From: Anthony Liguori <anthony@codemonkey.ws>
To: Luiz Capitulino <lcapitulino@redhat.com>
Cc: qemu-devel@nongnu.org, armbru@redhat.com
Subject: Re: [Qemu-devel] [PATCH 2/2] QMP: Add 'reason' member to the BLOCK_IO_ERROR event
Date: Wed, 28 Apr 2010 18:24:29 -0500 [thread overview]
Message-ID: <4BD8C3AD.4080801@codemonkey.ws> (raw)
In-Reply-To: <1272486729-14771-3-git-send-email-lcapitulino@redhat.com>
On 04/28/2010 03:32 PM, Luiz Capitulino wrote:
> It's a parsable errno string representation, this is needed
> because some management tools want to base their action on
> the error cause.
>
> Signed-off-by: Luiz Capitulino<lcapitulino@redhat.com>
>
Does anyone differentiate beyond ENOSPC and EIO?
Regards,
Anthony Liguori
> ---
> QMP/qmp-events.txt | 4 +++-
> block.c | 8 +++++---
> block.h | 2 +-
> hw/ide/core.c | 6 +++---
> hw/scsi-disk.c | 6 +++---
> hw/virtio-blk.c | 6 +++---
> 6 files changed, 18 insertions(+), 14 deletions(-)
>
> diff --git a/QMP/qmp-events.txt b/QMP/qmp-events.txt
> index 01ec85f..47097fd 100644
> --- a/QMP/qmp-events.txt
> +++ b/QMP/qmp-events.txt
> @@ -14,13 +14,15 @@ Data:
> "ignore": error has been ignored
> "report": error has been reported to the device
> "stop": error caused VM to be stopped
> +- "reason": errno string representation (json-string)
>
> Example:
>
> { "event": "BLOCK_IO_ERROR",
> "data": { "device": "ide0-hd1",
> "operation": "write",
> - "action": "stop" },
> + "action": "stop",
> + "reason": "EINTR" },
> "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
>
> Note: If action is "stop", a STOP event will eventually follow the
> diff --git a/block.c b/block.c
> index 7974215..1179b1c 100644
> --- a/block.c
> +++ b/block.c
> @@ -1236,7 +1236,7 @@ int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
> }
>
> void bdrv_mon_event(const BlockDriverState *bdrv,
> - BlockMonEventAction action, int is_read)
> + BlockMonEventAction action, int error, int is_read)
> {
> QObject *data;
> const char *action_str;
> @@ -1255,10 +1255,12 @@ void bdrv_mon_event(const BlockDriverState *bdrv,
> abort();
> }
>
> - data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
> + data = qobject_from_jsonf("{ 'device': %s, 'action': %s, "
> + "'operation': %s, 'reason': %s }",
> bdrv->device_name,
> action_str,
> - is_read ? "read" : "write");
> + is_read ? "read" : "write",
> + get_errno_name(errno));
> monitor_protocol_event(QEVENT_BLOCK_IO_ERROR, data);
>
> qobject_decref(data);
> diff --git a/block.h b/block.h
> index 05ad572..9696081 100644
> --- a/block.h
> +++ b/block.h
> @@ -45,7 +45,7 @@ typedef enum {
> } BlockMonEventAction;
>
> void bdrv_mon_event(const BlockDriverState *bdrv,
> - BlockMonEventAction action, int is_read);
> + BlockMonEventAction action, int error, int is_read);
> void bdrv_info_print(Monitor *mon, const QObject *data);
> void bdrv_info(Monitor *mon, QObject **ret_data);
> void bdrv_stats_print(Monitor *mon, const QObject *data);
> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index 0757528..1ce0cdd 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -484,7 +484,7 @@ static int ide_handle_rw_error(IDEState *s, int error, int op)
> BlockInterfaceErrorAction action = drive_get_on_error(s->bs, is_read);
>
> if (action == BLOCK_ERR_IGNORE) {
> - bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
> + bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, error, is_read);
> return 0;
> }
>
> @@ -492,7 +492,7 @@ static int ide_handle_rw_error(IDEState *s, int error, int op)
> || action == BLOCK_ERR_STOP_ANY) {
> s->bus->bmdma->unit = s->unit;
> s->bus->bmdma->status |= op;
> - bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
> + bdrv_mon_event(s->bs, BDRV_ACTION_STOP, error, is_read);
> vm_stop(0);
> } else {
> if (op& BM_STATUS_DMA_RETRY) {
> @@ -501,7 +501,7 @@ static int ide_handle_rw_error(IDEState *s, int error, int op)
> } else {
> ide_rw_error(s);
> }
> - bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
> + bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, error, is_read);
> }
>
> return 1;
> diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
> index 77cb1da..1df9552 100644
> --- a/hw/scsi-disk.c
> +++ b/hw/scsi-disk.c
> @@ -182,19 +182,19 @@ static int scsi_handle_write_error(SCSIDiskReq *r, int error)
> BlockInterfaceErrorAction action = drive_get_on_error(s->bs, 0);
>
> if (action == BLOCK_ERR_IGNORE) {
> - bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, 0);
> + bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, error, 0);
> return 0;
> }
>
> if ((error == ENOSPC&& action == BLOCK_ERR_STOP_ENOSPC)
> || action == BLOCK_ERR_STOP_ANY) {
> r->status |= SCSI_REQ_STATUS_RETRY;
> - bdrv_mon_event(s->bs, BDRV_ACTION_STOP, 0);
> + bdrv_mon_event(s->bs, BDRV_ACTION_STOP, error, 0);
> vm_stop(0);
> } else {
> scsi_command_complete(r, CHECK_CONDITION,
> HARDWARE_ERROR);
> - bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, 0);
> + bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, error, 0);
> }
>
> return 1;
> diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
> index b05d15e..b0c504e 100644
> --- a/hw/virtio-blk.c
> +++ b/hw/virtio-blk.c
> @@ -65,7 +65,7 @@ static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
> VirtIOBlock *s = req->dev;
>
> if (action == BLOCK_ERR_IGNORE) {
> - bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
> + bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, error, is_read);
> return 0;
> }
>
> @@ -73,11 +73,11 @@ static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
> || action == BLOCK_ERR_STOP_ANY) {
> req->next = s->rq;
> s->rq = req;
> - bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
> + bdrv_mon_event(s->bs, BDRV_ACTION_STOP, error, is_read);
> vm_stop(0);
> } else {
> virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
> - bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
> + bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, error, is_read);
> }
>
> return 1;
>
next prev parent reply other threads:[~2010-04-28 23:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-28 20:32 [Qemu-devel] [PATCH 0/2]: QMP: expose errno in the BLOCK_IO_ERROR event Luiz Capitulino
2010-04-28 20:32 ` [Qemu-devel] [PATCH 1/2] qemu-error: Introduce get_errno_name() Luiz Capitulino
2010-05-03 13:06 ` Markus Armbruster
2010-05-03 13:16 ` Anthony Liguori
2010-05-04 13:56 ` Luiz Capitulino
2010-05-04 14:03 ` Anthony Liguori
2010-05-04 20:30 ` Luiz Capitulino
2010-05-04 21:56 ` Anthony Liguori
2010-05-05 15:00 ` Luiz Capitulino
2010-05-10 17:45 ` Markus Armbruster
2010-05-10 17:36 ` Markus Armbruster
2010-04-28 20:32 ` [Qemu-devel] [PATCH 2/2] QMP: Add 'reason' member to the BLOCK_IO_ERROR event Luiz Capitulino
2010-04-28 23:24 ` Anthony Liguori [this message]
2010-04-29 17:30 ` Luiz Capitulino
2010-05-03 13:14 ` Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BD8C3AD.4080801@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=armbru@redhat.com \
--cc=lcapitulino@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.