (for
+instance, an FC adapter supporting NPIV, which has hardware targets for
+its physical ports as well as virtual NPIV targets), it MUST create each
+hardware target with hw_target mark to make SCST core create "hw_target"
+attribute (see below).
+
+Attributes for target drivers
+-----------------------------
+
+A target driver MAY support in its root subdirectory the following
+optional attributes. Target drivers MAY also support there other
+read-only or read-writable attributes.
+
+1. "enabled" - this attribute MUST allow to enable and disable target
+driver as a whole, i.e. if disabled, the target driver MUST NOT accept
+new connections. The goal of this attribute is to allow the target
+driver's initial configuration. For instance, iSCSI target may need to
+have discovery user names and passwords set before it starts serving
+discovery connections.
+
+This attribute MUST have read and write permissions for superuser and be
+read-only for other users.
+
+On read it MUST return 0, if the target driver is disabled, and 1, if it
+is enabled.
+
+On write it MUST accept '0' character as request to disable and '1' as
+request to enable, but MAY also accept other driver specific commands.
+
+During disabling the target driver MAY close already connected sessions
+in all targets, but this is OPTIONAL.
+
+MUST be 0 by default.
+
+2. "trace_level" - this attribute SHOULD allow to change log level of this
+driver. 
+
+This attribute SHOULD have read and write permissions for superuser and be
+read-only for other users.
+
+On read it SHOULD return a help text about available command and log levels.
+
+On write it SHOULD accept commands to change log levels according to the
+help text.
+
+For example:
+
+out_of_mem | minor | pid | line | function | special | mgmt | mgmt_dbg | flow_control | conn
+
+Usage:
+        echo "all|none|default" >trace_level
+        echo "value DEC|0xHEX|0OCT" >trace_level
+        echo "add|del TOKEN" >trace_level
+
+where TOKEN is one of [debug, function, line, pid,
+		       entryexit, buff, mem, sg, out_of_mem,
+		       special, scsi, mgmt, minor,
+		       mgmt_dbg, scsi_serializing,
+		       retry, recv_bot, send_bot, recv_top,
+		       send_top, d_read, d_write, conn, conn_dbg, iov, pdu, net_page]
+
+3. "version" - this read-only for all attribute SHOULD return version of
+the target driver and some info about its enabled compile time facilities.
+
+For example:
+
+2.0.0
+EXTRACHECKS
+DEBUG
+ 
+4. "mgmt" - this attribute MUST allow to add and delete targets, if
+virtual targets are supported by this driver, as well as it MAY allow to
+add and delete the target driver's or its targets' attributes.
+
+This attribute MUST have read and write permissions for superuser and be
+read-only for other users.
+
+On read it MUST return a help string describing available commands and
+parameters.
+
+For example:
+
+Usage: echo "add_target target_name [parameters]" >mgmt
+       echo "del_target target_name" >mgmt
+       echo "add_attribute IncomingUser name password" >mgmt
+       echo "del_attribute IncomingUser name" >mgmt
+       echo "add_attribute OutgoingUser name password" >mgmt
+       echo "del_attribute OutgoingUser name" >mgmt
+       echo "add_target_attribute target_name IncomingUser name password" >mgmt
+       echo "del_target_attribute target_name IncomingUser name" >mgmt
+       echo "add_target_attribute target_name OutgoingUser name password" >mgmt
+       echo "del_target_attribute target_name OutgoingUser name" >mgmt
+
+where parameters are one or more param_name=value pairs separated by ';'                                                                
+
+4.1. "add_target" - if supported, this command MUST add new target with
+name "target_name" and specified optional or required parameters. Each
+parameter MUST be in form "parameter=value". All parameters MUST be
+separated by ';' symbol.
+
+All target drivers supporting creation of virtual targets MUST support
+this command.
+
+All target drivers supporting "add_target" command MUST support all
+read-only targets' key attributes as parameters to "add_target" command
+with the attributes' names as parameters' names and the attributes'
+values as parameters' values. 
+
+For example:
+
+echo "add_target TARGET1 parameter1=1; parameter2=2" >mgmt
+
+will add target with name "TARGET1" and parameters with names
+"parameter1" and "parameter2" with values 1 and 2 correspondingly.
+
+4.2. "del_target" - if supported, this command MUST delete target with
+name "target_name". If "add_target" command is supported "del_target"
+MUST also be supported.
+
+4.3. "add_attribute" - if supported, this command MUST add a target
+driver's attribute with the specified name and one or more values.
+
+All target drivers supporting run time creation of the target driver's
+key attributes MUST support this command.
+
+For example, for iSCSI target:
+
+echo "add_attribute IncomingUser name password" >mgmt
+
+will add for discovery sessions an incoming user (attribute
+/sys/kernel/scst_tgt/targets/iscsi/IncomingUser) with name "name" and
+password "password".
+
+4.4. "del_attribute" - if supported, this command MUST delete  target
+driver's attribute with the specified name and values. The values MUST
+be specified, because in some cases attributes MAY internally be
+distinguished by values. For instance, iSCSI target might have several
+incoming users. If not needed, target driver might ignore the values.
+
+If "add_attribute" command is supported "del_attribute" MUST
+also be supported.
+
+4.5. "add_target_attribute" - if supported, this command MUST add new
+attribute for the specified target with the specified name and one or
+more values.
+
+All target drivers supporting run time creation of targets' key
+attributes MUST support this command.
+
+For example:
+
+echo "add_target_attribute iqn.2006-10.net.vlnb:tgt IncomingUser name password" >mgmt
+
+will add for target with name "iqn.2006-10.net.vlnb:tgt" an incoming
+user (attribute
+/sys/kernel/scst_tgt/targets/iscsi/iqn.2006-10.net.vlnb:tgt/IncomingUser)
+with name "name" and password "password".
+
+4.6. "del_target_attribute" - if supported, this command MUST delete 
+target's attribute with the specified name and values. The values MUST
+be specified, because in some cases attributes MAY internally be
+distinguished by values. For instance, iSCSI target might have several
+incoming users. If not needed, target driver might ignore the values.
+
+If "add_target_attribute" command is supported "del_target_attribute"
+MUST also be supported.
+
+Attributes for targets
+----------------------
+
+Each target MAY support in its root subdirectory the following optional
+attributes. Target drivers MAY also support there other read-only or
+read-writable attributes.
+
+1. "enabled" - this attribute MUST allow to enable and disable the
+corresponding target, i.e. if disabled, the target MUST NOT accept new
+connections. The goal of this attribute is to allow the target's initial
+configuration. For instance, each target needs to have its LUNs setup
+before it starts serving initiators. Another example is iSCSI target,
+which may need to have initialized a number of iSCSI parameters before
+it starts accepting new iSCSI connections.
+
+This attribute MUST have read and write permissions for superuser and be
+read-only for other users.
+
+On read it MUST return 0, if the target is disabled, and 1, if it is
+enabled.
+
+On write it MUST accept '0' character as request to disable and '1' as
+request to enable. Other requests MUST be rejected.
+
+SCST core provides some facilities, which MUST be used to implement this
+attribute.
+
+During disabling the target driver MAY close already connected sessions
+to the target, but this is OPTIONAL.
+
+MUST be 0 by default.
+
+SCST core will automatically create for all targets the following
+attributes:
+
+1. "rel_tgt_id" - allows to read or write SCSI Relative Target Port
+Identifier attribute.
+
+2. "hw_target" - allows to distinguish hardware and virtual targets, if
+the target driver supports both.
+
+To provide OPTIONAL force close session functionality target drivers
+MUST implement it using "force_close" write only session's attribute,
+which on write to it MUST close the corresponding session.
+
+See SCST core's README for more info about those attributes.
+
+II. Rules for dev handlers
+==========================
+
+There are 2 types of dev handlers: parent dev handlers and children dev
+handlers. The children dev handlers depend from the parent dev handlers.
+
+SCST core for each parent dev handler (struct scst_dev_type with
+parent member with value NULL) creates a root subdirectory in
+/sys/kernel/scst_tgt/handlers with name scst_dev_type.name (called
+"dev_handler_name" further in this document). 
+
+Parent dev handlers can have one or more subdirectories for children dev
+handlers with names scst_dev_type.name of them.
+
+Only one level of the dev handlers' parent/children hierarchy is
+allowed. Parent dev handlers, which support children dev handlers, MUST
+NOT handle devices and MUST be only placeholders for the children dev
+handlers.
+
+Further in this document children dev handlers or parent dev handlers,
+which don't support children, will be called "end level dev handlers".
+
+Each end level dev handler MUST be either for pass-through, or for
+virtual devices.
+
+End level dev handlers can be recognized by existence of the "mgmt"
+attribute.
+
+For each device (struct scst_device) SCST core creates a root
+subdirectory in /sys/kernel/scst_tgt/devices/device_name with name
+scst_device.virt_name (called "device_name" further in this document).
+
+Attributes for dev handlers
+---------------------------
+
+Each pass-through dev handler MUST have in its root subdirectory
+"pass-through" and "mgmt" attributes and the "mgmt" attribute MUST
+support "assign" and "unassign" commands as described below.
+
+Each virtual devices dev handler MUST have it in its root subdirectory
+"mgmt" attribute, which MUST support "add_device" and "del_device"
+attributes as described below.
+
+Parent dev handlers and end level dev handlers without parents MAY
+support in its root subdirectory the following optional attributes. They
+MAY also support there other read-only or read-writable attributes.
+
+1. "trace_level" - this attribute SHOULD allow to change log level of this
+driver. 
+
+This attribute SHOULD have read and write permissions for superuser and be
+read-only for other users.
+
+On read it SHOULD return a help text about available command and log levels.
+
+On write it SHOULD accept commands to change log levels according to the
+help text.
+
+For example:
+
+out_of_mem | minor | pid | line | function | special | mgmt | mgmt_dbg
+
+Usage:
+	echo "all|none|default" >trace_level
+	echo "value DEC|0xHEX|0OCT" >trace_level
+	echo "add|del TOKEN" >trace_level
+
+where TOKEN is one of [debug, function, line, pid,
+		       entryexit, buff, mem, sg, out_of_mem,
+		       special, scsi, mgmt, minor,
+		       mgmt_dbg, scsi_serializing,
+		       retry, recv_bot, send_bot, recv_top,
+		       send_top]
+
+2. "version" - this read-only for all attribute SHOULD return version of
+the dev handler and some info about its enabled compile time facilities.
+
+For example:
+
+2.0.0
+EXTRACHECKS
+DEBUG
+
+End level dev handlers in their root subdirectories MUST support "mgmt"
+attribute and MAY support other read-only or read-writable attributes.
+This attribute MUST have read and write permissions for superuser and be
+read-only for other users.
+
+Attribute "mgmt" for virtual devices dev handlers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For virtual devices dev handlers "mgmt" attribute MUST allow to add and
+delete devices as well as it MAY allow to add and delete the dev
+handler's or its devices' attributes.
+
+On read it MUST return a help string describing available commands and
+parameters.
+
+For example:
+
+Usage: echo "add_device device_name [parameters]" >mgmt
+       echo "del_device device_name" >mgmt
+       echo "add_attribute AttributeX ValueX" >mgmt
+       echo "del_attribute AttributeX ValueX" >mgmt
+       echo "add_attribute AttributeY ValueY1 ValueY2" >mgmt
+       echo "del_attribute AttributeY" >mgmt
+       echo "add_device_attribute device_name AttributeDX ValueDX" >mgmt
+       echo "del_device_attribute device_name AttributeDX ValueDX" >mgmt
+       echo "add_device_attribute device_name AttributeDY ValueY1 ValueY2" >mgmt
+       echo "del_device_attribute device_name AttributeDY" >mgmt
+
+where parameters are one or more param_name=value pairs separated by ';'
+
+The following parameters available: filename, blocksize, write_through, nv_cache, o_direct, read_only, removable
+
+1. "add_device" - this command MUST add new device with name
+"device_name" and specified optional or required parameters. Each
+parameter MUST be in form "parameter=value". All parameters MUST be
+separated by ';' symbol.
+
+All dev handlers supporting "add_device" command MUST support all
+read-only devices' key attributes as parameters to "add_device" command
+with the attributes' names as parameters' names and the attributes'
+values as parameters' values. 
+
+For example:
+
+echo "add_device device1 parameter1=1; parameter2=2" >mgmt
+
+will add device with name "device1" and parameters with names
+"parameter1" and "parameter2" with values 1 and 2 correspondingly.
+
+2. "del_device" - this command MUST delete device with name
+"device_name".
+
+3. "add_attribute" - if supported, this command MUST add a device
+driver's attribute with the specified name and one or more values.
+
+All dev handlers supporting run time creation of the dev handler's
+key attributes MUST support this command.
+
+For example:
+
+echo "add_attribute AttributeX ValueX" >mgmt
+
+will add attribute
+/sys/kernel/scst_tgt/handlers/dev_handler_name/AttributeX with value ValueX.
+
+4. "del_attribute" - if supported, this command MUST delete device
+driver's attribute with the specified name and values. The values MUST
+be specified, because in some cases attributes MAY internally be
+distinguished by values. If not needed, dev handler might ignore the
+values.
+
+If "add_attribute" command is supported "del_attribute" MUST also be
+supported.
+
+5. "add_device_attribute" - if supported, this command MUST add new
+attribute for the specified device with the specified name and one or
+more values.
+
+All dev handlers supporting run time creation of devices' key attributes
+MUST support this command.
+
+For example:
+
+echo "add_device_attribute device1 AttributeDX ValueDX" >mgmt
+
+will add for device with name "device1" attribute
+/sys/kernel/scst_tgt/devices/device_name/AttributeDX) with value
+ValueDX.
+
+6. "del_device_attribute" - if supported, this command MUST delete 
+device's attribute with the specified name and values. The values MUST
+be specified, because in some cases attributes MAY internally be
+distinguished by values. If not needed, dev handler might ignore the
+values.
+
+If "add_device_attribute" command is supported "del_device_attribute"
+MUST also be supported.
+
+Attribute "mgmt" for pass-through devices dev handlers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For pass-through devices dev handlers "mgmt" attribute MUST allow to
+assign and unassign this dev handler to existing SCSI devices.
+
+On read it MUST return a help string describing available commands and
+parameters.
+
+For example:
+
+Usage: echo "assign H:C:I:L" >mgmt
+       echo "unassign H:C:I:L" >mgmt
+
+1. "assign" - this command MUST assign SCSI device with
+host:channel:id:lun numbers to this dev handler.
+
+All pass-through dev handlers MUST support this command.
+
+For example:
+
+echo "assign 1:0:0:0" >mgmt
+
+will assign SCSI device 1:0:0:0 to this dev handler.
+
+2. "unassign" - this command MUST unassign SCSI device with
+host:channel:id:lun numbers from this dev handler.
+
+SCST core will automatically create for all dev handlers the following
+attributes:
+
+1. "pass_through" - if the dev handler is a handler for pass-through
+devices, SCST core create this attribute. This attribute will have value
+1.
+
+2. "type" - SCSI type of device this dev handler can handle.
+
+See SCST core's README for more info about those attributes.
+
+Attributes for devices
+----------------------
+
+Each device MAY support in its root subdirectory any read-only or
+read-writable attributes.
+
+SCST core will automatically create for all devices the following
+attributes:
+
+1. "type" - SCSI type of this device
+
+See SCST core's README for more info about those attributes.
+
+III. Rules for management utilities
+===================================
+
+Rules summary
+-------------
+
+A management utility (scstadmin) SHOULD NOT keep any knowledge specific
+to any device, dev handler, target or target driver. It SHOULD only know
+the common SCST SYSFS rules, which all dev handlers and target drivers
+MUST follow. Namely:
+
+Common rules:
+~~~~~~~~~~~~~
+
+1. All key attributes MUST be marked by mark "[key]" in the last line of
+the attribute.
+
+2. All not key attributes don't matter and SHOULD be ignored.
+
+For target drivers and targets:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+1. If target driver supports adding new targets, it MUST have "mgmt"
+attribute, which MUST support "add_target" and "del_target" commands as
+specified above.
+
+2. If target driver supports run time adding new key attributes, it MUST
+have "mgmt" attribute, which MUST support "add_attribute" and
+"del_attribute" commands as specified above.
+
+3. If target driver supports both hardware and virtual targets, all its
+hardware targets MUST have "hw_target" attribute with value 1.
+
+4. If target has read-only key attributes, the add_target command MUST
+support them as parameters.
+
+5. If target supports run time adding new key attributes, the target
+driver MUST have "mgmt" attribute, which MUST support
+"add_target_attribute" and "del_target_attribute" commands as specified
+above.
+
+6. Both target drivers and targets MAY support "enable" attribute. If
+supported, after configuring the corresponding target driver or target
+"1" MUST be written to this attribute in the following order: at first,
+for all targets of the target driver, then for the target driver.
+
+For devices and dev handlers:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+1. Each dev handler in its root subdirectory MUST have "mgmt" attribute.
+
+2. All pass-through dev handlers MUST have "pass_through" attribute.
+
+3. Each virtual devices dev handler MUST support "add_device" and
+"del_device" commands to the "mgmt" attribute as specified above.
+
+4. Each pass-through dev handler MUST support "assign" and "unassign"
+commands to the "mgmt" attribute as specified above.
+
+5. If dev handler driver supports run time adding new key attributes, it
+MUST support "add_attribute" and "del_attribute" commands to the "mgmt"
+attribute as specified above.
+
+6. All device handlers have links in the root subdirectory pointing to
+their devices.
+
+7. If device has read-only key attributes, the "add_device" command MUST
+support them as parameters.
+
+8. If device supports run time adding new key attributes, its dev
+handler MUST support "add_device_attribute" and "del_device_attribute"
+commands to the "mgmt" attribute as specified above.
+
+9. Each device has "handler" link to its dev handler's root
+subdirectory.
+
+Algorithm to convert current SCST configuration to config file
+--------------------------------------------------------------
+
+A management utility SHOULD use the following algorithm when converting
+current SCST configuration to a config file:
+
+1. Scan all attributes in /sys/kernel/scst_tgt (not requirsive) and store
+all found key attributes.
+
+2. Scan all subdirectories of /sys/kernel/scst_tgt/handlers. Each
+subdirectory with "mgmt" attribute is a root subdirectory of a dev
+handler with name the name of the subdirectory. For each found dev
+handler do the following:
+
+2.1. Store the dev handler's name. Store also its path to the root
+subdirectory, if it isn't default (/sys/kernel/scst_tgt/handlers/handler_name).
+
+2.2. Store all dev handler's key attributes.
+
+2.3. Go through all links in the root subdirectory pointing to
+/sys/kernel/scst_tgt/devices and for each device:
+
+2.3.1. For virtual devices dev handlers:
+
+2.3.1.1. Store the name of the device.
+
+2.3.1.2. Store all key attributes. Mark all read only key attributes
+during storing, they will be parameters for the device's creation.
+
+2.3.2. For pass-through devices dev handlers:
+
+2.3.2.1. Store the H:C:I:L name of the device. Optionally, instead of
+the name unique T10 vendor device ID found using command:
+
+sg_inq -p 0x83 /dev/sdX
+
+can be stored. It will allow to reliably find out this device if on the
+next reboot it will have another host:channel:id:lin numbers. The sdX
+device can be found as the last letters after ':' in
+/sys/kernel/scst_tgt/devices/H:C:I:L/scsi_device/device/block:sdX.
+
+3. Go through all subdirectories in /sys/kernel/scst_tgt/targets. For
+each target driver:
+
+3.1. Store the name of the target driver.
+
+3.2. Store all its key attributes.
+
+3.3. Go through all target's subdirectories. For each target:
+
+3.3.1. Store the name of the target.
+
+3.3.2. Mark if the target is hardware or virtual target. The target is a
+hardware target if it has "hw_target" attribute or its target driver
+doesn't have "mgmt" attribute.
+
+3.3.3. Store all key attributes. Mark all read only key attributes
+during storing, they will be parameters for the target's creation.
+
+3.3.4. Scan all "luns" subdirectory and store:
+
+ - LUN.
+
+ - LU's device name.
+
+ - Key attributes.
+
+3.3.5. Scan all "ini_groups" subdirectories. For each group store the following:
+
+ - The group's name.
+
+ - The group's LUNs (the same info as for 3.3.4).
+
+ - The group's initiators.
+
+3.3.6. Store value of "enabled" attribute, if it exists.
+
+3.4. Store value of "enabled" attribute, if it exists.
+
+Algorithm to initialize SCST from config file
+---------------------------------------------
+
+A management utility SHOULD use the following algorithm when doing
+initial SCST configuration from a config file. All necessary kernel
+modules and user space programs supposed to be already loaded, hence all
+dev handlers' entries in /sys/kernel/scst_tgt/handlers as well as all
+entries for hardware targets already created.
+
+1. Set stored values for all stored global (/sys/kernel/scst_tgt)
+attributes.
+
+2. For each dev driver:
+
+2.1. Set stored values for all already existing stored attributes.
+
+2.2. Create not existing stored attributes using "add_attribute" command.
+
+2.3. For virtual devices dev handlers for each stored device:
+
+2.3.1. Create the device using "add_device" command using marked read
+only attributes as parameters.
+
+2.3.2. Set stored values for all already existing stored attributes.
+
+2.3.3. Create not existing stored attributes using
+"add_device_attribute" command.
+
+2.4. For pass-through dev handlers for each stores device:
+
+2.4.1. Assign the corresponding pass-through device to this dev handler
+using "assign" command, if it isn't already auto assigned to it.
+
+3. For each target driver:
+
+3.1. Set stored values for all already existing stored attributes.
+
+3.2. Create not existing stored attributes using "add_attribute" command.
+
+3.3. For each target:
+
+3.3.1. For virtual targets:
+
+3.3.1.1. Create the target using "add_target" command using marked read
+only attributes as parameters.
+
+3.3.1.2. Set stored values for all already existing stored attributes.
+
+3.3.1.3. Create not existing stored attributes using
+"add_target_attribute" command.
+
+3.3.2. For hardware targets for each target:
+
+3.3.2.1. Set stored values for all already existing stored attributes.
+
+3.3.2.2. Create not existing stored attributes using
+"add_target_attribute" command.
+
+3.3.3. Setup LUNs
+
+3.3.4. Setup ini_groups, their LUNs and initiators' names.
+
+3.3.5. If this target supports enabling, enable it.
+
+3.4. If this target driver supports enabling, enable it.
+
+Algorithm to apply changes in config file to currently running SCST
+-------------------------------------------------------------------
+
+A management utility SHOULD use the following algorithm when applying
+changes in config file to currently running SCST.
+
+Not all changes can be applied on enabled targets or enabled target
+drivers. From other side, for some target drivers enabling/disabling is
+a very long and disruptive operation, which should be performed as rare
+as possible. Thus, the management utility SHOULD support additional
+option, which, if set, will make it to disable all affected targets
+before doing any change with them.
+
+1. Scan all attributes in /sys/kernel/scst_tgt (not requirsive) and
+compare stored and actual key attributes. Apply all changes.
+
+2. Scan all subdirectories of /sys/kernel/scst_tgt/handlers. Each
+subdirectory with "mgmt" attribute is a root subdirectory of a dev
+handler with name the name of the subdirectory. For each found dev
+handler do the following:
+
+2.1. Compare stored and actual key attributes. Apply all changes. Create
+new attributes using "add_attribute" commands and delete not needed any
+more attributes using "del_attribute" command.
+
+2.2. Compare existing devices (links in the root subdirectory pointing
+to /sys/kernel/scst_tgt/devices) and stored devices in the config file.
+Delete all not needed devices and create new devices.
+
+2.3. For all existing devices:
+
+2.3.1. Compare stored and actual key attributes. Apply all changes.
+Create new attributes using "add_device_attribute" commands and delete
+not needed any more attributes using "del_device_attribute" command.
+
+2.3.2. If any read only key attribute for virtual device should be
+changed, delete the devices and recreate it.
+
+2.3.3. For pass-through devices dev handlers reassign handlers if
+necessary.
+
+3. Go through all subdirectories in /sys/kernel/scst_tgt/targets. For
+each target driver:
+
+3.1. If this target driver should be disabled, disable it.
+
+3.2. Compare stored and actual key attributes. Apply all changes. Create
+new attributes using "add_attribute" commands and delete not needed any
+more attributes using "del_attribute" command.
+
+3.3. Go through all target's subdirectories. Compare existing and stored
+targets. Delete all not needed targets and create new targets.
+
+3.4. For all existing targets:
+
+3.4.1. If this target should be disabled, disable it.
+
+3.4.2. Compare stored and actual key attributes. Apply all changes.
+Create new attributes using "add_target_attribute" commands and delete
+not needed any more attributes using "del_target_attribute" command.
+
+3.4.3. If any read only key attribute for virtual target should be
+changed, delete the target and recreate it.
+
+3.4.4. Scan all "luns" subdirectory and apply necessary changes, using
+"replace" commands to replace one LUN by another, if needed.
+
+3.4.5. Scan all "ini_groups" subdirectories and apply necessary changes,
+using "replace" commands to replace one LUN by another and "move"
+command to move initiator from one group to another, if needed. It MUST
+be done in the following order:
+
+ - Necessary initiators deleted, if they aren't going to be moved
+
+ - LUNs updated
+ 
+ - Necessary initiators added or moved
+
+3.4.6. If this target should be enabled, enable it.
+
+3.5. If this target driver should be enabled, enable it.
+