From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4BE0B79D.6070105@domain.hid> Date: Wed, 05 May 2010 02:11:09 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <8b216e9e1002100327h3aa332ddl13ec590fcb81f0b7@domain.hid> <8b216e9e1002121023qa0f4d6n33c773110cfc78fd@domain.hid> <4B759DF9.9040800@domain.hid> <4B759F35.3050704@domain.hid> <8b216e9e1002131157k6f1a7ccbiba5e67b8855c77b2@domain.hid> <4B770554.3080809@domain.hid> <8b216e9e1002131225v16024e66p521d7eaad376441d@domain.hid> <8b216e9e1002150919p250b5270tab0bf5f242e87a25@domain.hid> <4B799016.2040305@domain.hid> <8b216e9e1002151034n362f83afwfd6b9355ec071540@domain.hid> <8b216e9e1003020729t58db73fdv88d9927695baae75@domain.hid> <4B8D2F9D.3050500@domain.hid> In-Reply-To: <4B8D2F9D.3050500@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Problems when cross-compiling Xenomai List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: =?UTF-8?B?RmVsaXBlIEJyYW5kw6NvIENhdmFsY2FudGk=?= Cc: xenomai@xenomai.org, Gilles Chanteperdrix Gilles Chanteperdrix wrote: > No, will try and get a Xenomai-patched 2.6.30 running on IGEP real soon > now... However, ARM I-pipe patches for something more recent than 2.6.30 > should come soon, so, will not try really hard. > Hi Felipe, I finally had time to run Xenomai on IGEP. It almost worked out of the box (just had spurious irqs caused by the twl4030-irq driver using the I2C drive, a workaround being to disable the I2C irq line when writing to the I2C controller registers). If will be in the adeos-ipipe-2.6.33-arm-1.16-01 patch, for which you may have seen the pull request if you are subscribed to the adeos mailing list. And this patch will be part of the upcoming Xenomai 2.5.3 release, available real soon too (I mean today or tomorrow, no kidding). I am of course interested in your feedback. Thanks in advance. Regards. -- Gilles.