From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jiri.Pinkava@vscht.cz (Pinkava J.) Date: Thu, 6 May 2010 15:22:28 +0200 Subject: [PATCH 6/8] Add support for MMC card reader on Acer n30 / Acer n35 In-Reply-To: <4BE2C26E.2080508@vscht.cz> References: <4BE1EBFE.9080601@vscht.cz> <4BE1ED3E.1050201@vscht.cz> <4BE1ED86.3010506@vscht.cz> <4BE1EE5F.5090402@vscht.cz> <4BE1EE8C.8040900@vscht.cz> <20100506012258.GZ6684@trinity.fluff.org> <4BE2C18E.6080207@vscht.cz> <4BE2C1D7.4030408@vscht.cz> <4BE2C224.7080907@vscht.cz> <4BE2C24C.9050008@vscht.cz> <4BE2C26E.2080508@vscht.cz> Message-ID: <4BE2C294.7030300@vscht.cz> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Signed-off-by: Jiri Pinkava --- arch/arm/mach-s3c2410/mach-n30.c | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index d63b48f..81973aa 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -46,6 +47,7 @@ #include #include #include +#include #include #include @@ -350,6 +352,12 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = { .lpcsel = 0x06, }; +static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = { + .gpio_detect = S3C2410_GPF(1), + .gpio_wprotect = S3C2410_GPG(10), + .ocr_avail = MMC_VDD_32_33, +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -358,6 +366,7 @@ static struct platform_device *n30_devices[] __initdata = { &s3c_device_ohci, &s3c_device_rtc, &s3c_device_usbgadget, + &s3c_device_sdi, &n30_button_device, &n30_blue_led, &n30_warning_led, @@ -370,6 +379,7 @@ static struct platform_device *n35_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_usbgadget, + &s3c_device_sdi, &n35_button_device, &n35_blue_led, &n35_warning_led, @@ -538,6 +548,7 @@ static void __init n30_init(void) { s3c24xx_fb_set_platdata(&n30_fb_info); s3c24xx_udc_set_platdata(&n30_udc_cfg); + s3c24xx_mci_set_platdata(&n30_mci_cfg); s3c_i2c0_set_platdata(&n30_i2ccfg); /* Turn off suspend on both USB ports, and switch the -- 1.7.1