From: Vipin KUMAR <vipin.kumar@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support
Date: Fri, 30 Apr 2010 16:38:03 +0530 [thread overview]
Message-ID: <4BDABA13.2000307@st.com> (raw)
In-Reply-To: <1272250610-15439-1-git-send-email-vipin.kumar@st.com>
Hello Tom/Wolfgang,
Didn't see any feedbacks on this patchset.
Please let me know if the patch is good or should I make changes and resubmit
Thanks in advance
Regards
Vipin
On 4/26/2010 8:26 AM, Vipin KUMAR wrote:
> Hi,
> The following subpatches incorporate review comments given on patch-set v1.
> Please consider it for inclusion in mainline
>
> Thanks and Regards
> Vipin
>
> Vipin Kumar (17):
> u-boot.img file not created when srctree and objtree are different
> change_bit routine defined
> SPEAr : SMI erase and write timeouts increased
> SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET
> SPEAr : Reducing the max RAM size to 128MB
> SPEAr : Basic arch related support added for SPEAr SoCs
> SPEAr : Network driver support added
> SPEAr : Network support configured for spear SoCs
> SPEAr : macb driver support added for spear310 and spear320
> SPEAr : FSMC driver support added
> SPEAr : Configuring FSMC driver for NAND interface
> SPEAr : i2c driver moved completely into drivers/i2c
> SPEAr : smi driver moved completely into drivers/mtd
> SPEAr : USBD driver support added
> SPEAr : Basic spear1300 architecture support added
> SPEAr : spear1300 SoC support added
> SPEAr : Supporting various configurations for spear3xx and spear6xx
> boards
>
> Makefile | 24 +-
> arch/arm/cpu/arm926ejs/spear/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/spear/cpu.c | 76 +++
> arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 ++
> arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 112 ++++
> arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 99 ++++
> .../arm_cortexa8/spear13xx/reset.c} | 50 +--
> arch/arm/cpu/arm_cortexa8/spear13xx/timer.c | 136 +++++
> arch/arm/include/asm/arch-spear/clk.h | 27 +
> arch/arm/include/asm/arch-spear/hardware.h | 16 +-
> arch/arm/include/asm/arch-spear/spr_misc.h | 5 +
> arch/arm/include/asm/arch-spear13xx/hardware.h | 40 ++
> arch/arm/include/asm/arch-spear13xx/spr_gpt.h | 85 +++
> arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++
> arch/arm/include/asm/arch-spear13xx/sys_proto.h | 32 ++
> arch/arm/include/asm/bitops.h | 11 +-
> board/spear/common/Makefile | 10 +-
> board/spear/common/spr_misc.c | 23 +-
> board/spear/spear1300/Makefile | 51 ++
> board/spear/spear1300/config.mk | 28 +
> board/spear/spear1300/spear1300.c | 86 ++++
> .../spear/spear1300/spr_lowlevel_init.S | 49 +--
> board/spear/spear300/config.mk | 11 -
> board/spear/spear300/spear300.c | 10 +-
> board/spear/spear310/config.mk | 11 -
> board/spear/spear310/spear310.c | 17 +-
> board/spear/spear320/config.mk | 11 -
> board/spear/spear320/spear320.c | 14 +-
> board/spear/spear600/config.mk | 11 -
> board/spear/spear600/spear600.c | 10 +-
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +-
> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
> drivers/mtd/Makefile | 2 +-
> drivers/mtd/nand/Makefile | 2 +-
> drivers/mtd/nand/fsmc_nand.c | 365 +++++++++++++
> drivers/mtd/nand/spr_nand.c | 124 -----
> drivers/mtd/{spr_smi.c => st_smi.c} | 10 +-
> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 10 +-
> drivers/net/Makefile | 1 +
> drivers/net/designware.c | 537 ++++++++++++++++++++
> drivers/net/designware.h | 264 ++++++++++
> drivers/serial/usbtty.h | 4 +-
> drivers/usb/gadget/Makefile | 2 +-
> drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 116 +++--
> include/configs/spear-common.h | 27 +-
> include/configs/spear13xx.h | 199 ++++++++
> include/configs/spear3xx.h | 30 ++
> include/configs/spear6xx.h | 13 +
> include/linux/mtd/fsmc_nand.h | 104 ++++
> include/netdev.h | 1 +
> include/usb/{spr_udc.h => designware_udc.h} | 8 +-
> 52 files changed, 2918 insertions(+), 340 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c
> copy arch/arm/{include/asm/arch-spear/spr_nand.h => cpu/arm_cortexa8/spear13xx/reset.c} (51%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/timer.c
> create mode 100644 arch/arm/include/asm/arch-spear/clk.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/hardware.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_gpt.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/sys_proto.h
> create mode 100644 board/spear/spear1300/Makefile
> create mode 100644 board/spear/spear1300/config.mk
> create mode 100644 board/spear/spear1300/spear1300.c
> rename arch/arm/include/asm/arch-spear/spr_nand.h => board/spear/spear1300/spr_lowlevel_init.S (50%)
> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%)
> rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%)
> create mode 100644 drivers/mtd/nand/fsmc_nand.c
> delete mode 100644 drivers/mtd/nand/spr_nand.c
> rename drivers/mtd/{spr_smi.c => st_smi.c} (99%)
> rename arch/arm/include/asm/arch-spear/spr_smi.h => drivers/mtd/st_smi.h (95%)
> create mode 100644 drivers/net/designware.c
> create mode 100644 drivers/net/designware.h
> rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (91%)
> create mode 100644 include/configs/spear13xx.h
> create mode 100644 include/linux/mtd/fsmc_nand.h
> rename include/usb/{spr_udc.h => designware_udc.h} (98%)
>
>
next prev parent reply other threads:[~2010-04-30 11:08 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-26 2:56 [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 17/17] SPEAr : Supporting various configurations for spear3xx and spear6xx boards Vipin KUMAR
2010-05-03 0:38 ` Tom Rix
2010-05-03 7:59 ` Vipin KUMAR
2010-05-03 0:37 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC support added Tom Rix
2010-05-03 8:35 ` Vipin KUMAR
2010-05-03 10:19 ` Tom Rix
2010-05-03 11:17 ` Vipin KUMAR
2010-05-03 0:33 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Tom Rix
2010-05-03 11:14 ` Vipin KUMAR
2010-05-03 0:29 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver " Tom Rix
2010-05-03 0:27 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Tom Rix
2010-04-27 5:08 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Heiko Schocher
2010-05-03 0:25 ` Tom Rix
2010-05-04 9:07 ` Vipin KUMAR
2010-05-04 17:56 ` Scott Wood
2010-05-06 1:44 ` Vipin KUMAR
2010-05-05 21:37 ` Tom Rix
2010-05-06 2:08 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Scott Wood
2010-05-03 0:24 ` Tom Rix
2010-05-04 8:48 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Scott Wood
2010-05-03 0:22 ` Tom Rix
2010-05-04 8:08 ` Vipin KUMAR
2010-05-03 0:14 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Tom Rix
2010-05-04 8:01 ` Vipin KUMAR
2010-05-02 23:49 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Tom Rix
2010-05-04 7:15 ` Vipin KUMAR
2010-05-02 23:48 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Tom Rix
2010-05-04 6:33 ` Vipin KUMAR
2010-05-04 13:14 ` Tom Rix
2010-05-02 23:40 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Tom Rix
2010-05-04 5:57 ` Vipin KUMAR
2010-05-02 23:37 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Tom Rix
2010-05-04 5:50 ` Vipin KUMAR
2010-05-02 23:36 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Tom Rix
2010-05-04 5:34 ` Vipin KUMAR
2010-05-04 12:18 ` Tom Rix
2010-05-06 4:11 ` Vipin KUMAR
2010-05-06 22:28 ` Wolfgang Denk
2010-05-02 23:33 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Tom Rix
2010-05-04 3:43 ` Vipin KUMAR
2010-05-02 23:31 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Tom Rix
2010-05-04 1:54 ` Vipin KUMAR
2010-05-02 23:27 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Tom Rix
2010-04-30 11:08 ` Vipin KUMAR [this message]
2010-04-30 12:48 ` [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Tom Rix
2010-05-01 10:09 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BDABA13.2000307@st.com \
--to=vipin.kumar@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.