From: Taku Izumi <izumi.taku@jp.fujitsu.com>
To: Bruce Allan <bruce.w.allan@intel.com>,
"David S. Miller" <davem@davemloft.net>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
John Ronciak <john.ronciak@intel.com>,
"Kirsher, Jeffre
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>, chavey@google.com
Subject: [PATCH v3 3/3] ixgbe: add registers etc. printout code just before resetting adapters
Date: Mon, 19 Apr 2010 20:28:08 +0900 [thread overview]
Message-ID: <4BCC3E48.3000005@jp.fujitsu.com> (raw)
In-Reply-To: <4BCC3C9B.3000901@jp.fujitsu.com>
This patch adds registers (,tx/rx rings' status and so on) printout
code just before resetting adapters. This will be helpful for detecting
the root cause of adapters reset.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
---
drivers/net/ixgbe/ixgbe_main.c | 341 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 341 insertions(+)
Index: net-next-2.6.34/drivers/net/ixgbe/ixgbe_main.c
===================================================================
--- net-next-2.6.34.orig/drivers/net/ixgbe/ixgbe_main.c
+++ net-next-2.6.34/drivers/net/ixgbe/ixgbe_main.c
@@ -175,6 +175,345 @@ static inline void ixgbe_disable_sriov(s
adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
}
+struct ixgbe_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = {
+
+ /* General Registers */
+ {IXGBE_CTRL, "CTRL"},
+ {IXGBE_STATUS, "STATUS"},
+ {IXGBE_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {IXGBE_EICR, "EICR"},
+
+ /* RX Registers */
+ {IXGBE_SRRCTL(0), "SRRCTL"},
+ {IXGBE_DCA_RXCTRL(0), "DRXCTL"},
+ {IXGBE_RDLEN(0), "RDLEN"},
+ {IXGBE_RDH(0), "RDH"},
+ {IXGBE_RDT(0), "RDT"},
+ {IXGBE_RXDCTL(0), "RXDCTL"},
+ {IXGBE_RDBAL(0), "RDBAL"},
+ {IXGBE_RDBAH(0), "RDBAH"},
+
+ /* TX Registers */
+ {IXGBE_TDBAL(0), "TDBAL"},
+ {IXGBE_TDBAH(0), "TDBAH"},
+ {IXGBE_TDLEN(0), "TDLEN"},
+ {IXGBE_TDH(0), "TDH"},
+ {IXGBE_TDT(0), "TDT"},
+ {IXGBE_TXDCTL(0), "TXDCTL"},
+
+ /* List Terminator */
+ {}
+};
+
+
+/*
+ * ixgbe_regdump - register printout routine
+ */
+static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo)
+{
+ int i = 0, j = 0;
+ char rname[16];
+ u32 regs[64];
+
+ switch (reginfo->ofs) {
+ case IXGBE_SRRCTL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
+ break;
+ case IXGBE_DCA_RXCTRL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ break;
+ case IXGBE_RDLEN(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
+ break;
+ case IXGBE_RDH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
+ break;
+ case IXGBE_RDT(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
+ break;
+ case IXGBE_RXDCTL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ break;
+ case IXGBE_RDBAL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
+ break;
+ case IXGBE_RDBAH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
+ break;
+ case IXGBE_TDBAL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
+ break;
+ case IXGBE_TDBAH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
+ break;
+ case IXGBE_TDLEN(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
+ break;
+ case IXGBE_TDH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
+ break;
+ case IXGBE_TDT(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
+ break;
+ case IXGBE_TXDCTL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+ break;
+ default:
+ printk(KERN_INFO "%-15s %08x\n", reginfo->name,
+ IXGBE_READ_REG(hw, reginfo->ofs));
+ return;
+ }
+
+ for (i = 0; i < 8; i++) {
+ snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7);
+ printk(KERN_ERR "%-15s ", rname);
+ for (j = 0; j < 8; j++)
+ printk(KERN_CONT "%08x ", regs[i*8+j]);
+ printk(KERN_CONT "\n");
+ }
+
+}
+
+/*
+ * ixgbe_dump - Print registers, tx-rings and rx-rings
+ */
+static void ixgbe_dump(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_reg_info *reginfo;
+ int n = 0;
+ struct ixgbe_ring *tx_ring;
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ union ixgbe_adv_tx_desc *tx_desc;
+ struct my_u0 { u64 a; u64 b; } *u0;
+ struct ixgbe_ring *rx_ring;
+ union ixgbe_adv_rx_desc *rx_desc;
+ struct ixgbe_rx_buffer *rx_buffer_info;
+ u32 staterr;
+ int i = 0;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ printk(KERN_INFO "Device Name state "
+ "trans_start last_rx\n");
+ printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
+ netdev->name,
+ netdev->state,
+ netdev->trans_start,
+ netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ printk(KERN_INFO " Register Name Value\n");
+ for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ ixgbe_regdump(hw, reginfo);
+ }
+
+ /* Print TX Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ] "
+ "leng ntw timestamp\n");
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ tx_buffer_info =
+ &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+ printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)tx_buffer_info->dma,
+ tx_buffer_info->length,
+ tx_buffer_info->next_to_watch,
+ (u64)tx_buffer_info->time_stamp);
+ }
+
+ /* Print TX Rings */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+ /* Transmit Descriptor Formats
+ *
+ * Advanced Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +--------------------------------------------------------------+
+ * 8 | PAYLEN | PORTS | IDX | STA | DCMD |DTYP | RSV | DTALEN |
+ * +--------------------------------------------------------------+
+ * 63 46 45 40 39 36 35 32 31 24 23 20 19 0
+ */
+
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "T [desc] [address 63:0 ] "
+ "[PlPOIdStDDt Ln] [bi->dma ] "
+ "leng ntw timestamp bi->skb\n");
+
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
+ " %04X %3X %016llX %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)tx_buffer_info->dma,
+ tx_buffer_info->length,
+ tx_buffer_info->next_to_watch,
+ (u64)tx_buffer_info->time_stamp,
+ tx_buffer_info->skb);
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ printk(KERN_CONT " NTC/U\n");
+ else if (i == tx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == tx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+
+ if (netif_msg_pktdata(adapter) &&
+ tx_buffer_info->dma != 0)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(tx_buffer_info->dma),
+ tx_buffer_info->length, true);
+ }
+ }
+
+ /* Print RX Rings Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ printk(KERN_INFO "Queue [NTU] [NTC]\n");
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ printk(KERN_INFO "%5d %5X %5X\n", n,
+ rx_ring->next_to_use, rx_ring->next_to_clean);
+ }
+
+ /* Print RX Rings */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+ /* Advanced Receive Descriptor (Read) Format
+ * 63 1 0
+ * +-----------------------------------------------------+
+ * 0 | Packet Buffer Address [63:1] |A0/NSE|
+ * +----------------------------------------------+------+
+ * 8 | Header Buffer Address [63:1] | DD |
+ * +-----------------------------------------------------+
+ *
+ *
+ * Advanced Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 30 21 20 16 15 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
+ * | Checksum Ident | | | | Type | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "R [desc] [ PktBuf A0] "
+ "[ HeadBuf DD] [bi->dma ] [bi->skb] "
+ "<-- Adv Rx Read format\n");
+ printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
+ "[vl er S cks ln] ---------------- [bi->skb] "
+ "<-- Adv Rx Write-Back format\n");
+
+ for (i = 0; i < rx_ring->count; i++) {
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+ rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
+ u0 = (struct my_u0 *)rx_desc;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ if (staterr & IXGBE_RXD_STAT_DD) {
+ /* Descriptor Done */
+ printk(KERN_INFO "RWB[0x%03X] %016llX "
+ "%016llX ---------------- %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ rx_buffer_info->skb);
+ } else {
+ printk(KERN_INFO "R [0x%03X] %016llX "
+ "%016llX %016llX %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)rx_buffer_info->dma,
+ rx_buffer_info->skb);
+
+ if (netif_msg_pktdata(adapter)) {
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(rx_buffer_info->dma),
+ rx_ring->rx_buf_len, true);
+
+ if (rx_ring->rx_buf_len
+ < IXGBE_RXBUFFER_2048)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(
+ rx_buffer_info->page_dma +
+ rx_buffer_info->page_offset
+ ),
+ PAGE_SIZE/2, true);
+ }
+ }
+
+ if (i == rx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == rx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+
+ }
+ }
+
+exit:
+ return;
+}
+
static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
{
u32 ctrl_ext;
@@ -3380,6 +3719,8 @@ static void ixgbe_reset_task(struct work
adapter->tx_timeout_count++;
+ ixgbe_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
ixgbe_reinit_locked(adapter);
}
next prev parent reply other threads:[~2010-04-19 11:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-19 11:20 [PATCH v3 0/3] e1000e,igb,ixgbe: add registers etc. printout code just before resetting adapters Taku Izumi
2010-04-19 11:25 ` [PATCH v3 1/3] e1000e: " Taku Izumi
2010-04-19 11:26 ` [PATCH v3 2/3] igb: " Taku Izumi
2010-04-19 11:28 ` Taku Izumi [this message]
2010-04-19 22:44 ` [PATCH v3 0/3] e1000e,igb,ixgbe: " Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BCC3E48.3000005@jp.fujitsu.com \
--to=izumi.taku@jp.fujitsu.com \
--cc=bruce.w.allan@intel.com \
--cc=chavey@google.com \
--cc=davem@davemloft.net \
--cc=jesse.brandeburg@intel.com \
--cc=john.ronciak@intel.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.