From: Gerry Reno <greno@verizon.net>
To: xen-devel@lists.xensource.com
Subject: Re: Cannot load latest 2.6.32.10 kernel on AMD quad-core
Date: Tue, 04 May 2010 20:42:15 -0400 [thread overview]
Message-ID: <4BE0BEE7.50007@verizon.net> (raw)
In-Reply-To: <4BDF3ED3.3050703@verizon.net>
[-- Attachment #1: Type: text/plain, Size: 3837 bytes --]
On 05/03/2010 05:23 PM, Gerry Reno wrote:
> On 05/03/2010 04:36 PM, Konrad Rzeszutek Wilk wrote:
>> On Mon, May 03, 2010 at 01:18:44PM -0400, Gerry Reno wrote:
>>> On 05/03/2010 12:18 PM, Konrad Rzeszutek Wilk wrote:
>>>> On Fri, Apr 23, 2010 at 01:50:40PM -0400, Gerry Reno wrote:
>>>>
>>>>> I previously had the pv_ops dom0 2.6.31.6 kernel built and running
>>>>> on my
>>>>> hardware (amd phenom ii x4 quad-core) just fine under karmic. But
>>>>> that
>>>>> kernel had issues with rxchecksumming. So I upgraded the server to
>>>>> lucid and am now trying to compile a new pv_ops dom0 kernel for it.
>>>>>
>>>>> Now, yesterday I carefully built the latest 2.6.32.10(xen/stable)
>>>>> pv_ops
>>>>> dom0 kernel twice. Once from the config in the email Lucid pv_ops
>>>>> dom0
>>>>> howto and once from the lucid server config modified by adding all
>>>>> the
>>>>>
>>>> Gerry,
>>>>
>>>> Can you attach your .config file ? I am not seeing it anywhere in the
>>>> thread. Also is this x86_64 or i386 build? If it is i386 do you have
>>>> CONFIG_NUMA enabled? If so, what happens if you disable that?
>>>>
>>>> Can you also tell me which Phenom it is? 940?
>>>>
>>>>
>>> Konrad, I attached my .config file and /proc/cpuinfo. The build was
>>> x86_64. The cpu is AMD Phenom II x4 940.
>> When I use your .config I get these:
>>
>> [ 10.781056] ------------[ cut here ]------------
>> [ 10.785736] WARNING: at
>> /home/konrad/git/neb.64/linux-up/mm/vmalloc.c:1AMD-BOOT #7
>> [ 10.790016] Call Trace:
>> [ 10.790016] [<ffffffff810660cb>] warn_slowpath_common+0x7b/0xc0
>> [ 10.790016] [<ffffffff81066124>] warn_slowpath_null+0x14/0x20
>> [ 10.790016] [<ffffffff8111bb19>] vmap_page_range_noflush+0x2d9/0x370
>> [ 10.790016] [<ffffffff8111cfaf>] ? __vmalloc_area_node+0x5f/0x190
>> [ 10.790016] [<ffffffff8100fadd>] ?
>> xen_force_evtchn_callback+0xd/0x10
>> [ 10.790016] [<ffffffff8111bbe2>] map_vm_area+0x32/0x50
>> [ 10.790016] [<ffffffff8111d050>] __vmalloc_area_node+0x100/0x190
>> [ 10.790016] [<ffffffff8111d0f7>] __vmalloc_area+0x17/0x20
>> [ 10.790016] [<ffffffff8103592e>] module_alloc+0x5e/0x60
>> [ 10.790016] [<ffffffff8109b8c6>]
>> module_alloc_update_bounds+0x16/0x50
>> [ 10.790016] [<ffffffff8109e479>] load_module+0x989/0x1ce0
>> [ 10.790016] [<ffffffff8113f8a5>] ? vfs_read+0xb5/0x1a0
>> [ 10.790016] [<ffffffff8109f849>] sys_init_module+0x79/0x250
>> [ 10.790016] [<ffffffff810140f2>] system_call_fastpath+0x16/0x1b
>> [ 10.790016] ---[ end trace a7919e7f17c0a727 ]---
>> FATAL: Error inserting xen_kbdfront
>> (/lib/modules/2.6.32.12AMD-BOOT/kernel/drivers/input/xen-kbdfront.ko):
>> Cannot allocate memory
>>
>> Is this about the same thing you see? (the calltrace being of interest
>> here).
>>
> The screen output goes by so fast I cannot tell if this call trace is
> in it. I'm still waiting for a serial card to show up so I can
> capture the output. When I boot the 2.6.32.10 kernel under Xen pv_ops
> dom0 it will either start showing "soft lockup" bugs or it just hangs
> after XENBUS: Unable to read cpu state. If I boot the 2.6.32.10
> kernel without Xen then it just hangs - no output at all.
>
> -Gerry
>
Finally, my serial port header cables showed up so I installed them and
now have some console output.
Case 1: Xen 4.0.0-rc8 / pv_ops dom0 kernel 2.6.32.10
After playing around with the order of the consoles on the xen and
kernel lines I am able to get a login prompt but only after quite a long
time (4-5 mins). It seems like something is stealing processor cycles.
And the behavior is not consistent, on different boots I get different
errors at times.
Case 1: pv_ops domU kernel 2.6.32.10 (no xen dom0)
The kernel shows a lot of errors and just hangs.
Attached: console output for both cases plus menu.lst
-Gerry
[-- Attachment #2: AMD_pvops_domU_console.txt --]
[-- Type: text/plain, Size: 26267 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.10 (root@grp-01-23-02) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Sat Apr0
[ 0.000000] Command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 vga=ext ro console=tty0,115200n8 consolet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000afde0000 (usable)
[ 0.000000] BIOS-e820: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afdf0000 - 00000000afe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000afde0000 (usable)
[ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000afde0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] RAMDISK: 33d29000 - 37fef12a
[ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afde0000 00040
[ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000055fff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a51864] TEXT DATA BSS ==> [0001000000 - 0001a51864]
[ 0.000000] #3 [0033d29000 - 0037fef12a] RAMDISK ==> [0033d29000 - 0037fef12a]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a52000 - 0001a520fe] BRK ==> [0001a52000 - 0001a520fe]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000afde0
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afde3000
[ 0.000000] PM: Registered nosave memory: 00000000afde3000 - 00000000afdf0000
[ 0.000000] PM: Registered nosave memory: 00000000afdf0000 - 00000000afe00000
[ 0.000000] PM: Registered nosave memory: 00000000afe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at afe00000 (gap: afe00000:30200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s91416 r8192 d23272 u524288
[ 0.000000] pcpu-alloc: s91416 r8192 d23272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1933972
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 vga=ext ro console=tty0,115200n8 t
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Memory: 7605344k/9175040k available (5523k kernel code, 1313304k absent, 256392k reserved, 3053k data, 8)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 78643200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.747 MHz processor.
[ 0.030006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.48 BogoMIPS (lpj=3013743)
[ 0.050017] Security Framework initialized
[ 0.054134] SELinux: Disabled at boot.
[ 0.058452] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.063393] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.071575] Mount-cache hash table entries: 256
[ 0.080121] Initializing cgroup subsys ns
[ 0.084147] Initializing cgroup subsys cpuacct
[ 0.090004] Initializing cgroup subsys memory
[ 0.094384] Initializing cgroup subsys devices
[ 0.100002] Initializing cgroup subsys freezer
[ 0.104466] Initializing cgroup subsys net_cls
[ 0.108943] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.110002] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.120003] CPU 0/0x0 -> Node 0
[ 0.123163] CPU: Physical Processor ID: 0
[ 0.127190] CPU: Processor Core ID: 0
[ 0.130002] mce: CPU supports 6 MCE banks
[ 0.134042] using C1E aware idle routine
[ 0.137986] Performance Events: AMD PMU driver.
[ 0.141521] ... version: 0
[ 0.145549] ... bit width: 48
[ 0.150001] ... generic registers: 4
[ 0.154024] ... value mask: 0000ffffffffffff
[ 0.160001] ... max period: 00007fffffffffff
[ 0.165330] ... fixed-purpose events: 0
[ 0.170001] ... event mask: 000000000000000f
[ 0.176667] ACPI: Core revision 20090903
[ 0.200029] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.210008] ftrace: allocating 21751 entries in 86 pages
[ 0.225172] Setting APIC routing to flat
[ 0.230490] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.336570] CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
[ 0.350000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.040000] Initializing CPU#1
[ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.040000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.040000] CPU 1/0x1 -> Node 0
[ 0.040000] CPU: Physical Processor ID: 0
[ 0.040000] CPU: Processor Core ID: 1
[ 0.500087] CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
[ 0.521266] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.530052] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.040000] Initializing CPU#2
[ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.040000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.040000] CPU 2/0x2 -> Node 0
[ 0.040000] CPU: Physical Processor ID: 0
[ 0.040000] CPU: Processor Core ID: 3
[ 0.700082] CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
[ 0.721263] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.730058] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.040000] Initializing CPU#3
[ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.040000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.040000] CPU 3/0x3 -> Node 0
[ 0.040000] CPU: Physical Processor ID: 0
[ 0.040000] CPU: Processor Core ID: 2
[ 0.900091] CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
[ 0.921264] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.930009] Brought up 4 CPUs
[ 0.940001] Total of 4 processors activated (24110.25 BogoMIPS).
[ 0.950170] devtmpfs: initialized
[ 0.954622] regulator: core version 0.5
[ 0.958500] Time: 0:10:44 Date: 05/05/10
[ 0.960041] NET: Registered protocol family 16
[ 0.964594] TOM: 00000000d0000000 aka 3328M
[ 0.970012] TOM2: 0000000230000000 aka 8960M
[ 0.974339] ACPI: bus type pci registered
[ 0.978424] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.980002] PCI: MCFG area at e0000000 reserved in E820
[ 0.995600] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.000001] PCI: Using configuration type 1 for base access
[ 1.006220] bio: create slab <bio-0> at 0
[ 1.020358] ACPI: Interpreter enabled
[ 1.024052] ACPI: (supports S0 S1 S4 S5)
[ 1.028207] ACPI: Using IOAPIC for interrupt routing
[ 1.033096] ACPI Warning: Incorrect checksum in table [��"�] - 00, should be A6 (20090903/tbutils-314)
[ 1.042365] ACPI: No dock devices found.
[ 1.046409] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.050128] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.060002] pci 0000:00:0a.0: PME# disabled
[ 1.064490] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.070003] pci 0000:00:12.2: PME# disabled
[ 1.074404] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.080004] pci 0000:00:13.2: PME# disabled
[ 1.084437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.090003] pci 0000:00:14.2: PME# disabled
[ 1.094608] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.100003] pci 0000:02:00.0: PME# disabled
[ 1.104387] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 1.110004] pci 0000:03:0e.0: PME# disabled
[ 1.114240] pci 0000:00:14.4: transparent bridge
[ 1.132377] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.140299] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.148292] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.153425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.163451] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.172355] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.180286] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.188293] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 1.193491] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.200002] vgaarb: loaded
[ 1.202810] SCSI subsystem initialized
[ 1.210142] usbcore: registered new interface driver usbfs
[ 1.215652] usbcore: registered new interface driver hub
[ 1.220016] usbcore: registered new device driver usb
[ 1.225157] ACPI: WMI: Mapper loaded
[ 1.230001] PCI: Using ACPI for IRQ routing
[ 1.234206] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 1.240001] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 1.250004] NetLabel: Initializing
[ 1.253432] NetLabel: domain hash size = 128
[ 1.257807] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.260009] NetLabel: unlabeled traffic allowed by default
[ 1.265630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 1.271470] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.281005] Switching to clocksource tsc
[ 1.285069] pnp: PnP ACPI init
[ 1.285069] ACPI: bus type pnp registered
[ 1.289814] pnp 00:0c: mem resource (0xd1c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 1.299767] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 1.309708] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 1.319646] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 1.329587] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 1.339181] pnp 00:0c: mem resource (0x100000-0xafddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 1.349524] pnp: PnP ACPI: found 13 devices
[ 1.353738] ACPI: ACPI bus type pnp unregistered
[ 1.358377] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.364773] system 00:01: ioport range 0x220-0x225 has been reserved
[ 1.371159] system 00:01: ioport range 0x290-0x294 has been reserved
[ 1.377523] system 00:02: ioport range 0x4100-0x411f has been reserved
[ 1.384089] system 00:02: ioport range 0x228-0x22f has been reserved
[ 1.390470] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 1.396832] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 1.403229] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 1.409597] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 1.415992] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 1.422370] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 1.428735] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 1.435128] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 1.441509] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 1.447871] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 1.454266] system 00:02: ioport range 0x4000-0x40fe has been reserved
[ 1.460818] system 00:02: ioport range 0x4210-0x4217 has been reserved
[ 1.467355] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 1.473748] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 1.480128] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 1.486493] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.493667] system 00:0c: iomem range 0xafde0000-0xafdfffff could not be reserved
[ 1.501182] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 1.508330] system 00:0c: iomem range 0xafef0000-0xcfeeffff could not be reserved
[ 1.515856] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.523369] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.530534] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved
[ 1.542754] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.548689] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 1.554050] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff
[ 1.560175] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.567754] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 1.573722] pci 0000:00:0a.0: IO window: 0xd000-0xdfff
[ 1.579047] pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff
[ 1.585181] pci 0000:00:0a.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 1.592775] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 1.598711] pci 0000:00:14.4: IO window: 0xc000-0xcfff
[ 1.604067] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff
[ 1.610193] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff
[ 1.616751] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.623549] NET: Registered protocol family 2
[ 1.628090] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.636549] ------------[ cut here ]------------
[ 1.641209] WARNING: at mm/vmalloc.c:110 vmap_page_range_noflush+0x301/0x380()
[ 1.648440] Hardware name: GA-MA790GP-UD4H
[ 1.652582] Modules linked in:
[ 1.655710] Pid: 1, comm: swapper Not tainted 2.6.32.10 #12
[ 1.661321] Call Trace:
[ 1.663801] [<ffffffff8106602b>] warn_slowpath_common+0x7b/0xc0
[ 1.669819] [<ffffffff81066084>] warn_slowpath_null+0x14/0x20
[ 1.675698] [<ffffffff8111bb31>] vmap_page_range_noflush+0x301/0x380
[ 1.682164] [<ffffffff8111bbe2>] map_vm_area+0x32/0x50
[ 1.687402] [<ffffffff8111d010>] __vmalloc_area_node+0x100/0x190
[ 1.693535] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222
[ 1.700172] [<ffffffff8111cf02>] __vmalloc_node+0xa2/0xb0
[ 1.705671] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222
[ 1.712324] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 1.717562] [<ffffffff8111d282>] __vmalloc+0x22/0x30
[ 1.722653] [<ffffffff81898700>] alloc_large_system_hash+0x15e/0x222
[ 1.729916] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 1.735186] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 1.740438] [<ffffffff818b44b6>] tcp_init+0xa3/0x383
[ 1.745505] [<ffffffff818b4bbd>] inet_init+0x14b/0x209
[ 1.750772] [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1a0
[ 1.756451] [<ffffffff8187972c>] kernel_init+0x15a/0x1b0
[ 1.761890] [<ffffffff810150ea>] child_rip+0xa/0x20
[ 1.766870] [<ffffffff818795d2>] ? kernel_init+0x0/0x1b0
[ 1.772307] [<ffffffff810150e0>] ? child_rip+0x0/0x20
[ 1.777461] ---[ end trace e93713a9d40cd06c ]---
[ 1.782160] general protection fault: 0000 [#1] SMP
[ 1.787242] last sysfs file:
[ 1.790234] CPU 0
[ 1.792115] Modules linked in:
[ 1.792115] Pid: 1, comm: swapper Tainted: G W 2.6.32.10 #12 GA-MA790GP-UD4H
[ 1.792115] RIP: 0010:[<ffffffff810f86ef>] [<ffffffff810f86ef>] __free_pages+0x1f/0x90
[ 1.792115] RSP: 0018:ffff8802278cbd20 EFLAGS: 00010282
[ 1.792115] RAX: ffffc90000c31000 RBX: 80000002f722ff85 RCX: 0000000000000010
[ 1.792115] RDX: 0000000000000200 RSI: 0000000000000000 RDI: 80000002f722ff85
[ 1.792115] RBP: ffff8802278cbd40 R08: 0000000000000004 R09: 0000000000000000
[ 1.792115] R10: ffff88000005ae80 R11: 0000000000000002 R12: 0000000000000000
[ 1.792115] R13: 0000000000000001 R14: ffffffffffffffff R15: 0000000000000020
[ 1.792115] FS: 0000000000000000(0000) GS:ffff880008a00000(0000) knlGS:0000000000000000
[ 1.792115] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1.792115] CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006f0
[ 1.792115] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.792115] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.792115] Process swapper (pid: 1, threadinfo ffff8802278ca000, task ffff8802278d0000)
[ 1.792115] Stack:
[ 1.792115] ffffc90011200000 0000000000000201 ffff880227b30b80 0000000000000001
[ 1.792115] <0> ffff8802278cbd70 ffffffff8111c42b ffffffffffffffff ffff880227b30b80
[ 1.792115] <0> 00000000ffffffff 0000000000000800 ffff8802278cbd80 ffffffff8111c51a
[ 1.792115] Call Trace:
[ 1.792115] [<ffffffff8111c42b>] __vunmap+0x7b/0x110
[ 1.792115] [<ffffffff8111c51a>] vfree+0x2a/0x30
[ 1.792115] [<ffffffff8111d06c>] __vmalloc_area_node+0x15c/0x190
[ 1.792115] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222
[ 1.792115] [<ffffffff8111cf02>] __vmalloc_node+0xa2/0xb0
[ 1.792115] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222
[ 1.792115] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 1.792115] [<ffffffff8111d282>] __vmalloc+0x22/0x30
[ 1.792115] [<ffffffff81898700>] alloc_large_system_hash+0x15e/0x222
[ 1.792115] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 1.792115] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 1.792115] [<ffffffff818b44b6>] tcp_init+0xa3/0x383
[ 1.792115] [<ffffffff818b4bbd>] inet_init+0x14b/0x209
[ 1.792115] [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1a0
[ 1.792115] [<ffffffff8187972c>] kernel_init+0x15a/0x1b0
[ 1.792115] [<ffffffff810150ea>] child_rip+0xa/0x20
[ 1.792115] [<ffffffff818795d2>] ? kernel_init+0x0/0x1b0
[ 1.792115] [<ffffffff810150e0>] ? child_rip+0x0/0x20
[ 1.792115] Code: d0 49 8b 04 24 48 85 c0 75 ec eb c5 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 0f
[ 1.792115] RIP [<ffffffff810f86ef>] __free_pages+0x1f/0x90
[ 1.792115] RSP <ffff8802278cbd20>
[ 2.054400] ---[ end trace e93713a9d40cd06d ]---
[ 2.059042] Kernel panic - not syncing: Attempted to kill init!
[ 2.064998] Pid: 1, comm: swapper Tainted: G D W 2.6.32.10 #12
[ 2.071375] Call Trace:
[ 2.073848] [<ffffffff8155a818>] panic+0x78/0x137
[ 2.078657] [<ffffffff81063540>] ? mm_release+0x60/0x120
[ 2.084099] [<ffffffff8106a54a>] do_exit+0x6ca/0x7f0
[ 2.089167] [<ffffffff8155ea10>] oops_end+0xb0/0xf0
[ 2.094171] [<ffffffff8101805b>] die+0x5b/0x90
[ 2.098717] [<ffffffff8155e592>] do_general_protection+0x152/0x160
[ 2.105022] [<ffffffff8155dd55>] general_protection+0x25/0x30
[ 2.110879] [<ffffffff810f86ef>] ? __free_pages+0x1f/0x90
[ 2.116377] [<ffffffff8111c42b>] __vunmap+0x7b/0x110
[ 2.121469] [<ffffffff8111c51a>] vfree+0x2a/0x30
[ 2.126191] [<ffffffff8111d06c>] __vmalloc_area_node+0x15c/0x190
[ 2.132322] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222
[ 2.138945] [<ffffffff8111cf02>] __vmalloc_node+0xa2/0xb0
[ 2.144474] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222
[ 2.151113] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 2.156350] [<ffffffff8111d282>] __vmalloc+0x22/0x30
[ 2.161443] [<ffffffff81898700>] alloc_large_system_hash+0x15e/0x222
[ 2.167893] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 2.173159] [<ffffffff818b4a72>] ? inet_init+0x0/0x209
[ 2.178400] [<ffffffff818b44b6>] tcp_init+0xa3/0x383
[ 2.183491] [<ffffffff818b4bbd>] inet_init+0x14b/0x209
[ 2.188730] [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1a0
[ 2.194428] [<ffffffff8187972c>] kernel_init+0x15a/0x1b0
[ 2.199840] [<ffffffff810150ea>] child_rip+0xa/0x20
[ 2.204848] [<ffffffff818795d2>] ? kernel_init+0x0/0x1b0
[ 2.210273] [<ffffffff810150e0>] ? child_rip+0x0/0x20
GR: kernel is hung right here
[-- Attachment #3: menu.lst --]
[-- Type: text/plain, Size: 1344 bytes --]
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/VolGroup01/LogVol00
# initrd /initrd-version.img
#boot=/dev/md0
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Ubuntu UEC-Node kernel 2.6.32.10 (pv_ops domU)
root (hd4,0)
kernel /vmlinuz-2.6.32.10 root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 vga=ext ro console=tty0,115200n8 console=ttyS0,115200n8 text
initrd /initrd.img-2.6.32.10
title Ubuntu UEC-Node kernel 2.6.32.10 (pv_ops dom0)
root (hd4,0)
kernel /xen-4.0.0-rc8.gz dummy=dummy dom0_mem=1024M vga=text-80x50 loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1
module /vmlinuz-2.6.32.10 root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen console=hvc0,115200n8 console=tty0,115200n8 nomodeset text
module /initrd.img-2.6.32.10
title Ubuntu UEC-Node (Lucid Lynx) 2.6.32-21 (domU)
root (hd4,0)
kernel /vmlinuz-2.6.32-21-server root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 ro console=tty0,115200n8 console=ttyS0,115200n8 text
initrd /initrd.img-2.6.32-21-server
[-- Attachment #4: AMD_pvops_dom0_console.txt --]
[-- Type: text/plain, Size: 57717 bytes --]
__ __ _ _ ___ ___ ___
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___( _ )
\ // _ \ '_ \ | || |_| | | | | | |__| '__/ __/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (_| (_) |
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___\___/
(XEN) Xen version 4.0.0-rc8 (root@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Sat Apr 24 11:56:47 EDT 2010
(XEN) Latest ChangeSet: Fri Mar 26 10:29:38 2010 +0000 21074:542211ba675c
(XEN) Console output is synchronous.
(XEN) Command line: dummy=dummy dom0_mem=1024M vga=text-80x50 loglvl=all guest_loglvl=all sync_console console_to_rin1
(XEN) Video information:
(XEN) VGA is text mode 80x50, font 8x8
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) EDID info not retrieved because of reasons unknown
(XEN) Disc information:
(XEN) Found 6 MBR signatures
(XEN) Found 6 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000afde0000 (usable)
(XEN) 00000000afde0000 - 00000000afde3000 (ACPI NVS)
(XEN) 00000000afde3000 - 00000000afdf0000 (ACPI data)
(XEN) 00000000afdf0000 - 00000000afe00000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000230000000 (usable)
(XEN) ACPI: RSDP 000F75D0, 0014 (r0 GBT )
(XEN) ACPI: RSDT AFDE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
(XEN) ACPI: FACP AFDE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
(XEN) ACPI: DSDT AFDE30C0, 6E65 (r1 GBT GBTUACPI 1000 MSFT 3000000)
(XEN) ACPI: FACS AFDE0000, 0040
(XEN) ACPI: HPET AFDEA000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
(XEN) ACPI: MCFG AFDEA040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
(XEN) ACPI: TAMG AFDEA080, 030A (r1 GBT GBT B0 5455312E BG53450101)
(XEN) ACPI: APIC AFDE9F40, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
(XEN) System RAM: 7433MB (7612124kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000230000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f5c30
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x4008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[4004,0], pm1x_evt[4000,0]
(XEN) ACPI: wakeup_vec[afde000c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 0:4 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10b9a201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3013.821 MHz processor.
(XEN) Initing memory sharing.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 32 KiB.
(XEN) do_IRQ: 1.231 No irq handler for vector (irq -1)
(XEN) do_IRQ: 3.231 No irq handler for vector (irq -1)
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) do_IRQ: 2.231 No irq handler for vector (irq -1)
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) HPET: 4 timers in total, 3 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a72000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000210000000->0000000220000000 (196608 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81a72000
(XEN) Init. ramdisk: ffffffff81a72000->ffffffff8f7d1600
(XEN) Phys-Mach map: ffffffff8f7d2000->ffffffff8f9d2000
(XEN) Start info: ffffffff8f9d2000->ffffffff8f9d24b4
(XEN) Page tables: ffffffff8f9d3000->ffffffff8fa54000
(XEN) Boot stack: ffffffff8fa54000->ffffffff8fa55000
(XEN) TOTAL: ffffffff80000000->ffffffff8fc00000
(XEN) ENTRY ADDRESS: ffffffff81879200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: ..................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 164kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.10 (root@grp-01-23-02) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Sat Apr0
[ 0.000000] Command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen console=hvt
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 40000-afde0: 0 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn afe00-e0000: 0 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn f0000-fec00: 0 pages freed
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[ 0.000000] Xen: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[ 0.000000] Xen: 00000000afdf0000 - 00000000afe00000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] RAMDISK: 01a72000 - 0f7d1600
[ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afde0000 00040
[ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000040000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000040000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000cfff]
[ 0.000000] bootmap [000000000000d000 - 0000000000014fff] pages 8
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000f9d3000 - 000fa54000] XEN PAGETABLES ==> [000f9d3000 - 000fa54000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001a51864] TEXT DATA BSS ==> [0001000000 - 0001a51864]
[ 0.000000] #4 [0001a72000 - 000f7d1600] RAMDISK ==> [0001a72000 - 000f7d1600]
[ 0.000000] #5 [000f7d2000 - 000f9d3000] XEN START INFO ==> [000f7d2000 - 000f9d3000]
[ 0.000000] #6 [0001a52000 - 0001a520fe] BRK ==> [0001a52000 - 0001a520fe]
[ 0.000000] #7 [0000100000 - 000027e000] PGTABLE ==> [0000100000 - 000027e000]
[ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:6fde0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.0-rc8 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa8a000 s91416 r8192 d23272 u122880
[ 0.000000] pcpu-alloc: s91416 r8192 d23272 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258073
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen cont
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880010c3f000 - ffff880014c3f000
[ 0.000000] DMA: software IO TLB at phys 0x10c3f000 - 0x14c3f000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880010c3f000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880014c9f000 size=32768
[ 0.000000] Memory: 725700k/1048576k available (5523k kernel code, 408k absent, 322468k reserved, 3053k data, 800k i)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1280
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] Already setup the GSI :9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.10 (root@grp-01-23-02) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Sat Apr0
[ 0.000000] Command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen console=hvt
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 40000-afde0: 0 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn afe00-e0000: 0 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn f0000-fec00: 0 pages freed
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[ 0.000000] Xen: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[ 0.000000] Xen: 00000000afdf0000 - 00000000afe00000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] RAMDISK: 01a72000 - 0f7d1600
[ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afde0000 00040
[ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000040000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000040000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000cfff]
[ 0.000000] bootmap [000000000000d000 - 0000000000014fff] pages 8
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000f9d3000 - 000fa54000] XEN PAGETABLES ==> [000f9d3000 - 000fa54000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001a51864] TEXT DATA BSS ==> [0001000000 - 0001a51864]
[ 0.000000] #4 [0001a72000 - 000f7d1600] RAMDISK ==> [0001a72000 - 000f7d1600]
[ 0.000000] #5 [000f7d2000 - 000f9d3000] XEN START INFO ==> [000f7d2000 - 000f9d3000]
[ 0.000000] #6 [0001a52000 - 0001a520fe] BRK ==> [0001a52000 - 0001a520fe]
[ 0.000000] #7 [0000100000 - 000027e000] PGTABLE ==> [0000100000 - 000027e000]
[ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:6fde0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.0-rc8 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa8a000 s91416 r8192 d23272 u122880
[ 0.000000] pcpu-alloc: s91416 r8192 d23272 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258073
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen cont
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880010c3f000 - ffff880014c3f000
[ 0.000000] DMA: software IO TLB at phys 0x10c3f000 - 0x14c3f000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880010c3f000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880014c9f000 size=32768
[ 0.000000] Memory: 725700k/1048576k available (5523k kernel code, 408k absent, 322468k reserved, 3053k data, 800k i)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1280
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] Already setup the GSI :9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x50
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] installing Xen timer for CPU 0
(XEN) traps.c:2309:d0 Domain attempted WRMSR 00000000c0010004 from 00000270:e8597444 to 00000000:00000000.
(XEN) traps.c:2309:d0 Domain attempted WRMSR 00000000c0010000 from 00000000:00030076 to 00000000:00430076.
[ 0.000000] Detected 3579879.094 MHz processor.
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.64 BogoMIPS (lpj=3013820)
[ 0.010031] Security Framework initialized
[ 0.014199] SELinux: Disabled at boot.
[ 0.018367] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.020085] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.027303] Mount-cache hash table entries: 256
[ 0.030138] Initializing cgroup subsys ns
[ 0.034191] Initializing cgroup subsys cpuacct
[ 0.038774] Initializing cgroup subsys memory
[ 0.040000] Initializing cgroup subsys devices
[ 0.040000] Initializing cgroup subsys freezer
[ 0.040000] Initializing cgroup subsys net_cls
[ 0.040025] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.047277] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.050000] CPU 0/0x0 -> Node 0
[ 0.050006] CPU: Physical Processor ID: 0
[ 0.054124] CPU: Processor Core ID: 0
[ 0.057947] Performance Events: AMD PMU driver.
[ 0.060000] ------------[ cut here ]------------
[ 0.060000] WARNING: at arch/x86/xen/enlighten.c:722 xen_apic_write+0x1a/0x20()
[ 0.060000] Hardware name: GA-MA790GP-UD4H
[ 0.060000] Modules linked in:
[ 0.060000] Pid: 0, comm: swapper Not tainted 2.6.32.10 #12
[ 0.060000] Call Trace:
[ 0.060000] [<ffffffff8106602b>] warn_slowpath_common+0x7b/0xc0
[ 0.060000] [<ffffffff81066084>] warn_slowpath_null+0x14/0x20
[ 0.060000] [<ffffffff8100b40a>] xen_apic_write+0x1a/0x20
[ 0.060000] [<ffffffff81021cc6>] perf_events_lapic_init+0x36/0x40
[ 0.060000] [<ffffffff81882432>] init_hw_perf_events+0x311/0x3ae
[ 0.060000] [<ffffffff81882092>] identify_boot_cpu+0x3c/0x3e
[ 0.060000] [<ffffffff818820fd>] check_bugs+0x9/0x2d
[ 0.060000] [<ffffffff81879d84>] start_kernel+0x3d7/0x3f7
[ 0.060000] [<ffffffff8187933a>] x86_64_start_reservations+0x125/0x129
[ 0.060000] [<ffffffff8187d19d>] xen_start_kernel+0x6ab/0x6b2
[ 0.060007] ---[ end trace a7919e7f17c0a725 ]---
[ 0.064773] ... version: 0
[ 0.068914] ... bit width: 48
[ 0.070000] ... generic registers: 4
[ 0.070000] ... value mask: 0000ffffffffffff
[ 0.070000] ... max period: 00007fffffffffff
[ 0.070000] ... fixed-purpose events: 0
[ 0.070000] ... event mask: 000000000000000f
[ 0.070000] SMP alternatives: switching to UP code
[ 0.070000] ACPI: Core revision 20090903
[ 0.080046] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.085906] ftrace: allocating 21751 entries in 86 pages
[ 0.090081] cpu 0 spinlock event irq 1278
[ 0.095201] installing Xen timer for CPU 1
[ 0.099408] cpu 1 spinlock event irq 1272
[ 0.100021] SMP alternatives: switching to SMP code
[ 0.000017] Initializing CPU#1
[ 0.000063] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000065] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000067] CPU 1/0x0 -> Node 0
[ 0.000069] CPU: Physical Processor ID: 0
[ 0.000070] CPU: Processor Core ID: 1
[ 0.110190] installing Xen timer for CPU 2
[ 0.120013] cpu 2 spinlock event irq 1266
[ 0.000014] Initializing CPU#2
[ 0.000066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000069] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000071] CPU 2/0x0 -> Node 0
[ 0.000073] CPU: Physical Processor ID: 0
[ 0.000074] CPU: Processor Core ID: 3
[ 0.124284] installing Xen timer for CPU 3
[ 0.130013] cpu 3 spinlock event irq 1260
[ 0.000014] Initializing CPU#3
[ 0.000059] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000062] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000064] CPU 3/0x0 -> Node 0
[ 0.000066] CPU: Physical Processor ID: 0
[ 0.000067] CPU: Processor Core ID: 2
[ 0.134281] Brought up 4 CPUs
[ 0.140143] devtmpfs: initialized
[ 0.144593] Grant table initialized
[ 0.148145] regulator: core version 0.5
[ 0.150000] Time: 23:47:59 Date: 05/04/10
[ 0.150039] NET: Registered protocol family 16
[ 0.154689] TOM: 00000000d0000000 aka 3328M
[ 0.158954] TOM2: 0000000230000000 aka 8960M
[ 0.160033] ACPI: bus type pci registered
[ 0.164136] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.170000] PCI: MCFG area at e0000000 reserved in E820
[ 0.199638] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.200000] PCI: Using configuration type 1 for base access
[ 0.200710] bio: create slab <bio-0> at 0
[ 0.205749] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.219518] ACPI: Interpreter enabled
[ 0.220000] ACPI: (supports S0 S1 S4 S5)
[ 0.220000] ACPI: Using IOAPIC for interrupt routing
[ 0.224951] ACPI: No dock devices found.
[ 0.229090] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.230257] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.236426] pci 0000:00:0a.0: PME# disabled
[ 0.240432] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.246533] pci 0000:00:12.2: PME# disabled
[ 0.250288] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.256422] pci 0000:00:13.2: PME# disabled
[ 0.260345] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.266527] pci 0000:00:14.2: PME# disabled
[ 0.270791] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.277532] pci 0000:02:00.0: PME# disabled
[ 0.280250] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.286384] pci 0000:03:0e.0: PME# disabled
[ 0.290038] pci 0000:00:14.4: transparent bridge
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:0a.0
(XEN) PCI add device 00:11.0
(XEN) PCI add device 00:12.0
(XEN) PCI add device 00:12.1
(XEN) PCI add device 00:12.2
(XEN) PCI add device 00:13.0
(XEN) PCI add device 00:13.1
(XEN) PCI add device 00:13.2
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.1
(XEN) PCI add device 00:14.2
(XEN) PCI add device 00:14.3
(XEN) PCI add device 00:14.4
(XEN) PCI add device 00:14.5
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 01:05.0
(XEN) PCI add device 01:05.1
(XEN) PCI add device 02:00.0
(XEN) PCI add device 03:0e.0
[ 0.367968] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.370083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.377650] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.380080] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.387617] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.390080] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.397623] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.400081] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.407668] xen_balloon: Initialising balloon driver with page order 0.
[ 0.410069] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.418302] vgaarb: loaded
[ 0.420098] SCSI subsystem initialized
[ 0.424102] usbcore: registered new interface driver usbfs
[ 0.429696] usbcore: registered new interface driver hub
[ 0.430023] usbcore: registered new device driver usb
[ 0.435271] ACPI: WMI: Mapper loaded
[ 0.438914] PCI: Using ACPI for IRQ routing
[ 0.440000] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.440000] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.440075] NetLabel: Initializing
[ 0.443576] NetLabel: domain hash size = 128
[ 0.448065] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.450000] NetLabel: unlabeled traffic allowed by default
[ 0.450067] Switching to clocksource xen
[ 0.454221] pnp: PnP ACPI init
[ 0.454734] ACPI: bus type pnp registered
[ 0.459856] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.465242] Already setup the GSI :8
[ 0.469085] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.474631] Already setup the GSI :13
[ 0.478937] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.484319] Already setup the GSI :4
[ 0.488148] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.493706] Already setup the GSI :12
[ 0.497548] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.502919] Already setup the GSI :1
[ 0.507005] pnp 00:0c: mem resource (0xd1c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.512916] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.512916] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.512916] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.512916] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.512916] pnp 00:0c: mem resource (0x100000-0xafddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.567842] pnp: PnP ACPI: found 13 devices
[ 0.572091] ACPI: ACPI bus type pnp unregistered
[ 0.576803] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.582083] system 00:01: ioport range 0x220-0x225 has been reserved
[ 0.582083] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.596331] system 00:02: ioport range 0x4100-0x411f has been reserved
[ 0.603016] system 00:02: ioport range 0x228-0x22f has been reserved
[ 0.606323] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.606323] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.606323] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.606323] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.606323] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.606323] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.606323] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 0.606323] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 0.606323] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 0.606323] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 0.606323] system 00:02: ioport range 0x4000-0x40fe has been reserved
[ 0.606323] system 00:02: ioport range 0x4210-0x4217 has been reserved
[ 0.606323] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 0.606323] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 0.700945] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 0.707408] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.714692] system 00:0c: iomem range 0xafde0000-0xafdfffff could not be reserved
[ 0.722319] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.724684] system 00:0c: iomem range 0xafef0000-0xcfeeffff has been reserved
[ 0.724684] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.724684] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.724684] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.762269] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.769036] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.770004] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.770004] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff
[ 0.770004] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.770004] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 0.770004] pci 0000:00:0a.0: IO window: 0xd000-0xdfff
[ 0.770004] pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.770004] pci 0000:00:0a.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.770004] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.770004] pci 0000:00:14.4: IO window: 0xc000-0xcfff
[ 0.770004] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff
[ 0.770004] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff
[ 0.845278] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.852161] NET: Registered protocol family 2
[ 0.856716] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.864551] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.872772] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.879884] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.882706] TCP reno registered
[ 0.889969] NET: Registered protocol family 1
[ 0.924415] Trying to unpack rootfs image as initramfs...
[ 1.130546] Freeing initrd memory: 226685k freed
[ 1.229176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.230046] DMA: Placing 64MB software IO TLB between ffff880010c3f000 - ffff880014c3f000
[ 1.230046] DMA: software IO TLB at phys 0x10c3f000 - 0x14c3f000
[ 1.250625] Scanning for low memory corruption every 60 seconds
[ 1.256837] audit: initializing netlink socket (disabled)
[ 1.262310] type=2000 audit(1273016881.682:1): initialized
[ 1.273991] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.281733] VFS: Disk quotas dquot_6.5.2
[ 1.285789] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.292923] fuse init (API version 7.13)
[ 1.296971] msgmni has been set to 1860
[ 1.301111] alg: No test for stdrng (krng)
[ 1.305308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.310887] io scheduler noop registered
[ 1.310887] io scheduler anticipatory registered
[ 1.310887] io scheduler deadline registered (default)
[ 1.327003] io scheduler cfq registered
[ 1.331295] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.337010] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.343932] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.352403] ACPI: Power Button [PWRB]
[ 1.356273] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.363780] ACPI: Power Button [PWRF]
[ 1.369700] Event-channel device installed.
[ 1.377742] blktap_device_init: blktap device major 253
[ 1.383036] blktap_ring_init: blktap ring major: 252
[ 1.388828] registering netback
[ 1.393379] hpet_acpi_add: no address or irqs in _CRS
[ 1.398534] Linux agpgart interface v0.103
[ 1.402131] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.410263] brd: module loaded
[ 1.413803] loop: module loaded
[ 1.417122] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.425157] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.432781] Fixed MDIO Bus: probed
[ 1.436339] PPP generic driver version 2.4.2
[ 1.440770] tun: Universal TUN/TAP device driver, 1.6
[ 1.445900] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.452314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.459000] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.462246] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.471626] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.479226] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.481597] ehci_hcd 0000:00:12.2: debug port 1
[ 1.481597] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.510037] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.515983] usb usb1: configuration #1 chosen from 1 choice
[ 1.521700] hub 1-0:1.0: USB hub found
[ 1.525557] hub 1-0:1.0: 6 ports detected
[ 1.529766] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.531675] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.542439] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.550009] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.557635] ehci_hcd 0000:00:13.2: debug port 1
[ 1.562355] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.580041] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.585974] usb usb2: configuration #1 chosen from 1 choice
[ 1.591636] hub 2-0:1.0: USB hub found
[ 1.595514] hub 2-0:1.0: 6 ports detected
[ 1.599698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.606018] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.611603] Already setup the GSI :16
[ 1.615358] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.621600] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.628062] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.635645] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.684112] usb usb3: configuration #1 chosen from 1 choice
[ 1.689773] hub 3-0:1.0: USB hub found
[ 1.693666] hub 3-0:1.0: 3 ports detected
[ 1.697909] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.703488] Already setup the GSI :16
[ 1.707224] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.713483] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.719923] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.760108] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.824190] usb usb4: configuration #1 chosen from 1 choice
[ 1.829953] hub 4-0:1.0: USB hub found
[ 1.833860] hub 4-0:1.0: 3 ports detected
[ 1.838107] xen_allocate_pirq: returning irq 18 for gsi 18
[ 1.843780] Already setup the GSI :18
[ 1.847576] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.853775] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.860628] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.900141] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.964199] usb usb5: configuration #1 chosen from 1 choice
[ 1.969965] hub 5-0:1.0: USB hub found
[ 1.973951] hub 5-0:1.0: 3 ports detected
[ 1.978206] xen_allocate_pirq: returning irq 18 for gsi 18
[ 1.983878] Already setup the GSI :18
[ 1.987765] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.993874] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.000826] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.040121] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 2.104190] usb usb6: configuration #1 chosen from 1 choice
[ 2.110005] hub 6-0:1.0: USB hub found
[ 2.113995] hub 6-0:1.0: 3 ports detected
[ 2.118353] xen_allocate_pirq: returning irq 18 for gsi 18
[ 2.124017] Already setup the GSI :18
[ 2.127888] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.134011] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.140853] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.180112] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 2.244195] usb usb7: configuration #1 chosen from 1 choice
[ 2.250033] hub 7-0:1.0: USB hub found
[ 2.254000] hub 7-0:1.0: 2 ports detected
[ 2.258274] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.264988] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.273350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.278456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.283766] mice: PS/2 mouse device common for all mice
[ 2.289239] rtc_cmos 00:05: RTC can wake from S4
[ 2.294095] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.300519] rtc0: alarms up to one month, 242 bytes nvram
[ 2.306267] device-mapper: uevent: version 1.0.3
[ 2.311045] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.319921] device-mapper: multipath: version 1.1.0 loaded
[ 2.325539] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.332609] cpuidle: using governor ladder
[ 2.336815] cpuidle: using governor menu
[ 2.341098] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.341322] TCP cubic registered
[ 2.341420] NET: Registered protocol family 10
[ 2.341867] lo: Disabled Privacy Extensions
[ 2.342109] NET: Registered protocol family 17
[ 2.368274] powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor processors (4 cpu cores) (version 2.20.00)
[ 2.378629] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 2.378630] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 2.393097] registered taskstats version 1
[ 2.397725] Magic number: 10:968:806
[ 2.401706] rtc_cmos 00:05: setting system clock to 2010-05-04 23:48:02 UTC (1273016882)
[ 2.410082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.411678] EDD information not available.
[ 2.420862] Freeing unused kernel memory: 800k freed
[ 2.426201] Write protecting the kernel read-only data: 7796k
[ 2.466932] udev: starting version 151
[ 2.485935] md: linear personality registered for level -1
[ 2.531017] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.538168] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.540011] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.572272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.578074] xen_allocate_pirq: returning irq 18 for gsi 18
[ 2.583868] Already setup the GSI :18
[ 2.587711] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.595713] eth0: RTL8168c/8111c at 0xffffc900001ee000, 00:24:1d:19:05:df, XID 1c4000c0 IRQ 1251
[ 2.608296] xen_allocate_pirq: returning irq 22 for gsi 22
[ 2.614107] Already setup the GSI :22
[ 2.617916] ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.633818] md: multipath personality registered for level -4
[ 2.642652] scsi0 : ahci
[ 2.645423] scsi1 : ahci
[ 2.648183] scsi2 : ahci
[ 2.650992] scsi3 : ahci
[ 2.653750] scsi4 : ahci
[ 2.656424] scsi5 : ahci
[ 2.659292] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
[ 2.666799] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.674553] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.682239] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.689821] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 2.691136] md: raid0 personality registered for level 0
[ 2.692230] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 2.710642] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdcff000-fdcff7ff] Max Packet=[2048] IR/IT co]
[ 2.722893] scsi6 : pata_atiixp
[ 2.726262] scsi7 : pata_atiixp
[ 2.730653] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.732343] md: raid1 personality registered for level 1
[ 2.740005] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.940512] ata7.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 2.980480] ata7.01: configured for UDMA/33
[ 3.280065] ata2: softreset failed (device not ready)
[ 3.285263] ata2: applying SB600 PMP SRST workaround and retrying
[ 3.291611] ata4: softreset failed (device not ready)
[ 3.291637] ata5: softreset failed (device not ready)
[ 3.291640] ata5: applying SB600 PMP SRST workaround and retrying
[ 3.291669] ata3: softreset failed (device not ready)
[ 3.291671] ata3: applying SB600 PMP SRST workaround and retrying
[ 3.291708] ata6: softreset failed (device not ready)
[ 3.291710] ata6: applying SB600 PMP SRST workaround and retrying
[ 3.301603] ata4: applying SB600 PMP SRST workaround and retrying
[ 3.490054] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.490074] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.500059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.500101] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.515570] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.522156] ata4.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133
[ 3.522300] ata3.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133
[ 3.522303] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.523434] ata3.00: configured for UDMA/133
[ 3.526116] ata6.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 3.526118] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.527129] ata6.00: configured for UDMA/133
[ 3.542295] ata2.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133
[ 3.542297] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.543399] ata2.00: configured for UDMA/133
[ 3.545940] ata5.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 3.545942] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.546929] ata5.00: configured for UDMA/133
[ 3.532150] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.613341] ata4.00: configured for UDMA/133
[ 3.770050] ata1: softreset failed (device not ready)
[ 3.775188] ata1: applying SB600 PMP SRST workaround and retrying
[ 3.950042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.982972] ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133
[ 3.990140] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.998504] ata1.00: configured for UDMA/133
[ 4.020125] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5
[ 4.028570] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.034183] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5
[ 4.035981] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.036027] sd 0:0:0:0: [sda] Write Protect is off
[ 4.036052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.036178] sda:
[ 4.056980] sda1 sda2 sda3
[ 4.068876] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.068881] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.068924] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.068949] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.069060] sdb:
[ 4.069148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.091224] sdb1 sdb2 sdb3
[ 4.105355] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5
[ 4.105424] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.118303] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.118310] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.118352] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.118375] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.118493] sdc: sdc1
[ 4.147669] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5
[ 4.147719] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.160577] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.160586] sd 3:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.160628] sd 3:0:0:0: [sdd] Write Protect is off
[ 4.160651] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.160771] sdd: sdd1
[ 4.189922] scsi 4:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 4.189994] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 4.202814] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 4.202824] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.202866] sd 4:0:0:0: [sde] Write Protect is off
[ 4.202889] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.203005] sde: sde1 sde2 sde3
[ 4.233036] scsi 5:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 4.233103] sd 4:0:0:0: [sde] Attached SCSI disk
[ 4.246724] sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.246724] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 4.260015] sd 5:0:0:0: [sdf] Write Protect is off
[ 4.264930] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.274236] scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 4.274340] sdf:sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 4.296879] Uniform CD-ROM driver Revision: 3.20
[ 4.300375] sdf1 sdf2 sdf3
[ 4.304590] sr 6:0:1:0: Attached scsi generic sg6 type 5
[ 4.304617] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 4.476381] async_tx: api initialized (async)
[ 4.482502] xor: automatically using best checksumming function: generic_sse
[ 4.531271] generic_sse: 4952.800 MB/sec
[ 4.532501] xor: using function: generic_sse (4952.800 MB/sec)
[ 4.620552] md: bind<sdc1>
[ 4.625595] md: bind<sdd1>
[ 4.631938] raid1: raid set md3 active with 2 out of 2 mirrors
[ 4.637911] md3: detected capacity change from 0 to 250056605696
[ 4.646749] md: bind<sda1>
[ 4.650471] md: bind<sda2>
[ 4.653337] md3: unknown partition table
[ 4.658814] md: bind<sdb1>
[ 4.662499] md: bind<sdf1>
[ 4.665564] md: bind<sda3>
[ 4.672760] raid1: raid set md0 active with 2 out of 2 mirrors
[ 4.678711] md0: detected capacity change from 0 to 526319616
[ 4.685618] md: bind<sdb2>
[ 4.690493] md0:
[ 4.698449] raid1: raid set md1 active with 2 out of 2 mirrors
[ 4.704436] md: bind<sdf2>
[ 4.704440] md1: detected capacity change from 0 to 19329318912
[ 4.711262] raid6: int64x1 2507 MB/s
[ 4.717481] md: bind<sde3>
[ 4.720941] md: bind<sdb3>
[ 4.726254] md1: unknown partition table
[ 4.731241] raid1: raid set md2 active with 2 out of 2 mirrors
[ 4.737236] md2: detected capacity change from 0 to 230200836096
[ 4.744078] md: bind<sdf3>
[ 4.748474] md2:
[ 4.751385] raid1: raid set md6 active with 2 out of 2 mirrors
[ 4.757582] md6: detected capacity change from 0 to 483605217280
[ 4.757604] unknown partition table
[ 4.770186] md6: unknown partition table
[ 4.862989] md: bind<sde1>
[ 4.868452] raid1: raid set md4 active with 2 out of 2 mirrors
[ 4.874499] md4: detected capacity change from 0 to 501612544
[ 4.880431] raid6: int64x2 3398 MB/s
[ 4.884726] md: bind<sde2>
[ 4.888517] md4: unknown partition table
[ 5.051267] raid6: int64x4 2662 MB/s
[ 5.221275] raid6: int64x8 2355 MB/s
[ 5.391269] raid6: sse2x1 3291 MB/s
[ 5.561272] raid6: sse2x2 4935 MB/s
[ 5.731269] raid6: sse2x4 4887 MB/s
[ 5.733771] raid6: using algorithm sse2x2 (4935 MB/s)
[ 5.746352] md: raid6 personality registered for level 6
[ 5.751576] raid1: raid set md5 active with 2 out of 2 mirrors
[ 5.751612] md5: detected capacity change from 0 to 15998058496
[ 5.751554] md: raid5 personality registered for level 5
[ 5.768322] md: raid4 personality registered for level 4
[ 5.776364] md5: unknown partition table
[ 5.790764] md: raid10 personality registered for level 10
[ 6.119867] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 6.126841] EXT4-fs (dm-0): write access will be enabled during recovery
[ 6.447532] EXT4-fs (dm-0): recovery complete
[ 6.476769] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 11.382063] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 11.495395] shpchp 0000:00:01.0: Cannot reserve MMIO region
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
init: procps main process (555) terminated with status 255
/dev/mapper/vg--grp--01--23--02--2-LogVol00: clean, 434432/29523968 files, 14057053/118067200 blocks
/dev/md4 has been mounted 38 times without being checked, check forced.
init: eucalyptus-network (lo) main process (1150) killed by TERM signal
init: eucalyptus-network (eth0) main process (1334) killed by TERM signal
/dev/md4: 220/122880 files (9.1% non-contiguous), 205802/489856 blocks
init: ureadahead-other main process (1448) terminated with status 4
init: tftpd-hpa main process (1459) terminated with status 66
init: tftpd-hpa main process ended, respawning
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
[ OK ]ting sensors limits
** (process:1593): WARNING **: Could not parse config file: Could not open config file /etc/nbd-server/config.
** Message: Nothing to do! Bye!
nbd-server.
[ OK ]rting internet superserver inetd
* Starting Postfix Mail Transport Agent postfix [ 39.003931] XENBUS: Unable to read cpu state
[ 39.008413] XENBUS: Unable to read cpu state
[ 39.020015] XENBUS: Unable to read cpu state
[ 39.024573] XENBUS: Unable to read cpu state
GR: minutes elapse until this prompt shows up:
Ubuntu lucid (development branch) grp-01-23-02 hvc0
grp-01-23-02 login:
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2010-05-05 0:42 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-23 17:50 Cannot load latest 2.6.32.10 kernel on AMD quad-core Gerry Reno
2010-04-23 18:27 ` Boris Derzhavets
2010-04-23 18:55 ` Boris Derzhavets
2010-04-23 20:38 ` Gerry Reno
2010-04-23 21:31 ` Boris Derzhavets
2010-04-24 6:12 ` Gerry Reno
2010-04-24 6:32 ` Gerry Reno
2010-04-24 7:34 ` Boris Derzhavets
2010-04-24 16:41 ` Gerry Reno
2010-04-24 17:30 ` Boris Derzhavets
2010-04-24 17:37 ` Boris Derzhavets
2010-04-24 17:41 ` Boris Derzhavets
2010-04-24 18:07 ` Gerry Reno
2010-04-24 18:18 ` Boris Derzhavets
2010-04-24 22:24 ` Gerry Reno
2010-04-25 6:44 ` Pasi Kärkkäinen
2010-04-25 11:16 ` Boris Derzhavets
2010-04-25 15:37 ` Gerry Reno
2010-04-25 16:10 ` Boris Derzhavets
2010-04-25 23:18 ` Mike Viau
2010-04-26 0:49 ` Gerry Reno
2010-04-26 2:10 ` Mike Viau
2010-04-26 2:18 ` Gerry Reno
2010-04-25 22:15 ` Gerry Reno
2010-04-26 2:10 ` Gerry Reno
2010-04-26 4:12 ` Gerry Reno
2010-04-26 20:04 ` Pasi Kärkkäinen
2010-04-26 21:26 ` Gerry Reno
2010-04-26 21:52 ` Pasi Kärkkäinen
2010-04-26 23:36 ` Gerry Reno
2010-04-27 0:00 ` Gerry Reno
2010-04-27 2:48 ` Gerry Reno
2010-04-27 9:15 ` Pasi Kärkkäinen
2010-04-27 17:35 ` Gerry Reno
2010-04-29 13:54 ` Gerry Reno
2010-04-29 14:41 ` Mike Viau
2010-04-29 14:46 ` Gerry Reno
2010-04-29 15:11 ` Mike Viau
2010-04-29 16:50 ` Gerry Reno
2010-04-25 6:53 ` Gerry Reno
2010-04-25 10:22 ` Pasi Kärkkäinen
2010-05-03 16:18 ` Konrad Rzeszutek Wilk
2010-05-03 17:18 ` Gerry Reno
2010-05-03 20:36 ` Konrad Rzeszutek Wilk
2010-05-03 21:23 ` Gerry Reno
2010-05-05 0:42 ` Gerry Reno [this message]
2010-05-05 17:54 ` AMD Phenom II 940: mm/vmalloc.c:110 vmap_page_range_noflush Konrad Rzeszutek Wilk
2010-05-06 3:18 ` Gerry Reno
2010-05-06 5:52 ` Pasi Kärkkäinen
2010-05-06 17:57 ` Jeremy Fitzhardinge
2010-05-06 19:39 ` Gerry Reno
2010-05-07 0:21 ` Gerry Reno
2010-05-07 2:22 ` Gerry Reno
2010-05-07 6:05 ` Pasi Kärkkäinen
2010-05-07 6:21 ` Boris Derzhavets
2010-05-07 16:44 ` Gerry Reno
2010-05-07 21:53 ` Gerry Reno
2010-05-08 7:20 ` Boris Derzhavets
2010-05-10 14:10 ` Konrad Rzeszutek Wilk
2010-05-10 16:03 ` Gerry Reno
2010-05-10 16:17 ` AMD Phenom II 940: Upgrade to 2.6.32.12 fixes it and upgrades CPU from 3.1Ghz to 1.2Thz! Konrad Rzeszutek Wilk
2010-05-10 16:40 ` Dan Magenheimer
2010-05-10 17:40 ` Gerry Reno
2010-05-10 17:56 ` Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BE0BEE7.50007@verizon.net \
--to=greno@verizon.net \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.