From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751147Ab0E2EaP (ORCPT ); Sat, 29 May 2010 00:30:15 -0400 Received: from pindarots.xs4all.nl ([80.101.128.228]:50446 "EHLO pindarots.xs4all.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750722Ab0E2EaI (ORCPT ); Sat, 29 May 2010 00:30:08 -0400 Message-ID: <4C009845.3040404@xs4all.nl> Date: Sat, 29 May 2010 06:29:57 +0200 From: Udo van den Heuvel User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100430 Fedora/3.0.4-2.fc12 Lightning/1.0b2pre Thunderbird/3.0.4 MIME-Version: 1.0 To: Randy Dunlap CC: linux-kernel@vger.kernel.org Subject: Re: hpet timers gone? References: <4BFA52C3.4080006@xs4all.nl> <20100526120236.4a849b5b.randy.dunlap@oracle.com> In-Reply-To: <20100526120236.4a849b5b.randy.dunlap@oracle.com> X-Enigmail-Version: 1.0.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2010-05-26 21:02, Randy Dunlap wrote: > On Mon, 24 May 2010 12:19:47 +0200 Udo van den Heuvel wrote: >> What has happened between 2.6.30.9 and 2.6.32.8 with regard to hpet timers? >> >> dmesg output from 2.6.30.9 does show activity but 2.6.32.8 and beyond don't. >> Also /proc/timer_list doesn't show hpet anymore. Also on 2.6.34 no hpet >> in timer_list. >> >> relevant .config: >> CONFIG_HPET_TIMER=y >> CONFIG_HPET_EMULATE_RTC=y >> CONFIG_HPET=y >> CONFIG_HPET_MMAP=y > > Same here. > >> And I have hpet=force on the kernel commandline for this VIA Epia >> LT10000 board. >> >> Any ideas? (...) > > What does dmesg show on your machine? Please see below. The LT10000 replaced a VIA Epia EK8000 where hpet did work. LT10000 has VIA CX700 chips. Udo Linux version 2.6.34 (root@epia) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #6 PREEMPT Tue May 25 16:08:30 CEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) BIOS-e820: 000000003bfbe000 - 000000003bff0000 (ACPI NVS) BIOS-e820: 000000003bff0000 - 000000003c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3bfb0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03C000000 mask FFC000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 960MB, range: 64MB, type UC total RAM covered: 960M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 128M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 960MB, range: 64MB, type UC initial memory mapped : 0 - 01c00000 found SMP MP-table at [c00ff780] ff780 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 14000-19000 RAMDISK: 379be000 - 37ff0000 Allocated new RAMDISK: 00100000 - 007310d9 Move RAMDISK from 00000000379be000 - 0000000037fef0d8 to 00100000 - 007310d8 ACPI: RSDP 000f7ee0 00024 (v02 ACPIAM) ACPI: XSDT 3bfb0100 00044 (v01 A M I OEMXSDT 12000705 MSFT 00000097) ACPI: FACP 3bfb0290 000F4 (v03 A M I OEMFACP 12000705 MSFT 00000097) ACPI: DSDT 3bfb03f0 034F7 (v01 1ADEL 1ADEL007 00000007 INTL 02002026) ACPI: FACS 3bfbe000 00040 ACPI: APIC 3bfb0390 00054 (v01 A M I OEMAPIC 12000705 MSFT 00000097) ACPI: OEMB 3bfbe040 00046 (v01 A M I AMI_OEM 12000705 MSFT 00000097) ACPI: SSDT 3bfbe090 00175 (v01 AMI P001PM 00000001 INTL 20051117) ACPI: Local APIC address 0xfee00000 71MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003bfb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003bfb0 On node 0 totalpages: 245567 free_area_init_node: node 0, pgdat c13e6c94, node_mem_map c186f200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 144 pages used for memmap HighMem zone: 18210 pages, LIFO batch:3 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 early_res array is doubled to 64 at [15000 - 157ff] Allocating PCI resources starting at 3c000000 (gap: 3c000000:c2c00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243647 Kernel command line: ro root=LABEL=/ hisax=36,2 selinux=0 pci=usepirqmask audit=0 hpet=force usbcore.autosuspend=1 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax audit: disabled (until reboot) PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (36 early reservations) #1 [0001000000 - 00018651c8] TEXT DATA BSS #2 [0001866000 - 000186d1c1] BRK #3 [00000ff790 - 0000100000] BIOS reserved #4 [00000ff780 - 00000ff790] MP-table mpf #5 [000009fc00 - 00000fc6a0] BIOS reserved #6 [00000fc7c8 - 00000ff780] BIOS reserved #7 [00000fc6a0 - 00000fc7c8] MP-table mpc #8 [0000010000 - 0000014000] ACPI WAKEUP #9 [0000014000 - 0000015000] PGTABLE #10 [0000100000 - 0000732000] NEW RAMDISK #11 [000186e000 - 000186f000] BOOTMEM #12 [000186f000 - 0001fef000] BOOTMEM #13 [0001865200 - 0001865204] BOOTMEM #14 [0001865240 - 0001865480] BOOTMEM #15 [0001865480 - 00018654d4] BOOTMEM #16 [0001fef000 - 0001ff8000] BOOTMEM #17 [0001865500 - 0001865508] BOOTMEM #18 [0001ff8000 - 0001ff9200] BOOTMEM #19 [0001865540 - 0001865567] BOOTMEM #20 [0001865580 - 00018656b4] BOOTMEM #21 [00018656c0 - 0001865700] BOOTMEM #22 [0001865700 - 0001865740] BOOTMEM #23 [0001865740 - 0001865780] BOOTMEM #24 [0001865780 - 00018657c0] BOOTMEM #25 [00018657c0 - 0001865800] BOOTMEM #26 [0001865800 - 0001865840] BOOTMEM #27 [0001865840 - 0001865880] BOOTMEM #28 [0001865880 - 00018658c0] BOOTMEM #29 [00018658c0 - 0001865900] BOOTMEM #30 [0001865900 - 0001865940] BOOTMEM #31 [0001865940 - 00018659f0] BOOTMEM #32 [0001865a00 - 0001865ab0] BOOTMEM #33 [0001ff9200 - 0001ffd200] BOOTMEM #34 [0001ffd200 - 000207d200] BOOTMEM #35 [000207d200 - 00020bd200] BOOTMEM Initializing HighMem for node 0 (000377fe:0003bfb0) Memory: 958760k/982720k available (2515k kernel code, 23508k reserved, 1495k data, 328k init, 73416k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc13eb000 - 0xc143d000 ( 328 kB) .data : 0xc1274df7 - 0xc13eac9c (1495 kB) .text : 0xc1000000 - 0xc1274df7 (2515 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Experimental preemptable hierarchical RCU implementation. NR_IRQS:288 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes Fast TSC calibration using PIT Detected 997.437 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.87 BogoMIPS (lpj=3989748) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Performance Events: CPU: Centaur VIA Esther processor 1000MHz stepping 09 Checking 'hlt' instruction... OK. ACPI: Core revision 20100121 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - E7, should be 20 (20100121/tbutils-314) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x3c000000-0xffffffff] (ignored) pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] pci 0000:00:01.0: supports D1 pci 0000:00:0f.0: reg 20: [io 0xfc00-0xfc0f] pci 0000:00:10.0: reg 20: [io 0xec00-0xec1f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20: [io 0xe880-0xe89f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20: [io 0xe800-0xe81f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.4: reg 10: [mem 0xfebffc00-0xfebffcff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xbfffffff pref] pci 0000:01:00.0: reg 14: [mem 0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 30: [mem 0xfe8f0000-0xfe8fffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xfc800000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0x9ff00000-0xdfefffff pref] pci 0000:02:01.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:00:13.0: PCI bridge to [bus 02-02] pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:13.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:08.0: reg 10: [io 0xd800-0xd8ff] pci 0000:03:08.0: reg 14: [mem 0xfeaffc00-0xfeaffcff] pci 0000:03:08.0: supports D1 D2 pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:08.0: PME# disabled pci 0000:03:09.0: reg 10: [io 0xd400-0xd4ff] pci 0000:03:09.0: reg 14: [mem 0xfeaff800-0xfeaff8ff] pci 0000:03:09.0: supports D1 D2 pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:09.0: PME# disabled pci 0000:03:0f.0: reg 10: [mem 0xfeafe000-0xfeafefff] pci 0000:03:0f.0: reg 14: [io 0xd000-0xd0ff] pci 0000:00:13.1: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:13.1: bridge window [io 0xd000-0xdfff] pci 0000:00:13.1: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:13.1: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb LinuxPPS API ver. 1 registered Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000003bfb0000 - 000000003bffffff Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:06: IRQ 4 override to edge, high pnp 00:07: IRQ 3 override to edge, high pnp 00:08: IRQ 3 override to edge, high pnp 00:09: IRQ 3 override to edge, high pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:0b: [io 0x0a00-0x0a7f] has been reserved system 00:0c: [io 0x03e0-0x03e7] has been reserved system 00:0c: [io 0x04d0-0x04d1] has been reserved system 00:0c: [io 0x0800-0x087f] has been reserved system 00:0c: [io 0x0400-0x041f] has been reserved system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0e: [mem 0x00100000-0x3bffffff] could not be reserved pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xfc800000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0x9ff00000-0xdfefffff pref] pci 0000:00:13.0: PCI bridge to [bus 02-02] pci 0000:00:13.0: bridge window [io disabled] pci 0000:00:13.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:13.0: bridge window [mem pref disabled] pci 0000:00:13.1: PCI bridge to [bus 03-03] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff] pci 0000:00:13.1: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:13.1: bridge window [mem pref disabled] pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:13.0: setting latency timer to 64 pci 0000:00:13.1: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0x9ff00000-0xdfefffff pref] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030 pci 0000:00:10.0: Performing full reset pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030 pci 0000:00:10.1: Performing full reset pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030 pci 0000:00:10.2: Performing full reset pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6344k freed highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1741 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] Real Time Clock Driver v1.12b VIA RNG detected Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS2 at I/O 0xa80 (irq = 3) is a 16550A 00:09: ttyS3 at I/O 0xa88 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:0f.0: VIA cx700 (rev 00) IDE UDMA133 via82cxxx 0000:00:0f.0: IDE controller (0x1106:0x5324 rev 0x00) via82cxxx 0000:00:0f.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 ide1: BM-DMA at 0xfc08-0xfc0f Probing IDE interface ide0... Probing IDE interface ide1... hdc: WDC WD800JB-00JJA0, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63 hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 hdc14 hdc15 hdc16 > ide-cd driver 5.00 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine 0000:03:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 eth0: VIA Rhine III at 0xfeaffc00, 00:40:63:f6:02:00, IRQ 18. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. via-rhine 0000:03:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 eth1: VIA Rhine III at 0xfeaff800, 00:40:63:f6:02:01, IRQ 19. eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input3 PPS line discipline registered device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu padlock: Using VIA PadLock ACE for AES algorithm. padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms. nf_conntrack version 0.5.0 (15079 buckets, 60316 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 328k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 dracut: dracut-005-2.fc12 udev: starting version 145 dracut: Starting plymouth daemon uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: detected 2 ports uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.0: Performing full reset uhci_hcd 0000:00:10.0: supports USB remote wakeup uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34 uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: detected 2 ports uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.1: Performing full reset uhci_hcd 0000:00:10.1: supports USB remote wakeup uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880 usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34 uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:10.4: EHCI Host Controller drivers/usb/core/inode.c: creating file '003' ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:10.4: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024 ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:10.4: MWI active ehci_hcd 0000:00:10.4: supports USB remote wakeup ehci_hcd 0000:00:10.4: irq 23, io mem 0xfebffc00 ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb3: default language 0x0409 usb usb3: udev 1, busnum 3, minor = 256 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34 ehci_hcd usb usb3: SerialNumber: 0000:00:10.4 usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) uhci_hcd 0000:00:10.0: port 1 portsc 008a,00 uhci_hcd 0000:00:10.0: port 2 portsc 008a,00 uhci_hcd 0000:00:10.1: port 1 portsc 008a,00 uhci_hcd 0000:00:10.1: port 2 portsc 008a,00 hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 20ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.0 ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.1 uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: detected 2 ports uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.2: Performing full reset uhci_hcd 0000:00:10.2: supports USB remote wakeup uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800 usb usb4: default language 0x0409 usb usb4: udev 1, busnum 4, minor = 384 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.34 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.2 hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000 uhci_hcd 0000:00:10.2: port 1 portsc 008a,00 uhci_hcd 0000:00:10.2: port 2 portsc 008a,00 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 EXT3-fs (hdc5): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds dracut: Remounting /dev/disk/by-label/\x2f with -o noatime,ro EXT3-fs (hdc5): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds dracut: Mounted root filesystem /dev/hdc5 usb usb1: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) dracut: Loading SELinux policy dracut: /sbin/load_policy: Can't load policy: No such device dracut: Switching root udev: starting version 145 Modular ISDN core version 1.1.21 NET: Registered protocol family 34 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] VIA Graphics Intergration Chipset framebuffer 2.4 initializing ppdev: user-space parallel port driver Winbond W6692 PCI driver Rev. 2.0 w6692 0000:03:0f.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 mISDN_w6692: found adapter Dynalink/AsusCom IS64PH at 0000:03:0f.0 w6692.1: Winbond W6692 version: V00 W6692 1 cards installed viafb_init_dvi_size: DVI panel size undetected! udev: renamed network interface eth1 to eth0 udev: renamed network interface eth0_rename to eth1 HDA Intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:02:01.0: setting latency timer to 64 HDA Intel 0000:02:01.0: PCI: Disallowing DAC for device EXT3-fs (hdc5): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (hdc1): using internal journal EXT3-fs (hdc1): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (hdc7): using internal journal EXT3-fs (hdc7): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (hdc8): using internal journal EXT3-fs (hdc8): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (hdc6): using internal journal EXT3-fs (hdc6): mounted filesystem with writeback data mode EXT4-fs (hdc10): mounted filesystem with ordered data mode EXT4-fs (hdc11): mounted filesystem with ordered data mode EXT4-fs (hdc12): mounted filesystem with ordered data mode EXT4-fs (hdc13): mounted filesystem with ordered data mode EXT4-fs (hdc14): mounted filesystem with ordered data mode Adding 513036k swap on /dev/mapper/swap. Priority:-1 extents:1 across:513036k ip6_tables: (C) 2000-2006 Netfilter Core Team eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 eth1: link up, 100Mbps, full-duplex, lpa 0x41E1