From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Schwade Date: Sun, 09 May 2010 20:19:11 +0000 Subject: [lm-sensors] No temperature output with k10temp for AMD II X3 435 Message-Id: <4BE718BF.4080101@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hello, I have an AMD II X3 435 cpu. Sensors-detect successfully detects the=20 k10temp module is needed. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... Success! (driver `k10temp') AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel Atom thermal sensor... No Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No I also checked that it is loaded correctly. [florian@errorkiste ~]$ lsmod |grep k10temp k10temp 2827 0 If I run sensors to get the temperature the output is just: [florian@errorkiste ~]$ sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +21.0=B0C (high =3D +70.0=B0C) 21=B0C is impossible to be the correct temperature. The BIOS reports my=20 CPU running at something like 36=B0. The Kernel is: 2.6.33-ARCH lm-sensors version: lm_sensors 3.1.2-1 I would appreciate any help. Thanks a lot! Regards _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors