[Hawkboard] OE u-boot image

[Christophe Aeschlimann <c.aeschlimann@acn-group.ch>]

Hi,

(sorry I sent that first to openembedded-users and to hawkboard google 
groups but the first one seems to be abandoned and the second needs 
users to be registered)

Did someone successfully booted the hawkboard through UART with the 
u-boot image built with OpenEmbedded ?

I generated a minimal-image with the following conf :

MACHINE = "hawkboard"
DISTRO = "angstrom-2008.1"

This generated the approriate kernel image and jffs2 file system and 
also a u-boot image :

u-boot-hawkboard-2009.08+gitr0d291f2f255e6d66a78b3dc2445362a96ae39a57-r49.bin

And I would like to boot the hawkboard through the serial port using the 
TI tools (aisgen and UART boot host) and this image.

So I followed what we can see on elinux.org/hawboard as for the AIS 
image generation. The hawkboard load the image (I get the BOOTME and the 
tool start to upload the code, jump and close the COM port) but then 
nothing happens when I open a console. (I should get the U-Boot prompt 
like I do when I boot with the AIS file delivered with the hawkboard)

Any clue ?

Regards,

-- 
Christophe Aeschlimann

Embedded Software Engineer

Advanced Communications Networks S.A.

Rue du Puits-Godet 8a
2000 Neuchâtel, Switzerland

Tél. +41 32 724 74 31

c.aeschlimann@acn-group.ch