Re: Detail on 2.6.32.11 pv_ops not boot

[Jeremy Fitzhardinge <jeremy@goop.org>]

On 04/22/2010 03:17 AM, Fantu wrote:
> Here the full output of SOL with full debug option: 
> http://old.nabble.com/file/p28326903/xenboot-sol.log xenboot-sol.log 
>   

Thanks for that.  Does it always hang at the same place?  Your
screenshot shows it apparently hanging at ata_piix, whereas the sol log
shows a hang near serial setup (which doesn't seem to overlap with the
screenshot at all).

What does booting the same kernel natively show?

Thanks,
    J

>
> Fantu wrote:
>   
>> S.O. is Lenny 64 bit
>> Dom0 is xen 4 from hg-testing4.0
>> Kernel is 2.6.32.11 pv_ops update with this config: 
>> http://old.nabble.com/file/p28287956/.config .config 
>> Server is Dell T610 with bios 2.0.13
>>
>> I have start with all debug option found:
>> menuentry "Xen 4 hg-4.0-testing, linux 2.6.32.11 DEBUG" {
>> 	set root=(hd0,1)
>> 	multiboot /boot/xen-4.gz dom0_mem=1024M loglvl=all guest_loglvl=all
>> lapic=debug apic_verbosity=debug apic=debug iommu=off
>> 	module /boot/vmlinuz-2.6.32.11 root=LABEL=root-raid ro nomodeset
>> earlyprintk=xen nomodeset initcall_debug debug loglevel=10
>> 	module /boot/initrd.img-2.6.32.11
>> }
>>
>> The result is block here: 
>> http://old.nabble.com/file/p28287956/2.6.32.11_pv_ops_screen.jpg
>> 2.6.32.11_pv_ops_screen.jpg 
>>
>> Thanks in advantages for any help
>>
>>     
>