From: "Paweł Staszewski" <pstaszewski@itcare.pl>
To: Linux Network Development list <netdev@vger.kernel.org>
Subject: ixgbe - problem with packet/bytes count on all queues
Date: Sun, 18 Apr 2010 11:14:02 +0200 [thread overview]
Message-ID: <4BCACD5A.6070809@itcare.pl> (raw)
Hello
I want to ask is this a normal behavior of ixgb driver and 82598EB nic.
look for tx_queue_7 stats:
ethtool -S eth2
NIC statistics:
rx_packets: 35103252
tx_packets: 1770371731
rx_bytes: 3602052416
tx_bytes: 1369778276
rx_pkts_nic: 138121006018
tx_pkts_nic: 122033163226
rx_bytes_nic: 101484528847981
tx_bytes_nic: 92258799092069
lsc_int: 1
tx_busy: 0
non_eop_descs: 0
rx_errors: 0
tx_errors: 0
rx_dropped: 0
tx_dropped: 0
multicast: 490226
broadcast: 124104912
rx_no_buffer_count: 0
collisions: 0
rx_over_errors: 0
rx_crc_errors: 0
rx_frame_errors: 0
hw_rsc_aggregated: 0
hw_rsc_flushed: 0
fdir_match: 0
fdir_miss: 0
rx_fifo_errors: 0
rx_missed_errors: 0
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
tx_timeout_count: 0
tx_restart_queue: 111130
rx_long_length_errors: 38599
rx_short_length_errors: 0
tx_flow_control_xon: 0
rx_flow_control_xon: 0
tx_flow_control_xoff: 0
rx_flow_control_xoff: 0
rx_csum_offload_errors: 1554191
alloc_rx_page_failed: 0
alloc_rx_buff_failed: 0
rx_no_dma_resources: 0
tx_queue_0_packets: 108685351623
tx_queue_0_bytes: 79701402025544
tx_queue_1_packets: 3988024698
tx_queue_1_bytes: 3353530467775
tx_queue_2_packets: 1893305707
tx_queue_2_bytes: 1705357186034
tx_queue_3_packets: 1787852613
tx_queue_3_bytes: 1518632482370
tx_queue_4_packets: 1843108684
tx_queue_4_bytes: 1641474602504
tx_queue_5_packets: 1882637467
tx_queue_5_bytes: 1629905766993
tx_queue_6_packets: 1952759802
tx_queue_6_bytes: 1680666591771
tx_queue_7_packets: 0
tx_queue_7_bytes: 0
rx_queue_0_packets: 17361735592
rx_queue_0_bytes: 12585728518077
rx_queue_1_packets: 17194262916
rx_queue_1_bytes: 12518731583464
rx_queue_2_packets: 17342312348
rx_queue_2_bytes: 12734959063176
rx_queue_3_packets: 17367632051
rx_queue_3_bytes: 12656219984521
rx_queue_4_packets: 17150307164
rx_queue_4_bytes: 12408526754019
rx_queue_5_packets: 17206721842
rx_queue_5_bytes: 12470666039893
rx_queue_6_packets: 17202210572
rx_queue_6_bytes: 12431429298950
rx_queue_7_packets: 17295822822
rx_queue_7_bytes: 12573299488239
and here look at multiq queue number 8:
tc -s -d class show dev eth2
class multiq 1:1 parent 1:
Sent 6905560675905 bytes 510743840 pkt (dropped 0, overlimits 0
requeues 0)
backlog 0b 0p requeues 0
class multiq 1:2 parent 1:
Sent 280699743990 bytes 330210442 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class multiq 1:3 parent 1:
Sent 128528666971 bytes 142053106 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class multiq 1:4 parent 1:
Sent 123086710694 bytes 140454119 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class multiq 1:5 parent 1:
Sent 121027779083 bytes 146164066 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class multiq 1:6 parent 1:
Sent 116245520195 bytes 141597610 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class multiq 1:7 parent 1:
Sent 133310553887 bytes 151141714 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class multiq 1:8 parent 1:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Is that normal that driver don't use queue number 8 ?
next reply other threads:[~2010-04-18 9:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-18 9:14 Paweł Staszewski [this message]
2010-05-11 18:00 ` ixgbe - problem with packet/bytes count on all queues Brandeburg, Jesse
2010-05-11 19:40 ` Paweł Staszewski
2010-05-13 19:01 ` Paweł Staszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BCACD5A.6070809@itcare.pl \
--to=pstaszewski@itcare.pl \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.