From: Mark Lord <mlord@pobox.com>
To: Andy Walls <awalls@md.metrocast.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
linux-media@vger.kernel.org, ivtv-devel@ivtvdriver.org,
Darren Blaber <dmbtech@gmail.com>
Subject: Re: cx18: "missing audio" for analog recordings
Date: Wed, 14 Apr 2010 00:34:08 -0400 [thread overview]
Message-ID: <4BC545C0.4030506@pobox.com> (raw)
In-Reply-To: <4BC54569.7020301@pobox.com>
On 14/04/10 12:32 AM, Mark Lord wrote:
..
> Thanks. I'll have a go at that some night.
>
> Meanwhile, tonight, audio failed.
..
Oh, I forgot to include this:
Apr 13 22:00:05 duke kernel: cx18-0: ================= START STATUS CARD #0 =================
Apr 13 22:00:05 duke kernel: cx18-0: Version: 1.4.0 Card: Hauppauge HVR-1600
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: Hauppauge model 74551, rev C1A3, serial# 1752579
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: MAC address is 00:0d:fe:1a:be:03
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: audio processor is CX23418 (idx 38)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: decoder processor is CX23418 (idx 31)
Apr 13 22:00:05 duke kernel: tveeprom 1-0050: has radio
Apr 13 22:00:05 duke kernel: cx18-0 843: Video signal: present
Apr 13 22:00:05 duke kernel: cx18-0 843: Detected format: NTSC-M
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified standard: NTSC-M
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified video input: Composite 7
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified audioclock freq: 48000 Hz
Apr 13 22:00:05 duke kernel: cx18-0 843: Detected audio mode: forced mode
Apr 13 22:00:05 duke kernel: cx18-0 843: Detected audio standard: forced audio standard
Apr 13 22:00:05 duke kernel: cx18-0 843: Audio muted: no
Apr 13 22:00:05 duke kernel: cx18-0 843: Audio microcontroller: running
Apr 13 22:00:05 duke kernel: cx18-0 843: Configured audio standard: BTSC
Apr 13 22:00:05 duke kernel: cx18-0 843: Configured audio mode: MONO2 (LANGUAGE B)
Apr 13 22:00:05 duke kernel: cx18-0 843: Specified audio input: Tuner (In8)
Apr 13 22:00:05 duke kernel: cx18-0 843: Preferred audio mode: stereo
Apr 13 22:00:05 duke kernel: cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value 0x00003001
Apr 13 22:00:05 duke kernel: tda9887 2-0043: Data bytes: b=0x14 c=0x30 e=0x44
Apr 13 22:00:05 duke kernel: tuner 2-0061: Tuner mode: analog TV
Apr 13 22:00:05 duke kernel: tuner 2-0061: Frequency: 531.25 MHz
Apr 13 22:00:05 duke kernel: tuner 2-0061: Standard: 0x0000b000
Apr 13 22:00:05 duke kernel: cs5345 1-004c: Input: 1
Apr 13 22:00:05 duke kernel: cs5345 1-004c: Volume: 0 dB
Apr 13 22:00:05 duke kernel: cx18-0: Video Input: Tuner 1
Apr 13 22:00:05 duke kernel: cx18-0: Audio Input: Tuner 1
Apr 13 22:00:05 duke kernel: cx18-0: GPIO: direction 0x00003001, value 0x00003001
Apr 13 22:00:05 duke kernel: cx18-0: Tuner: TV
Apr 13 22:00:05 duke kernel: cx18-0: Stream: MPEG-2 Program Stream
Apr 13 22:00:05 duke kernel: cx18-0: VBI Format: Private packet, IVTV format
Apr 13 22:00:05 duke kernel: cx18-0: Video: 720x480, 30 fps
Apr 13 22:00:05 duke kernel: cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 12000000, Peak 14500000
Apr 13 22:00:05 duke kernel: cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
Apr 13 22:00:05 duke kernel: cx18-0: Audio: 48 kHz, MPEG-1/2 Layer II, 224 kbps, Stereo, No Emphasis, No CRC
Apr 13 22:00:05 duke kernel: cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0
Apr 13 22:00:05 duke kernel: cx18-0: Temporal Filter: Manual, 8
Apr 13 22:00:05 duke kernel: cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
Apr 13 22:00:05 duke kernel: cx18-0: Status flags: 0x00200001
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder MPEG: status 0x0118, 0% of 2048 KiB (64 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder YUV: status 0x0000, 0% of 2025 KiB (20 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder VBI: status 0x0038, 5% of 1015 KiB (20 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB (256 buffers) in use
Apr 13 22:00:05 duke kernel: cx18-0: Read MPEG/VBI: 190420992/476784 bytes
Apr 13 22:00:05 duke kernel: cx18-0: ================== END STATUS CARD #0 ==================
--
Mark Lord
Real-Time Remedies Inc.
mlord@pobox.com
next prev parent reply other threads:[~2010-04-14 4:34 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-01 16:07 cx18: Unable to find blank work order form to schedule incoming mailbox Mark Lord
2010-03-02 1:34 ` Andy Walls
2010-03-02 5:57 ` Mark Lord
2010-03-02 12:40 ` Andy Walls
2010-03-02 15:00 ` Mark Lord
2010-03-03 1:05 ` Andy Walls
2010-03-15 2:48 ` cx18: "missing audio" for analog recordings Mark Lord
2010-03-15 11:51 ` Andy Walls
2010-03-16 4:49 ` Mark Lord
2010-03-16 11:11 ` Andy Walls
2010-04-10 22:28 ` Mark Lord
2010-04-10 22:54 ` Andy Walls
2010-04-11 0:58 ` Andy Walls
2010-04-11 3:21 ` Mark Lord
2010-04-11 4:56 ` Andy Walls
2010-04-11 5:03 ` [ivtv-devel] " Andy Walls
2010-04-11 11:47 ` Andy Walls
2010-04-11 13:24 ` Mark Lord
2010-04-11 19:01 ` Andy Walls
2010-04-11 20:52 ` Mark Lord
2010-04-12 20:08 ` Mark Lord
2010-04-12 21:17 ` Andy Walls
2010-04-13 2:22 ` Mark Lord
2010-04-13 2:30 ` Mark Lord
2010-04-13 2:34 ` Mark Lord
2010-04-13 10:35 ` Andy Walls
2010-04-13 12:42 ` Mark Lord
2010-04-14 1:45 ` Andy Walls
2010-04-14 4:32 ` Mark Lord
2010-04-14 4:34 ` Mark Lord [this message]
2010-04-14 22:26 ` Mark Lord
2010-04-15 4:46 ` Andy Walls
2010-04-15 5:16 ` Mark Lord
2010-04-15 14:15 ` Mark Lord
2010-04-17 4:43 ` Andy Walls
2010-04-17 12:09 ` Mark Lord
2010-04-17 13:01 ` Mark Lord
2010-04-17 17:18 ` Andy Walls
2010-04-17 17:03 ` Andy Walls
2010-04-16 12:59 ` Andy Walls
2010-04-17 12:18 ` Mark Lord
2010-04-17 17:37 ` Andy Walls
2010-04-16 13:15 ` Andy Walls
2010-04-16 13:29 ` Andy Walls
2010-04-11 19:49 ` Darren Blaber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BC545C0.4030506@pobox.com \
--to=mlord@pobox.com \
--cc=awalls@md.metrocast.net \
--cc=dmbtech@gmail.com \
--cc=hverkuil@xs4all.nl \
--cc=ivtv-devel@ivtvdriver.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.